kSIST FprEN 17348:2022
(Main)Requirements for design and testing of vacuum cleaners and dust collectors for use in potentially explosive atmospheres
Requirements for design and testing of vacuum cleaners and dust collectors for use in potentially explosive atmospheres
This European Standard specifies requirements for design, construction, testing and marking of
handheld, portable and transportable vacuum cleaners and dust collectors, including their
accessories, constructed to Group II categories 2G and 3G and to Group II categories 2D and 3D,
intended for the collection of combustible or non-combustible dusts and flammable or non260
flammable liquids in potentially explosive atmospheres. A potentially explosive atmosphere may be
generated by the equipment during its intended use. It covers equipment driven by electricity and
by pneumatic power.
This European Standard deals with all significant hazards, hazardous situations and events
relevant to vacuum cleaners and dust collectors, when they are used as intended and under
conditions of misuse which are reasonably foreseeable by the manufacturer.
Typical applications for the concerned equipment are:
- Collection of dust produced by machinery at the point of generation
- General housekeeping around machinery and of working areas
- And/or collection of spills.
For other specific applications a specific assessment shall be performed.
This European Standard does not cover equipment used to collect toxic dusts where there is a
health risk if dust passes through the filter element. This European Standard does not cover either
the collection of dusts which have explosive and unstable properties (UN transport class 1, class
4.1 and class 5.2).
This European Standard covers vacuum cleaners with an internal dust loaded volume of maximum
200 liters
This European Standard does not apply to pumps, where the inlet nozzle is submerged into a
liquid, and all conveying applications.
This European Standard does not apply to Group I vacuum cleaners and dust collectors for mining.
For an easier readability, all types of equipment concerned by this standard are referred as
“Vacuum cleaner” in this document.
NOTE Where undated references are used in the body of the standard the latest edition
applies
Anforderungen an die Konstruktion und Prüfung von Staubsaugern und Staubabscheidern zur Verwendung in explosionsgefährdeten Bereichen
Dieses Dokument legt die Gestaltungs-, Konstruktions-, Prüf- und Kennzeichnungsanforderungen für mobile und transportable Handstaubsauger sowie deren Zubehör fest, die entsprechend Gruppe II, Kategorie 2G oder Kategorie 3G (der Explosionsgruppen IIA, IIB und Wasserstoff) sowie Gruppe II, Kategorie 2D und Kategorie 3D (der Explosionsgruppe IIIA, IIIB und IIIC) konstruiert werden und für die Sammlung von brennbarem oder nicht brennbarem Staub und entzündbaren oder nicht entzündbaren Flüssigkeiten in explosionsgefährdeten Bereichen bestimmt sind. Ein explosionsgefährdeter Bereich könnte während des bestimmungsgemäßen Gebrauchs des Gerätes erzeugt werden.
ANMERKUNG 1 Die Ansammlung von 1 mm oder mehr brennbarem Staub auf Oberflächen in einem Arbeitsbereich kann eine explosionsfähige Atmosphäre erzeugen (siehe Literaturhinweis zu 1/32 in. of Depth of Dust Accumulation for Guidance for Area Electrical Classification in NFPA 654, 2017 Edition).
Dieses Dokument ist anzuwenden für Geräte, die mit elektrischen und mit pneumatischen Antriebssystemen angetrieben werden.
Dieses Dokument enthält Richtlinien für den Umgang mit wesentlichen Gefährdungen, Gefährdungssituationen und/oder Gefährdungssituationen mit Bezug zu Staubsaugern, wenn sie bestimmungsgemäß und unter Bedingungen von durch den Hersteller vernünftigerweise vorhersehbaren Fehlanwendungen verwendet werden.
Typische Anwendungsbereiche für die betroffenen Geräte sind:
— Sammlung von durch Maschinen erzeugten Staub am Ort der Erzeugung;
— allgemeine Reinigung im Bereich um Maschinen und von Arbeitsbereichen; und/oder
— Sammlung von verschütteten Substanzen;
— Reinigung der Geräte bei Wartungsarbeiten; und/oder
— Sammlung von spezifischem Abfall.
