SIST EN 61784-1:2008
Industrial communication networks - Profiles -- Part 1: Fieldbus profiles
Industrial communication networks - Profiles -- Part 1: Fieldbus profiles
This part of IEC 61784 defines a set of protocol specific communication profiles based primarily on the IEC 61158 series, to be used in the design of devices involved in communications in factory manufacturing and process control. Each profile selects specifications for the communications protocol stack at a device. It contains a minimal set of required services at the Application Layer and specification of options in intermediate layers defined through references. If no Application Layer is included, then a minimal set of required services at the Data-link layer is specified. The appropriate references to the protocol specific types are given in each communication profile family or associated profiles.
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC 61784-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61784-1:2008
01-september-2008
1DGRPHãþD
SIST EN 61491:2001
SIST EN 61784-1:2004
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2007)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
Ta slovenski standard je istoveten z: EN 61784-1:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61784-1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61784-1:2008
---------------------- Page: 2 ----------------------
SIST EN 61784-1:2008
EUROPEAN STANDARD
EN 61784-1
NORME EUROPÉENNE
June 2008
EUROPÄISCHE NORM
ICS 35.240.50; 35.100.20 Supersedes EN 61491:1998 (partially) and EN 61784-1:2004
English version
Industrial communication networks -
Profiles -
Part 1: Fieldbus profiles
(IEC 61784-1:2007)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 1: Profils pour les bus de terrain Teil 1: Feldbusprofile
(CEI 61784-1:2007) (IEC 61784-1:2007)
This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-1:2008 E
---------------------- Page: 3 ----------------------
SIST EN 61784-1:2008
EN 61784-1:2008 - 2 -
Foreword
The text of document 65C/294/FDIS, future edition 2 of IEC 61784-1, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-1 on 2008-05-01.
This European Standard supersedes EN 61784-1:2004 + corrigendum December 2004.
This standard also partially replaces EN 61491:1998 which is at present being revised (to be issued as a
Technical Report).
EN 61784-1:2008 includes the following significant technical changes from EN 61784-1:2004:
– partition of EN 61158 Parts 3, 4 ,5, and 6 into multiple parts numbered for example EN 61158-6-1,
-6-2, -6-3, …;
– deletion of Type 6 fieldbus in EN 61158 series and CPF 7 for lack of market relevance;
– addition of new types of fieldbuses in EN 61158 series leading to new CPF 8, 9, and 16.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793 NOTE Harmonized in EN 60793 series (partially modified).
IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified).
ISO/IEC 9506-1 NOTE Harmonized as EN ISO/IEC 29506-1:1993 (not modified).
ISO/IEC 9506-2 NOTE Harmonized as EN ISO/IEC 29506-2:1990 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 61784-1:2008
- 3 - EN 61784-1:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60079-11 - Explosive atmospheres - EN 60079-11 2007
Part 11: Equipment protection by intrinsic
safety "i"
IEC 60079-14 2002 Electrical apparatus for explosive gas EN 60079-14 2003
atmospheres -
Part 14: Electrical installations in hazardous
areas (other than mines)
1) 2)
IEC 60079-25 - Electrical apparatus for explosive gas EN 60079-25 2004
atmospheres - + corr. April 2006
Part 25: Intrinsically safe systems
1)
IEC 60079-27 - Explosive atmospheres - EN 60079-27 2008
Part 27: Fieldbus intrinsically safe concept
(FISCO)
IEC 61010 Series Safety requirements for electrical equipment EN 61010 Series
for measurement, control, and laboratory
use
1)
IEC 61131-2 - Programmable controllers - EN 61131-2 2007
Part 2: Equipment requirements and tests
IEC 61158 Series Industrial communication networks - EN 61158 Series
Fieldbus specifications
1)
IEC 61784-2 - Industrial communication networks - EN 61784-2 2008
Profiles -
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3
1)
IEC 61784-5-2 - Industrial communication networks - EN 61784-5-2 2008
Profiles -
Part 5-2: Installation of fieldbuses - Installation
profiles for CPF 2
1)
IEC 61918 (mod) - Industrial communication networks - EN 61918 2008
Installation of communication networks in
industrial premises
1) 3)
IEC 62026-3 - Low-voltage switchgear and controlgear - EN 62026-3 -
Controller-device interfaces (CDIs) -
Part 3: DeviceNet
1)
Undated reference.
2)
Valid edition at date of issue.
3)
At draft stage.
