SIST EN 61784-1:2010
(Main)Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-1:2010)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-1:2010)
This part of IEC 61784 defines a set of protocol specific communication profiles based primarily on the IEC 61158 series, to be used in the design of devices involved in communications in factory manufacturing and process control. Each profile selects specifications for the communications protocol stack at a device. It contains a minimal set of required services at the application layer and specification of options in intermediate layers defined through references. If no application layer is included, then a minimal set of required services at the Data-link layer is specified. The appropriate references to the protocol specific types are given in each communication profile family or associated profiles.
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile (IEC 61784-1:2010)
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain (CEI 61784-1:2010)
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC 61784-1:2010)
Ta del IEC 61784 določa nabor z protokolom določenih komunikacijskih profilov, uporabljenih predvsem na IEC 61158 seriji, za uporabo pri načrtovanju naprav, ki sodelujejo pri komunikacijah pri tovarniški proizvodnji in nadzoru procesov. Vsak profil izbere specifikacije za komunikacijski protokolni sklad pri napravi. Vsebuje minimalni nabor zahtevanih storitev na plasti uporabe in specifikacijo možnostih v srednjih plasteh, določenih preko sklicev. Če plast uporabe ni vključena, je določen minimalni nabor zahtevanih storitev na plasti podatkovne povezave. Primerno sklicevanje na za protokol značilne tipe je podane v vsaki družini komunikacijskih profilov ali v povezanih profilih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61784-1:2010
01-december-2010
1DGRPHãþD
SIST EN 61784-1:2008
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2010)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-
1:2010)
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile (IEC 61784-1:2010)
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
(CEI 61784-1:2010)
Ta slovenski standard je istoveten z: EN 61784-1:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61784-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61784-1:2010
---------------------- Page: 2 ----------------------
SIST EN 61784-1:2010
EUROPEAN STANDARD
EN 61784-1
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 35.100.20; 35.240.50 Supersedes EN 61784-1:2008
English version
Industrial communication networks -
Profiles -
Part 1: Fieldbus profiles
(IEC 61784-1:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 1: Profils pour les bus de terrain Teil 1: Feldbusprofile
(CEI 61784-1:2010) (IEC 61784-1:2010)
This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-1:2010 E
---------------------- Page: 3 ----------------------
SIST EN 61784-1:2010
EN 61784-1:2010 - 2 -
Foreword
The text of document 65C/600/FDIS, future edition 3 of IEC 61784-1, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-1 on 2010-09-01.
This European Standard supersedes EN 61784-1:2008.
The main changes with respect to the previous edition are listed below:
– update of the dated references to the EN 61158 series, to EN 61784-2, to the EN 61784-3 series, to
the EN 61784-5 series and to EN 61918 throughout the document;
– update of the titles of the referenced documents and references if needed;
– update of selection tables for CPF 1, CPF 2, CPF 5 and CPF 8.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60079-14:2007 NOTE Harmonized as EN 60079-14:2008 (not modified).
IEC 60079-25 NOTE Harmonized as EN 60079-25.
IEC 60793 series NOTE Harmonized in EN 60793 series (partially modified).
IEC 61131-3 NOTE Harmonized as EN 61131-3.
IEC/TR 61158-1:2010 NOTE Harmonized as CLC/TR 61158-1:2010 (not modified).
ISO/IEC 7498-1 NOTE Harmonized as EN ISO/IEC 7498-1.