Für die Staubaufnahme bei Vorhandensein von brennbaren Flüssigkeiten oder Dämpfen wird eine spezifische Risikobeurteilung durchgeführt, wenn dies Teil der vorgesehenen Einsatzbedingungen des Staubsaugers ist und zusätzliche Vorsichtsmaßnahmen, die über das in diesem Dokument beschriebene Maß hinausgehen, erforderlich sein können.
ANMERKUNG 2 Beim Durchströmen von Staub durch einen Staubsauger entstehen hohe elektrostatische Aufladungen, die in den meisten Situationen eine potenzielle Zündquelle für eine brennbare Gas- oder Dampfatmosphäre darstellen.
Für das Aufsaugen von brennbaren Flüssigkeiten mit geringer Leitfähigkeit wird eine spezifische Risikobeurteilung durchgeführt, wenn dies Teil der vorgesehenen Einsatzbedingungen des Staubsaugers ist und zusätzliche Vorsichtsmaßnahmen, die über das in diesem Dokument beschriebene Maß hinausgehen, erforderlich sein können.
ANMERKUNG 3 Die daraus resultierenden Flüssigkeitsgeschwindigkeiten liegen wahrscheinlich über den Grenzwerten, die erforderlich sind, um die elektrostatische Aufladung nach CLC/TR 60079 32 1:2018 auf einem nicht gefährlichen Niveau zu halten.
Dieses Dokument ist nicht anzuwenden für Geräte zum Sammeln von giftigen Stäuben, durch die ein Gesundheitsrisiko entsteht, wenn der Staub die Filterelemente durchläuft. Dieses Dokument ist auch nicht anzuwenden für die Sammlung von Stäuben, die explosionsfähige und instabile Eigenschaften (UN-Transportklasse 1, -klasse 4.1 und -klasse 5.2) aufweisen.
ANMERKUNG 4 Gefährdungen im Zusammenhang mit der Verwendung von Staubsaugern zur Aufnahme von gefährlichen Stäuben sind Gegenstand anderer Normen.
Dieses Dokument ist anzuwenden für Staubsauger mit einem inneren Schmutzluftvolumen von maximal 250 l.
ANMERKUNG 5 250 l ist das Volumen, ab dem ein Staubsauger als von einem Bediener nicht mehr transportierbar angesehen wird und ab dem ein zusätzlicher Explosionsschutz erforderlich sein kann.
Die vorliegende Ausgabe des Dokuments ist nicht anzuwenden für batteriebetriebene Geräte.
Exigences relatives à la conception et aux essais des aspirateurs et des dépoussiéreurs destinés à être utilisés en atmosphères explosibles
Le présent document spécifie les exigences relatives à la conception, à la construction, aux essais et au marquage des aspirateurs portatifs tenus à la main, mobiles et transportables, y compris leurs accessoires, construits conformément aux catégories 2G et 3G du groupe II (des groupes d’explosion IIA, IIB et IIB plus hydrogène) et aux catégories 2D et 3D du groupe II (des groupes d’explosion IIIA, IIIB et IIIC), destinés à collecter des poussières combustibles ou non combustibles et des liquides inflammables ou ininflammables dans des atmosphères explosibles. Une atmosphère explosible peut être générée par l’équipement pendant son utilisation prévue.
NOTE 1 L’accumulation de 1 mm ou plus de poussières combustibles sur les surfaces dans une zone de travail peut engendrer une atmosphère explosive (voir la référence à 1/32 pouce d’épaisseur de poussière accumulée indiquée comme recommandation pour la classification des surfaces électriques dans la norme NFPA 654, 2017, édition 2017).
Le présent document s’applique aux équipements fonctionnant à l’énergie électrique ou pneumatique.