---------------------- Page: 5 ----------------------
SIST EN 61784-1:2008
EN 61784-1:2008 - 4 -
Publication Year Title EN/HD Year
1) 2)
ISO/IEC 7498-1 - Information technology - Open Systems EN ISO/IEC 7498-1 1995
Interconnection - Basic Reference Model:
The Basic Model
1)
ISO/IEC 7498-2 - Information processing systems - Open - -
systems interconnection - Basic reference
model -
Part 2: Security architecture
1)
ISO/IEC 7498-3 - Information technology - Open systems - -
interconnection - Basic reference model -
Part 3: Naming and addressing
ISO/IEC 8802-2 1998 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 2: Logical link control
ISO/IEC 8802-3 2000 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications
1)
ISO 11898-1 - Road vehicles - Controller area network - -
(CAN) -
Part 1: Data link layer and physical signalling
1)
ISO 11898-2 - Road vehicles - Controller area network - -
(CAN) -
Part 2: High-speed medium access unit
1)
ISO 15745-3 - Industrial automation systems and - -
integration - Open systems application
integration framework -
Part 3: Reference description for IEC 61158
based control systems
ISO 15745-4 2003 Industrial automation systems and - -
A1 2006 integration - Open systems application
integration framework -
Part 4: Reference description for Ethernet-
based control systems
ANSI TIA/EIA-232-F 1997 Interface between data terminal equipment - -
and data circuit - Terminating equipment
employing serial binary data interchange
ANSI TIA/EIA-422-B 1994 Electrical characteristics of balanced voltage - -
digital interface circuits
ANSI TIA/EIA-485-A 1998 Electrical Characteristics of Generators and - -
Receivers for Use in Balanced Digital
Multipoint Systems
IEEE 802.3 2002 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) - Access
Method and Physical Layer Specifications
---------------------- Page: 6 ----------------------
SIST EN 61784-1:2008
- 5 - EN 61784-1:2008
Publication Year Title EN/HD Year
1)
IETF RFC - Internet Engineering Task Force - Request - -
for Comments
1)
IETF RFC 768 - User Datagram Protocol - -
1)
IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
1)
IETF RFC 792 - Internet Control Message Protocol - DARPA - -
Internet Program Protocol Specification
1)
IETF RFC 793 - Transmission Control Protocol - DARPA - -
Internet Program Protocol Specification
1)
IETF RFC 826 - Ethernet Address Resolution Protocol - - -
Converting Network Protocol Addresses to
48.bit Ethernet Address for Transmission on
Ethernet Hardware
1)
IETF RFC 894 - Standard for the Transmission of IP - -
Datagrams over Ethernet Networks
1)
IETF RFC 1112 - Host Extensions for IP Multicasting - -
1)
IETF RFC 1122 - Requirements for Internet Hosts - - -
Communication Layers
1)
IETF RFC 1123 - Requirements for Internet Hosts - Application - -
and Support
1)
IETF RFC 1127 - A Perspective on the Host Requirements - -
RFCs
1)
IETF RFC 2236 - Internet Group Management Protocol - - -
Version 2
---------------------- Page: 7 ----------------------
SIST EN 61784-1:2008
---------------------- Page: 8 ----------------------
SIST EN 61784-1:2008
IEC 61784-1
Edition 2.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Profiles –
Part 1: Fieldbus profiles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XL
ICS 35.240.50; 35.100.20 ISBN 2-8318-9378-X
---------------------- Page: 9 ----------------------
SIST EN 61784-1:2008
– 2 – 61784-1 © IEC:2007(E)
CONTENTS
FOREWORD.12
INTRODUCTION.14
1 Scope.15
2 Normative references .16
3 Definitions .18
3.1 Terms and definitions .18
3.2 Abbreviations and symbols.18
3.3 Conventions .19
4 Conformance to communication profiles .21
5 Communication Profile Family 1 (FOUNDATION® Fieldbus) .22
5.1 General overview .22
5.2 Profile 1/1 (FF H1).23
5.3 Profile 1/2 (FF HSE) .105
5.4 Profile 1/3 (FF H2).106
6 Communication Profile Family 2 (CIP™).109
6.1 General overview .109
6.2 Profile 2/1 (ControlNet) .110