__________
---------------------- Page: 4 ----------------------
SIST EN 61784-1:2010
- 3 - EN 61784-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60079-11 - Explosive atmospheres - EN 60079-11 -
Part 11: Equipment protection by intrinsic
safety "i"
IEC 60079-27 - Explosive atmospheres - EN 60079-27 -
Part 27: Fieldbus intrinsically safe concept
(FISCO)
IEC 61010 Series Safety requirements for electrical equipment EN 61010 Series
for measurement, control and laboratory use
IEC 61131-2 - Programmable controllers - EN 61131-2 -
Part 2: Equipment requirements and tests
IEC 61158-2 2010 Industrial communication networks - Fieldbus EN 61158-2 2010
specifications -
Part 2: Physical layer specification and service
definition
IEC 61158-3-1 2007 Industrial communication networks - Fieldbus EN 61158-3-1 2008
specifications -
Part 3-1: Data-link layer service definition -
Type 1 elements
IEC 61158-3-2 2007 Industrial communication networks - Fieldbus EN 61158-3-2 2008
specifications -
Part 3-2: Data-link layer service definition -
Type 2 elements
IEC 61158-3-3 2007 Industrial communication networks - Fieldbus EN 61158-3-3 2008
specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
IEC 61158-3-4 2007 Industrial communication networks - Fieldbus EN 61158-3-4 2008
specifications -
Part 3-4: Data-link layer service definition -
Type 4 elements
IEC 61158-3-7 2007 Industrial communication networks - Fieldbus EN 61158-3-7 2008
specifications -
Part 3-7: Data-link layer service definition -
Type 7 elements
IEC 61158-3-8 2007 Industrial communication networks - Fieldbus EN 61158-3-8 2008
specifications -
Part 3-8: Data-link layer service definition -
Type 8 elements
---------------------- Page: 5 ----------------------
SIST EN 61784-1:2010
EN 61784-1:2010 - 4 -
Publication Year Title EN/HD Year
IEC 61158-3-16 2007 Industrial communication networks - Fieldbus EN 61158-3-16 2008
specifications -
Part 3-16: Data-link layer service definition -
Type 16 elements
IEC 61158-3-18 2007 Industrial communication networks - Fieldbus EN 61158-3-18 2008
specifications -
Part 3-18: Data-link layer service definition -
Type 18 elements
IEC 61158-4-1 2007 Industrial communication networks - Fieldbus EN 61158-4-1 2008
specifications -
Part 4-1: Data-link layer protocol specification
- Type 1 elements
IEC 61158-4-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-2: Data-link layer protocol specification
- Type 2 elements
IEC 61158-4-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-3: Data-link layer protocol specification
- Type 3 elements
IEC 61158-4-4 2007 Industrial communication networks - Fieldbus EN 61158-4-4 2008
specifications -
Part 4-4: Data-link layer protocol specification
- Type 4 elements
IEC 61158-4-7 2007 Industrial communication networks - Fieldbus EN 61158-4-7 2008
specifications -
Part 4-7: Data-link layer protocol specification
- Type 7 elements
IEC 61158-4-8 2007 Industrial communication networks - Fieldbus EN 61158-4-8 2008
specifications -
Part 4-8: Data-link layer protocol specification
- Type 8 elements
IEC 61158-4-16 2007 Industrial communication networks - Fieldbus EN 61158-4-16 2008
specifications -
Part 4-16: Data-link layer protocol
specification - Type 16 elements
IEC 61158-4-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-18: Data-link layer protocol
specification - Type 18 elements
IEC 61158-5-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-2: Application layer service definition -
Type 2 elements
IEC 61158-5-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-3: Application layer service definition -
Type 3 elements
IEC 61158-5-4 2007 Industrial communication networks - Fieldbus EN 61158-5-4 2008
specifications -
Part 5-4: Application layer service definition -
Type 4 elements
---------------------- Page: 6 ----------------------
SIST EN 61784-1:2010
- 5 - EN 61784-1:2010
Publication Year Title EN/HD Year
IEC 61158-5-5 2007 Industrial communication networks - Fieldbus EN 61158-5-5 2008
specifications -
Part 5-5: Application layer service definition -
Type 5 elements
IEC 61158-5-7 2007 Industrial communication networks - Fieldbus EN 61158-5-7 2008
specifications -
Part 5-7: Application layer service definition -
Type 7 elements
IEC 61158-5-8 2007 Industrial communication networks - Fieldbus EN 61158-5-8 2008
specifications -
Part 5-8: Application layer service definition -