Le présent document fournit des lignes directrices pour traiter de tous les phénomènes dangereux, situations dangereuses et/ou événements dangereux significatifs applicables aux aspirateurs, lorsqu’ils sont utilisés conformément à l’utilisation prévue et dans des conditions de mauvais usage raisonnablement prévisible par le fabricant.
Les applications types des équipements concernés sont :
- la collecte des poussières produites par des machines au niveau du point où elles sont générées ;
- l’entretien général autour des machines et des zones de travail ;
- la collecte des déversements accidentels ;
- le nettoyage des équipements pendant les opérations de maintenance ;
- la collecte de déchets spécifiques.
Pour la collecte de poussières en présence de liquides ou de vapeurs inflammables, une évaluation des risques spécifique est réalisée si cela fait partie intégrante des conditions d’utilisation prévue des aspirateurs et des précautions supplémentaires peuvent être requises en plus de ce qui est décrit dans le présent document.
NOTE 2 Le passage de poussière dans un aspirateur génère des niveaux importants de charge électrostatique qui, dans la plupart des situations, représentent une source potentielle d’inflammation d’un gaz inflammable ou d’une atmosphère vaporeuse.
Pour la collecte de liquides inflammables à faible conductivité, une évaluation des risques spécifique est réalisée si cela fait partie intégrante des conditions d’utilisation prévue des aspirateurs, et des précautions supplémentaires peuvent être requises en plus de ce qui est décrit dans le présent document.
NOTE 3 Les vitesses de liquide résultantes sont susceptibles d’être supérieures aux limites requises pour maintenir la génération de charge électrostatique à un niveau non dangereux conformément au CLC/TR 60079 32 1:2018.
Le présent document ne s’applique pas aux équipements utilisés pour collecter des poussières toxiques lorsqu’il existe un risque pour la santé si les poussières traversent les éléments filtrants. Le présent document ne s’applique pas à la collecte des poussières ayant des propriétés explosives et instables (classes de transport 1, 4.1 et 5.2 des Nations Unies).
NOTE 4 Les dangers liés à l’utilisation d’aspirateurs pour la collecte de poussières dangereuses font l’objet d’autres normes.
Le présent document s’applique aux aspirateurs ayant un volume interne d’air sale de 250 l maximum.
...
Zahteve za načrtovanje in preskušanje sesalnikov in zbiralnikov prahu za uporabo v potencialno eksplozivnih atmosferah
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 17348:2019
01-april-2019
=DKWHYH]DQDþUWRYDQMHLQSUHVNXãDQMHVHVDOQLNRYLQ]ELUDOQLNRYSUDKX]DXSRUDER
YSRWHQFLDOQRHNVSOR]LYQLKDWPRVIHUDK
Requirements for design and testing of vacuum cleaners and dust collectors for use in
potentially explosive atmospheresAnforderungen an die Konstruktion und Prüfung von Staubsaugern und
Staubabscheidern zur Verwendung in explosionsgefährdeten Bereichen
Exigences relatives à la conception et aux essais des aspirateurs et des dépoussiéreurs
destinés à être utilisés en atmosphères explosiblesTa slovenski standard je istoveten z: prEN 17348
ICS:
97.080 $SDUDWL]DþLãþHQMH Cleaning appliances
oSIST prEN 17348:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 17348:2019
---------------------- Page: 2 ----------------------
oSIST prEN 17348:2019
DRAFT
EUROPEAN STANDARD
prEN 17348
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2019
ICS 97.080
English Version
Requirements for design and testing of vacuum cleaners
and dust collectors for use in potentially explosive
atmospheres
Anforderungen an die Konstruktion und Prüfung von
Staubsaugern und Staubabscheidern zur Verwendung
in explosionsgefährdeten Bereichen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 305.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17348:2019 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 17348:2019
prEN 17348:2019 (E)
Contents Page
European foreword ....................................................................................................................................................... 7
Introduction .................................................................................................................................................................... 8
1 Scope .................................................................................................................................................................... 9
2 Normative references .................................................................................................................................... 9
3 Terms and definitions ................................................................................................................................ 10
4 Safety requirements and protective measures ................................................................................. 16
4.1 General ............................................................................................................................................................. 16
4.2 Ignition hazard and significant hazards assessment ...................................................................... 16
4.3 Assignment of categories .......................................................................................................................... 16
4.4 Assignment of types .................................................................................................................................... 17
4.5 Design codes “E” for vacuum cleaner categories .............................................................................. 17
4.6 Design codes “M” for the vacuum cleaner types................................................................................ 18
5 Safety requirements for all vacuum cleaner categories and types regarding ignition
hazards ............................................................................................................................................................. 19
5.1 Hot surfaces .................................................................................................................................................... 19
5.1.1 General ............................................................................................................................................................. 19
5.1.2 Temperature classification....................................................................................................................... 19
5.2 Naked flame.................................................................................................................................................... 20
5.3 Mechanically generated sparks .............................................................................................................. 20
5.4 Exothermic reactions .................................................................................................................................. 20
5.5 Fans ................................................................................................................................................................... 20
5.6 Electrical components and devices........................................................................................................ 21
5.7 Electrostatic Hazards related to the external parts of the vacuum cleaner ........................... 21
5.7.1 General ............................................................................................................................................................. 21