6.3 Profile 2/2 (EtherNet/IP) .113
6.4 Profile 2/3 (DeviceNet) .115
7 Communication Profile Family 3 (PROFIBUS & PROFINET) .119
7.1 General overview .119
7.2 Profile 3/1 (PROFIBUS DP) .120
7.3 Profile 3/2 (PROFIBUS PA) .188
7.4 Profile 3/3 (PROFINET CBA) .201
8 Communication Profile Family 4 (P-NET®) .203
8.1 General overview .203
8.2 Profile 4/1 (P-NET RS-485) .203
8.3 Profile 4/2 (P-NET RS-232) .206
9 Communication Profile Family 5 (WorldFIP®) .208
9.1 General overview .208
9.2 Profile 5/1 (WorldFIP).209
9.3 Profile 5/2 (WorldFIP).217
9.4 Profile 5/3 (WorldFIP).222
10 Communication Profile Family 6 (INTERBUS®) .223
10.1 General overview .223
10.2 Profile 6/1 .224
10.3 Profile 6/2 .227
10.4 Profile 6/3 .230
11 Communication Profile Family 7 (This Clause has been removed) . 232
12 Communication Profile Family 8 (CC-Link) .232
12.1 General overview .232
12.2 Profile 8/1 .233
12.3 Profile 8/2 .239
12.4 Profile 8/3 .239
---------------------- Page: 10 ----------------------
SIST EN 61784-1:2008
61784-1 © IEC:2007(E) – 3 –
13 Communication Profile Family 9 (HART).245
13.1 General Overview.245
13.2 Profile 9/1, universal command .245
14 Communication Profile Family 16 (SERCOS).247
14.1 General overview .247
14.2 Profile 16/1 (SERCOS I).247
14.3 Profile 16/2 (SERCOS II).249
Annex A (informative) Communication concepts .251
A.1 CPF 1 (FOUNDATION Fieldbus) communication concepts. 251
A.2 CPF 2 (CIP) communication concepts .252
A.3 CPF 3 (PROFIBUS & PROFINET) communication concepts . 255
A.4 CPF 4 (P-NET) communication concepts .257
A.5 CPF 5 (WorldFIP) communication concepts.259
A.6 CPF 6 (INTERBUS) communication concepts .260
A.7 CPF 8 (CC-LINK) communication concepts.261
A.8 CPF 9 (HART) communication concepts .262
A.9 CPF 16 (SERCOS) communication concepts .262
Annex B (informative) Added value of IEC 61784-1.265
Bibliography.266
Figure 1 — Communication profile families and profiles .15
Figure 2 — Example optical power budget for a 100/140 μm fibre system with a 16/16
optical passive star coupler.37
Figure 3 — CP 3/2 Slave devices usable in applications . 120
Figure A.1 — Ring structure.263
Figure A.2 — Topology example .263
16
Table 1 — Relations of Communication Profile Families to type numbers.
Table 2 — Layout of profile (sub)clause selection tables.19
Table 3 — Contents of (sub)clause selection tables.19
Table 4 — Layout of service selection tables .20
Table 5 — Contents of service selection tables.20
Table 6 — Layout of parameter selection tables.20
Table 7 — Contents of parameter selection tables .20
Table 8 — Layout of class attribute selection tables.21
Table 9 — Contents of class attribute selection tables .21
Table 10 — CPF 1: overview of profile sets .23
Table 11 — CP 1/1: PhL selection for communicating devices and their MAUs .23
Table 12 — CP 1/1: PhL classification of MAUs and attached devices .25
Table 13 — CP 1/1: PhL selection of Clause 16 for devices and their MAUs .25
Table 14 — CP 1/1: PhL selection of Clause 12 for devices and their MAUs .26
Table 15 — CP 1/1: PhL selection of Clause 21 for devices and their MAUs
(denigrated) .27
---------------------- Page: 11 ----------------------
SIST EN 61784-1:2008
– 4 – 61784-1 © IEC:2007(E)
Table 16 — CP 1/1: PhL selection of recommended IS parameters for FF MAU classes
111, 112, 121, 122, 511 and 512 .28
Table 17 — CP 1/1: PhL selection for media components .29
Table 18 — CP 1/1: PhL selection of imperative IS parameters for media in FISCO
systems .29
Table 19 — CP 1/1: PhL selection for power supplies .30
Table 20 — CP 1/1: PhL selection of power supply types.30
Table 21 — CP 1/1: PhL selection of permissible output voltage and IS parameters for
FISCO power supplies .31
Table 22 — CP 1/1: PhL selection for terminators.32
Table 23 — CP 1/1: PhL selection of IS parameters for terminators .32
Table 24 — CP 1/1: PhL selection of Clause 12 for intrinsic safety barriers .33
