Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance

This document is applicable for measurements of the performance of mains-operated dry vacuum cleaners, including water filter vacuum cleaners, for commercial use. The requirements for the construction and testing covered by this document are applied in addition to the requirements for commercial vacuum cleaners in IEC 60335-2-69. The purpose of this document is to specify essential performance characteristics of dry vacuum cleaners for commercial use that are of interest to operators and to describe methods for measuring these characteristics.

Geräte zur Oberflächenreinigung - Teil 8: Trockensauger für den gewerblichen Gebrauch - Verfahren zur Messung der Gebrauchseigenschaften

Appareils de nettoyage des sols - Partie 8: Aspirateurs à sec à usage commercial - Méthodes de mesure de l'aptitude à la fonction

L'IEC 62885-8:2019 s’applique aux mesures de l'aptitude à la fonction des aspirateurs à sec qui fonctionnent sur le réseau, y compris les aspirateurs à filtre à eau, à usage commercial. Les exigences relatives à la construction et aux essais couvertes par le présent document sont appliquées en complément des exigences applicables aux aspirateurs à usage commercial de l'IEC 60335-2-69.
Le présent document a pour objet de spécifier les caractéristiques essentielles d'aptitude à la fonction des aspirateurs à sec à usage commercial présentant un intérêt pour les opérateurs et de décrire des méthodes de mesure de ces caractéristiques.
En raison de l'influence des conditions environnementales, des variations dans le temps, de l'origine des matériaux d'essai et de l'aptitude de l'opérateur, certaines des méthodes d'essai décrites offrent des résultats plus fiables si elles sont appliquées lors d'essais comparatifs d'un certain nombre d'appareils à la fois, dans le même laboratoire et par le même opérateur.
Les méthodes citées ici peuvent être appliquées avec des modifications pour des types de produits ou des technologies de nettoyage des sols qui ne sont actuellement pas couverts par le domaine d'application.
Pour les exigences de sécurité, il est fait référence aux normes IEC 60335-1 et IEC 60335 2 69.
Cette première édition annule et remplace l'IEC PAS 62611, parue en 2009.

Naprave za površinsko čiščenje - 8. del: Sesalniki za suho sesanje za komercialno uporabo - Metode za merjenje učinkovitosti

Ta dokument se uporablja za merjenje učinkovitosti električnih sesalnikov za suho sesanje za komercialno uporabo, vključno s sesalniki z vodnim filtrom. Zahteve za konstrukcijo in preskušanje, ki jih zajema ta dokument, se uporabljajo poleg zahtev za komercialne sesalnike iz standarda IEC 60335-2-69. Namen tega dokumenta je določiti glavne lastnosti delovanja sesalnikov za suho sesanje za komercialno uporabo, ki zanimajo upravljavce, ter opisati metode za merjenje teh lastnosti.

General Information

Status
Published
Publication Date
19-Nov-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Nov-2019
Due Date
17-Jan-2020
Completion Date
20-Nov-2019

Buy Standard

Standard
EN IEC 62885-8:2019
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62885-8:2019
01-december-2019
Naprave za površinsko čiščenje - 8. del: Sesalniki za suho sesanje za komercialno
uporabo - Metode za merjenje učinkovitosti
Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use -
Methods for measuring the performance
Ta slovenski standard je istoveten z: EN IEC 62885-8:2019
ICS:
97.080 Aparati za čiščenje Cleaning appliances
SIST EN IEC 62885-8:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62885-8:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 62885-8:2019


EUROPEAN STANDARD EN IEC 62885-8

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2019
ICS 97.080

English Version
Surface cleaning appliances - Part 8: Dry vacuum cleaners for
commercial use - Methods for measuring the performance
(IEC 62885-8:2019)
Appareils de nettoyage des sols - Partie 8: Aspirateurs à Geräte zur Oberflächenreinigung - Teil 8: Trockensauger für
sec à usage commercial - Méthodes de mesure de den gewerblichen Gebrauch - Prüfverfahren zur
l'aptitude à la fonction Bestimmung der Gebrauchseigenschaften
(IEC 62885-8:2019) (IEC 62885-8:2019)
This European Standard was approved by CENELEC on 2019-09-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62885-8:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62885-8:2019
EN IEC 62885-8:2019 (E)
European foreword
The text of document 59F/368/CDV, future edition 1 of IEC 62885-8, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62885-8:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-26
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62885-8:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60335-1 NOTE Harmonized as EN 60335-1