5.7.2 Earthing ........................................................................................................................................................... 21
5.7.3 Main body of the vacuum cleaner ........................................................................................................... 21
5.7.4 Suction hose, tools and accessories ....................................................................................................... 21
5.7.5 Requirements regarding the use of insulating solid materials ................................................... 22
5.8 General requirements for the internal part of the vacuum-cleaner.......................................... 22
5.8.1 Airflow generating electrostatic charges ............................................................................................ 22
5.8.2 Cloth filter media .......................................................................................................................................... 22
5.8.3 Protection against sparks generated by single impacts ................................................................ 22
5.8.4 Electrical and non-electrical equipment and components ........................................................... 22
6 Safety requirements for all vacuum-cleaner categories and types regardingsignificant hazards ....................................................................................................................................... 23
6.1 Mechanical hazards ..................................................................................................................................... 23
6.2 Noise hazards................................................................................................................................................. 23
6.3 Collapsing due to vacuum ......................................................................................................................... 23
6.4 Vibration hazards......................................................................................................................................... 23
6.5 Material/substance hazards .................................................................................................................... 23
6.5.1 Avoiding dust clouds ................................................................................................................................... 23
6.5.2 Avoid dust accumulation ........................................................................................................................... 24
6.5.3 Prevent spillage ............................................................................................................................................ 24
6.6 Fastening systems ........................................................................................................................................ 24
---------------------- Page: 4 ----------------------oSIST prEN 17348:2019
prEN 17348:2019 (E)
6.7 Compatibility with material being collected ...................................................................................... 24
6.8 Material containment .................................................................................................................................. 24
6.9 Metal oxidation (rust) ................................................................................................................................. 24
6.10 Ergonomic hazards ...................................................................................................................................... 24
7 Additional requirements for electrical vacuum cleaners .............................................................. 24
7.1 General ............................................................................................................................................................. 24
7.2 Detachable supply cords ............................................................................................................................ 24
7.3 Through flow and open enclosure motors .......................................................................................... 25
7.4 Motor temperature control ....................................................................................................................... 25
7.4.1 Thermal protector ........................................................................................................................................ 25
7.4.2 Thermal overload protection ................................................................................................................... 25
7.4.3 Vacuum relief valve...................................................................................................................................... 25
7.5 Materials for rotating and stationary parts of fans .......................................................................... 25
8 Additional requirements for non-electrical vacuum cleaners ..................................................... 25
8.1 General ............................................................................................................................................................. 25
8.2 Material pairing ............................................................................................................................................. 25
9 Additional safety requirements for Dry Type dust collectors ...................................................... 26
9.1 General ............................................................................................................................................................. 26
9.2 Protection against hazards related to collected dusts present in the working air ............... 26
9.3 Protection against collected hot embers or ignited dust ............................................................... 27
9.4 Safety filter ...................................................................................................................................................... 27
10 Additional safety requirements for Wet Type dust collectors ..................................................... 27
10.1 General ............................................................................................................................................................. 27
10.2 Precipitation of the collected dust.......................................................................................................... 27
10.3 Moisture capture ........................................................................................................................................... 27
10.3.1 Electrical vacuum cleaners ....................................................................................................................... 27
10.3.2 Non-electrical vacuum cleaners .............................................................................................................. 28
10.3.3 Absolute coalescing filter........................................................................................................................... 28
10.4 Liquid level indicator .................................................................................................................................. 28
10.5 Creation of a gas explosive atmosphere ............................................................................................... 28