Type 8 elements
IEC 61158-5-9 2007 Industrial communication networks - Fieldbus EN 61158-5-9 2008
specifications -
Part 5-9: Application layer service definition -
Type 9 elements
IEC 61158-5-10 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-10: Application layer service definition -
Type 10 elements
IEC 61158-5-16 2007 Industrial communication networks - Fieldbus EN 61158-5-16 2008
specifications -
Part 5-16: Application layer service definition -
Type 16 elements
IEC 61158-5-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-18: Application layer service definition -
Type 18 elements
IEC 61158-5-20 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-20: Application layer service definition -
Type 20 elements
IEC 61158-6-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-2: Application layer protocol
specification - Type 2 elements
IEC 61158-6-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
IEC 61158-6-4 2007 Industrial communication networks - Fieldbus EN 61158-6-4 2008
specifications -
Part 6-4: Application layer protocol
specification - Type 4 elements
IEC 61158-6-5 2007 Industrial communication networks - Fieldbus EN 61158-6-5 2008
specifications -
Part 6-5: Application layer protocol
specification - Type 5 elements
IEC 61158-6-7 2007 Industrial communication networks - Fieldbus EN 61158-6-7 2008
specifications -
Part 6-7: Application layer protocol
specification - Type 7 elements
---------------------- Page: 7 ----------------------
SIST EN 61784-1:2010
EN 61784-1:2010 - 6 -
Publication Year Title EN/HD Year
IEC 61158-6-8 2007 Industrial communication networks - Fieldbus EN 61158-6-8 2008
specifications -
Part 6-8: Application layer protocol
specification - Type 8 elements
IEC 61158-6-9 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-9: Application layer protocol
specification - Type 9 elements
IEC 61158-6-10 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements
IEC 61158-6-16 2007 Industrial communication networks - Fieldbus EN 61158-6-16 2008
specifications -
Part 6-16: Application layer protocol
specification - Type 16 elements
IEC 61158-6-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-18: Application layer protocol
specification - Type 18 elements
IEC 61158-6-20 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-20: Application layer protocol
specification - Type 20 elements
IEC 61784-2 2010 Industrial communication networks - Profiles - EN 61784-2 2010
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3
IEC 61784-5-2 2010 Industrial communication networks - Profiles - - -
Part 5-2: Installation of fieldbuses - Installation
profiles for CPF 2
IEC 61918 (mod) 2010 Industrial communication networks - prEN 61918 2009
Installation of communication networks in
industrial premises
IEC 62026-3 - Low-voltage switchgear and controlgear - EN 62026-3 -
Controller-device interfaces (CDIs) -
Part 3: DeviceNet
ISO/IEC 8802-2 1998 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 2: Logical link control
ISO/IEC 8802-3 2000 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications
ISO 15745-3 2003 Industrial automation systems and integration - -
- Open systems application integration
framework -
Part 3: Reference description for IEC 61158
based control systems
---------------------- Page: 8 ----------------------
SIST EN 61784-1:2010
- 7 - EN 61784-1:2010
Publication Year Title EN/HD Year
ISO 15745-4 2003 Industrial automation systems and integration - -
- Open systems application integration
framework -
Part 4: Reference description for Ethernet-
based control systems
ANSI TIA/EIA-232-F 1997 Interface between data terminal equipment - -
and data circuit - Terminating equipment
employing serial binary data interchange
ANSI TIA/EIA-485-A 1998 Electrical Characteristics of Generators and - -
Receivers for Use in Balanced Digital
Multipoint Systems
IEEE 802.3 2002 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) - Access
Method and Physical Layer Specifications
IETF RFC 768 - User Datagram Protocol - -
IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
IETF RFC 792 - Internet Control Message Protocol - -
IETF RFC 793 - Transmission Control Protocol - DARPA - -
Internet Program Protocol Specification
IETF RFC 826 - Ethernet Address Resolution Protocol - -
IETF RFC 894 - Standard for the Transmission of IP - -