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62885-8:2019
EN IEC 62885-8:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
This clause of EN 62885-2 is applicable with the following modifications: Delete the references IEC
60704-1 and IEC 60704-2-1 and replace by the following reference:
Publication Year Title EN/HD Year
IEC 60335-2-69 -  Household and similar electrical - -
appliances - Safety - Part 2-69:
Particular requirements for wet and dry
vacuum cleaners, including power
brush, for commercial use

Insert, after the entry for IEC TS 62885-1, the following reference:
Publication Year Title EN/HD Year
IEC 62885-2 2016 Surface cleaning appliances - Part 2: - -
Dry vacuum cleaners for household or
similar use - Methods for measuring the
performance

3

---------------------- Page: 5 ----------------------
SIST EN IEC 62885-8:2019

---------------------- Page: 6 ----------------------
SIST EN IEC 62885-8:2019




IEC 62885-8

®


Edition 1.0 2019-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Surface cleaning appliances –

Part 8: Dry vacuum cleaners for commercial use – Methods for measuring the

performance




Appareils de nettoyage des sols –

Partie 8: Aspirateurs à sec à usage commercial – Méthodes de mesure de


l'aptitude à la fonction













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 97.080 ISBN 978-2-8322-7294-70




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 62885-8:2019
– 2 – IEC 62885-8:2019  IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General conditions for testing . 6
4.6 Operation of the dry vacuum cleaner . 6
4.6.1 General . 6
5 Dry vacuum cleaning tests . 7
5.3 Dust removal from carpets . 7
5.3.1 Test carpet . 7
5.101 Debris removal from hard floor . 7
5.101.1 Test equipment . 7
5.101.2 Test area and stroke length . 7
5.101.3 Distribution of test debris . 8
5.101.4 Determination of debris removal ability . 9
6 Miscellaneous tests . 10
6.15 Airborne acoustical noise . 10
6.18 Rated input power . 10
7 Test material and equipment . 10
7.3 Equipment for tests . 10
7.3.101 Test plate without crevice for debris pick up . 10
Bibliography . 11

Figure 101 – Debris distribution and distances . 9

---------------------- Page: 8 ----------------------
SIST EN IEC 62885-8:2019
IEC 62885-8:2019  IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SURFACE CLEANING APPLIANCES –

Part 8: Dry vacuum cleaners for commercial use –
Methods for measuring the performance

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62885-8 has been prepared by subcommittee 59F: Surface
cleaning appliances, of IEC technical committee 59: Performance of household and similar
electrical appliances.
This first edition cancels and replaces IEC PAS 62611, published in 2009.
This International Standard is to be used in conjunction with IEC 62885-2:2016. This
document supplements and modifies the requirements of IEC 62885-2:2016. When a
particular clause/subclause of IEC 62885-2:2016 is not mentioned in this document, that
clause/subclause applies. Whenever a requirement of this document is in conflict with a
requirement of IEC 62885-2.2016, the requirement of this document will take precedence.
Additional specific provisions to those in IEC 62885-2:2016, given as individual clauses or
subclauses, are numbered starting from 101.

---------------------- Page: 9 ----------------------
SIST EN IEC 62885-8:2019
– 4 – IEC 62885-8:2019  IEC 2019
The text of this International Standard is based on the following documents:
CDV Report on voting
59F/368/CDV 59F/378A/RVC

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 62885 series, under the general title Surface cleaning
appliances, can be found on the IEC website.
In this standard, the following print types are used:
– terms defined in Clause 3: bold type.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.