10.6 Degassing vent ............................................................................................................................................... 28
10.7 Vacuum relief vent ....................................................................................................................................... 28
10.8 Additional filtration level inside the collection tank ....................................................................... 28
10.9 Safety filter ...................................................................................................................................................... 29
11 Additional safety requirement for Liquid collectors ....................................................................... 29
11.1 General ............................................................................................................................................................. 29
11.2 Suction cut-off system ................................................................................................................................. 29
11.3 Liquid adapted main filter ......................................................................................................................... 29
11.4 Liquid adapted safety filter ....................................................................................................................... 29
11.5 Creation of a gas explosive atmosphere ............................................................................................... 29
11.6 Degassing vent ............................................................................................................................................... 30
11.7 Vacuum relief vent ....................................................................................................................................... 30
11.8 Accidental spillage ....................................................................................................................................... 30
12 Type verification and test .......................................................................................................................... 30
12.1 Temperature measurement ..................................................................................................................... 30
12.2 Tests for thermal endurance .................................................................................................................... 30
12.2.1 General ............................................................................................................................................................. 30
12.2.2 Thermal endurance to heat....................................................................................................................... 30
12.2.3 Thermal endurance to cold ....................................................................................................................... 30
12.3 Mechanical tests ............................................................................................................................................ 30
---------------------- Page: 5 ----------------------oSIST prEN 17348:2019
prEN 17348:2019 (E)
12.3.1 Resistance to impact ................................................................................................................................... 30
12.3.2 Drop test .......................................................................................................................................................... 31
12.3.3 Stability test ................................................................................................................................................... 31
12.3.4 Assessment of sparks generated by single impacts ......................................................................... 31
12.3.5 Resistance to lowest inlet pressure ....................................................................................................... 31
12.3.6 Burst strength test ....................................................................................................................................... 31
12.4 Electrostatic charges tests ........................................................................................................................ 31
12.4.1 Connection facilities for earthing conducting parts ........................................................................ 31
12.4.2 Electrostatic charges on external non-metallic materials ............................................................ 32
12.4.3 Accessible metal parts ................................................................................................................................ 32
12.5 Type verification and test for filters ..................................................................................................... 32
12.6 Test for motor temperature control systems .................................................................................... 32
12.6.1 Thermal protector attached to the motor ........................................................................................... 32
12.6.2 Thermal overload protection in the control switch ........................................................................ 32
12.6.3 Vacuum relief valve ..................................................................................................................................... 32
12.7 Test for wet type dust collector .............................................................................................................. 32
13 Routine test .................................................................................................................................................... 33
13.1 General ............................................................................................................................................................. 33
13.2 Test of performance .................................................................................................................................... 33
13.3 Test for electrical continuity .................................................................................................................... 34
13.4 Seal and filtration efficiency test ............................................................................................................ 34
14 Marking ............................................................................................................................................................ 34
15 Information for use ..................................................................................................................................... 36
15.1 General ............................................................................................................................................................. 36
15.2 Operation and maintenance manual..................................................................................................... 36
15.3 Technical features ........................................................................................................................................ 36
15.3.1 Seal and filtration efficiency .................................................................................................................... 36
15.3.2 Required input air pressure ..................................................................................................................... 36