Datagrams over Ethernet Networks
IETF RFC 1112 - Host Extensions for IP Multicasting - -
IETF RFC 1123 - Requirements for Internet Hosts - Application - -
and Support
IETF RFC 1122 - Requirements for Internet Hosts - - -
Communication Layers
IETF RFC 1127 - Perspective on the Host Requirements RFCs - -
IETF RFC 2236 - Internet Group Management Protocol A - -
---------------------- Page: 9 ----------------------
SIST EN 61784-1:2010
---------------------- Page: 10 ----------------------
SIST EN 61784-1:2010
IEC 61784-1
®
Edition 3.0 2010-07
INTERNATIONAL
STANDARD
Industrial communication networks – Profiles –
Part 1: Fieldbus profiles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XL
ICS 35.100.20, 35.240.50 ISBN 978-2-88912-062-8
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 11 ----------------------
SIST EN 61784-1:2010
– 2 – 61784-1 © IEC:2010(E)
CONTENTS
FOREWORD.13
INTRODUCTION.15
1 Scope.16
2 Normative references .17
3 Definitions .21
3.1 Terms and definitions .21
3.2 Abbreviations and symbols.21
3.2.1 IEC 61158 abbreviations and symbols .21
3.2.2 Other abbreviations and symbols.21
3.3 Conventions .22
3.3.1 Conventions common to all layers .22
3.3.2 Physical layer .23
3.3.3 Data-link layer .23
3.3.4 Application layer.24
4 Conformance to communication profiles .24
5 Communication Profile Family 1 (FOUNDATION® Fieldbus) .25
5.1 General overview .25
5.2 Profile 1/1 (FF H1).26
5.2.1 Physical layer .26
5.2.2 Data-link layer .41
5.2.3 Application layer.105
5.3 Profile 1/2 (FF HSE) .106
5.3.1 Physical layer .106
5.3.2 Data-link layer .106
5.3.3 Network layer .106
5.3.4 Transport layer .106
5.3.5 Application layer.107
5.4 Profile 1/3 (FF H2).107
5.4.1 Physical layer .107
5.4.2 Data-link layer .109
5.4.3 Application layer.109
6 Communication Profile Family 2 (CIP™).109
6.1 General overview .109
6.2 Profile 2/1 (ControlNet) .110
6.2.1 Physical layer .110
6.2.2 Data-link layer .111
6.2.3 Application layer.113
6.3 Profile 2/2 (EtherNet/IP) .114
6.3.1 Physical layer .114
6.3.2 Data-link layer .114
6.3.3 Application layer.115
6.4 Profile 2/3 (DeviceNet) .116
6.4.1 Physical layer .116
6.4.2 Data-link layer .116
6.4.3 Application layer.117
7 Communication Profile Family 3 (PROFIBUS & PROFINET) .119
---------------------- Page: 12 ----------------------
SIST EN 61784-1:2010
61784-1 © IEC:2010(E) – 3 –
7.1 General overview .119
7.2 Profile 3/1 (PROFIBUS DP) .121
7.2.1 Physical layer .121
7.2.2 Data-link layer .123
7.2.3 Application layer.142
7.3 Profile 3/2 (PROFIBUS PA) .188
7.3.1 Physical layer .188
7.3.2 Data-link layer .191
7.3.3 Application layer.201
7.4 Profile 3/3 (PROFINET CBA) .201
7.4.1 Physical layer .201
7.4.2 Data-link layer .201
7.4.3 Application layer.202
8 Communication Profile Family 4 (P-NET®) .203
8.1 General overview .203
8.2 Profile 4/1 (P-NET RS-485) .203
8.2.1 Physical layer .203
8.2.2 Data-link layer .204
8.2.3 Application layer.205
8.3 Profile 4/2 (P-NET RS-232) .206
8.3.1 Physical layer .206
8.3.2 Data-link layer .207
8.3.3 Application layer.207
9 Communication Profile Family 5 (WorldFIP®) .208
9.1 General overview .208
9.2 Profile 5/1 (WorldFIP).209
9.2.1 Physical layer .209
9.2.2 Data-link layer .210
9.2.3 Application layer.212
9.3 Profile 5/2 (WorldFIP).217
9.3.1 Physical layer .217
9.3.2 Data-link layer .217
9.3.3 Application layer.217
9.4 Profile 5/3 (WorldFIP).221
9.4.1 Physical layer .221
9.4.2 Data-link layer .222
9.4.3 Application layer.222
10 Communication Profile Family 6 (INTERBUS®) .223
10.1 General overview .223
10.2 Profile 6/1 .224
10.2.1 Physical layer .224
10.2.2 Data-link layer .225
10.2.3 Application layer.226
10.3 Profile 6/2 .227
10.3.1 Physical layer .227
10.3.2 Data-link layer .227
10.3.3 Application layer.228
10.4 Profile 6/3 .230
10.4.1 Physical layer .230
---------------------- Page: 13 ----------------------
SIST EN 61784-1:2010
– 4 – 61784-1 © IEC:2010(E)
10.4.2 Data-link layer .230
10.4.3 Application layer.231
11 Communication Profile Family 7 (This Clause has been removed) . 232
12 Communication Profile Family 8 (CC-Link) .232
12.1 General overview .232
12.1.1 General .232
12.1.2 Profile 8/1.232
12.1.3 Profile 8/2.233
12.1.4 Profile 8/3.233
12.2 Profile 8/1 .233
12.2.1 Physical layer .233
12.2.2 Data-link layer .234
12.2.3 Application layer.236
12.3 Profile 8/2 .239
12.3.1 Physical layer .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.