Table 25 — CP 1/1: PhL selection of recommended IS parameters for intrinsic safety
barriers and galvanic isolators (Entity model only) .34
Table 26 — CP 1/1: PhL selection of Clause 12 for intrinsically safe galvanic isolators.35
Table 27 — CP 1/1: PhL selection of Clause 15, recommended optical fibre types.36
Table 28 — CP 1/1: PhL selection of passive star couplers, recommended maximum
insertion loss .36
Table 29 — CP 1/1: PhL selection of active star couplers .36
Table 30 — CP 1/1: Optical power budget considerations .37
Table 31 — CP 1/1: DLL service selection .38
Table 32 — CP 1/1: DLL service selection of Clause 5 .38
Table 33 — CP 1/1: DLL service selection of 5.4 .38
Table 34 — CP 1/1: DLL service selection of 5.4.1 .38
Table 35 — CP 1/1: DLL service selection of 5.4.3 .39
Table 36 — CP 1/1: DLL service selection of 5.4.6 .39
Table 37 — CP 1/1: DLL service selection of Clause 6 .40
Table 38 — CP 1/1: DLL service selection of the summary of 6.3, DL-connection QoS .40
Table 39 — CP 1/1: DLL service selection of figures 11—16 of 6.4.41
Table 40 — CP 1/1: DLL service selection of 6.5 .41
Table 41 — CP 1/1: DLL service selection: replacement for Table 13 of 6.5.42
Table 42 — CP 1/1: DLL service selection of 6.5, replacement for Table 14.42
Table 43 — CP 1/1: DLL service selection of 6.5 for use of addresses for peer DLC.43
Table 44 — CP 1/1: DLL service selection of 6.5 for use of addresses for multipeer
DLC connect request at publisher .43
Table 45 — CP 1/1: DLL service selection of 6.5 for use of addresses for multipeer
DLC connect request at subscriber .43
Table 46 — CP 1/1: DLL service selection of 6.6 .43
Table 47 — CP 1/1: DLL service selection: replacement for Table 15 of 6.6.44
Table 48 — CP 1/1: DLL service selection of 6.7 .44
Table 49 — CP 1/1: DLL service selection of 6.7, replacement for Table 16.44
Table 50 — CP 1/1: DLL service selection of 6.7, replacement for Table 17.44
Table 51 — CP 1/1: DLL service selection of 6.7, replacement for Table 18.45
Table 52 — CP 1/1: DLL service selection of Clause 7 .45
Table 53 — CP 1/1: DLL service selection of 7.5, replacement for Table 23.46
---------------------- Page: 12 ----------------------
SIST EN 61784-1:2008
61784-1 © IEC:2007(E) – 5 –
Table 54 — CP 1/1: DLL service selection of Clause 8 .46
Table 55 — CP 1/1: DLL service selection of 8.5, replacement for Table 28.46
Table 56 — CP 1/1: DLL protocol selection.47
Table 57 — CP 1/1: DLL protocol selection of Clause 4 .47
Table 58 — CP 1/1: DLL protocol selection of 4.3 .48
Table 59 — CP 1/1: DLL protocol selection of 4.3.2.1 for use of link designators .48
Table 60 — CP 1/1: DLL protocol selection of 4.3.2.2 for use of node designators.48
Table 61 — CP 1/1: DLL protocol selection of 4.3.3.1 for predefined flat non—local
DL-addresses .48
Table 62 — CP 1/1: DLL protocol selection of 4.3.3.2 for predefined flat link—local
DL-addresses .49
Table 63 — CP 1/1: DLL protocol selection of 4.3.3.3 for predefined node—local
DL-addresses .49
Table 64 — CP 1/1: DLL protocol selection of 4.7 .50
Table 65 — CP 1/1: DLL protocol selection of 4.7.4 .51
Table 66 — CP 1/1: DLL protocol selection of 4.7.5 .52
Table 67 — CP 1/1: DLL protocol selection of Clause 6 .53
Table 68 — CP 1/1: DLL protocol selection, replacement for Table 10 of 6.0 .54
Table 69 — CP 1/1: DLL protocol selection of 6.5 .55
Table 70 — CP 1/1: DLL protocol selection of 6.7 .58
Table 71 — CP 1/1: DLL protocol selection of 6.8 .62
Table 72 — CP 1/1: DLL protocol selection of 6.11 .63
Table 73 — CP 1/1: DLL protocol selection of 6.12 .63
Table 74 — CP 1/1: DLL protocol selection of 6.15 .64
Table 75 — CP 1/1: DLL protocol selection of 6.20 .65
Table 76 — CP 1/1: DLL protocol selection of Clause 7 .66
Table 77 — CP 1/1: DLL protocol selection of 7.4 .67
Table 78 — CP 1/1: DLL protocol selection of Clause 8 .68
Table 79 — CP 1/1: DLL protocol selection of 8.2 .69
Table 80 — CP
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.