15.3.3 Filtration system .......................................................................................................................................... 36
15.4 Intended use and limitations for use .................................................................................................... 36
15.4.1 General ............................................................................................................................................................. 36
15.4.2 Dry type dust collectors ............................................................................................................................. 37
15.4.3 Wet type dust collectors and liquid collectors .................................................................................. 37
15.4.4 Maximum surface temperatures ............................................................................................................ 37
15.4.5 Other considerations regrading limitations for use ........................................................................ 37
15.5 Routine inspections, service and cleaning .......................................................................................... 37
15.6 Additional instructions for safe use ...................................................................................................... 39
Annex A (informative) Methodological approach ......................................................................................... 41
Annex B (informative) Location of the power system in vacuum cleaners .......................................... 42
Annex C (informative) Examples of vacuum-cleaner types ....................................................................... 45
Annex D (normative) Vacuum cleaners assembled with a through flow motor or an open
enclosure bypass motor ............................................................................................................................. 49
D.1 General ............................................................................................................................................................. 49
D.2 Safety requirements .................................................................................................................................... 49
D.2.1 Required safety elements for Category 3D vacuum cleaners....................................................... 49
D.2.1.1 General ............................................................................................................................................................. 49
D.2.1.2 Protection against hazards related to air exhaust openings of the vacuum-cleaner .......... 50
---------------------- Page: 6 ----------------------oSIST prEN 17348:2019
prEN 17348:2019 (E)
D.2.1.3 Protection against hazards related to cooling air intake for vacuum-cleaner using
bypass motors with an open enclosure ................................................................................................ 50
D.2.1.4 Protection against hazards related to cooling air exhaust for vacuum-cleaner using
bypass motors with an open enclosure ................................................................................................ 50
D.2.1.5 Protection against hazards related to working air exhaust .......................................................... 51
D.2.2 Required safety elements based on the collected material (“M”) ............................................... 51
D.2.2.1 General ............................................................................................................................................................. 51
D.2.2.2 Protection against hazards related to presence of combustible dust in working air
upstream of the power system ................................................................................................................ 52
D.2.2.3 Moisture capture ........................................................................................................................................... 52
D.2.3 Tests .................................................................................................................................................................. 52
D.2.3.1 General ............................................................................................................................................................. 52
D.2.3.2 Joints .................................................................................................................................................................. 52
D.2.3.3 Type tests for dust exclusion by enclosures ....................................................................................... 53
D.2.4 Marking and information of use .............................................................................................................. 53
D.2.5 Examples of vacuum cleaners providing an Ex “t” casing .............................................................. 53
Annex E (normative) Ignition Hazards Assessment ...................................................................................... 55
Annex F (normative) List of significant hazards ............................................................................................. 83
Annex G (normative) Seal and filtration efficiency test ............................................................................... 87
G.1 General ............................................................................................................................................................. 87
G.2 Test aerosol .................................................................................................................................................... 87
G.2.1 Monodisperse aerosol ................................................................................................................................. 87
G.2.2 Polydisperse aerosol ................................................................................................................................... 87
G.3 Aerosol generator ......................................................................................................................................... 87
G.3.1 Monodisperse aerosol ................................................................................................................................. 87
G.3.2 Polydisperse aerosol ................................................................................................................................... 87
G.4 Particle counter ............................................................................................................................................. 87
G.5 Test conditions .............................................................................................................................................. 88
G.6 Test procedure .............................................................................................................................................. 88
G.6.1 Preparatory checks ...................................................................................................................................... 88
G.6.2 Starting up the aerosol generator........................................................................................................... 88
G.6.3 Test execution ................................................................................................................................................ 88
G.6.4 Test for filtration efficiency ...................
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.