SIST EN IEC 60704-2-17:2021
(Main)Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry cleaning robots
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry cleaning robots
IEC 60704-2-17:2020 describes the determination of the noise emission of dry-cleaning robots under normal operating conditions on carpet and hard floors.
This document applies to electrical dry-cleaning robots (including their accessories and their component parts) for household use or under conditions similar to those in households.
This document applies to electrical dry-cleaning robots operating in dry conditions only. Some additions and modifications for dry-cleaning robots operating in wet conditions are under consideration.
This document does not apply to dry-cleaning robots for industrial or professional purposes.
This document does not apply to
– manually operated vacuum cleaners, and
– dry-cleaning robots for outdoor use.
This Part 2-17 is intended to be used in conjunction with IEC 60704-1:2010. The relevant text of IEC 60704-1:2010 as amended by this publication establishes the test code for dry-cleaning robots.
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die Bestimmung der Luftschallemission - Teil 2-17: Besondere Anforderungen an Trocken-Reinigungsroboter
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit aérien - Partie 2-17: Exigences particulières pour les robots de nettoyage à sec
L'IEC 60704-2-17:2020 décrit le code d'essai pour la détermination du bruit aérien des robots de nettoyage à sec électriques destinés à un usage domestique ou dans des conditions analogues à celles des foyers domestiques.
Cette partie de l'IEC 60704-2 s'applique aux robots de nettoyage à sec électriques fonctionnant sur sol sec uniquement.
Des additions et modifications sont à l'étude pour les robots de nettoyage à sec fonctionnant sur sol humide.
Cette partie de l'IEC 60704-2 ne s'applique pas aux robots de nettoyage à sec destinés à des usages industriels ou professionnels.
Le présent document ne s'applique pas:
– aux aspirateurs à commande manuelle; ni
– aux robots de nettoyage à sec pour une utilisation en extérieur.
La présente Partie 2-17 est destinée à être utilisée conjointement avec l'IEC 60704-1:2010. Le texte correspondant de l'IEC 60704-1:2010 modifié par la présente publication établit le code d'essai pour les robots de nettoyage à sec.
Gospodinjski in podobni električni aparati - Postopek preskušanja za ugotavljanje zvočnega hrupa v zraku - 2-17. del: Posebne zahteve za robotske sesalnike
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60704-2-17:2021
01-februar-2021
Gospodinjski in podobni električni aparati - Postopek preskušanja za ugotavljanje
zvočnega hrupa v zraku - 2-17. del: Posebne zahteve za robotske sesalnike
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-17: Particular requirements for dry cleaning robots
Ta slovenski standard je istoveten z: EN IEC 60704-2-17:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
97.080 Aparati za čiščenje Cleaning appliances
SIST EN IEC 60704-2-17:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60704-2-17:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60704-2-17:2021
EUROPEAN STANDARD EN IEC 60704-2-17
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 17.140.20
English Version
Household and similar electrical appliances - Test code for the
determination of airborne acoustical noise - Part 2-17: Particular
requirements for dry-cleaning robots
(IEC 60704-2-17:2020)
Appareils électrodomestiques et analogues - Code d'essai Elektrische Geräte für den Hausgebrauch und ähnliche
pour la détermination du bruit aérien - Partie 2-17: Zwecke - Prüfvorschrift für die Bestimmung der
Exigences particulières pour les robots de nettoyage à sec Luftschallemission - Teil 2-17: Besondere Anforderungen
(IEC 60704-2-17:2020) an Trocken-Reinigungsroboter
(IEC 60704-2-17:2020)
This European Standard was approved by CENELEC on 2020-12-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60704-2-17:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60704-2-17:2021
EN IEC 60704-2-17:2020 (E)
European foreword
The text of document 59F/395/FDIS, future edition 1 of IEC 60704-2-17, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60704-2-
17:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-12-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 60704-2-17:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60704-2-1 NOTE Harmonized as EN 60704-2-1
1
IEC/ASTM 62885-7 NOTE Harmonized as EN IEC/ASTM 62885-7
1
To be published.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60704-2-17:2021
EN IEC 60704-2-17:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZA of EN IEC 60704-1:2010 is applicable except as follows:
Add the following references:
Publication Year Title EN/HD Year
IEC 60704-1 2010 Household and similar electrical appliances EN 60704-1 2010
- Test code for the determination of airborne
acoustical noise - Part 1: General
requirements
- - + A11 2012
IEC/TS 62885-1 - Surface cleaning appliances - Part 1: - -
General requirements on test material and
test equipment
Replace with the following references:
Publication Year Title EN/HD Year
ISO 3743-2 2018 Acoustics - Determination of sound power EN ISO 3743-2 2019
levels of noise sources using sound
pressure - Engineering methods for small,
movable sources in reverberant fields - Part
2: Methods for special reverberation test
rooms
ISO 3744 2010 Acoustics - Determination of sound power EN ISO 3744 2010
levels and sound energy levels of noise
sources using sound pressure - Engineering
methods for an essentially free field over a
reflecting plane
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60704-2-17:2021
---------------------- Page: 6 ----------------------
SIST EN IEC 60704-2-17:2021
IEC 60704-2-17
®
Edition 1.0 2020-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Test code for the determination
of airborne acoustical noise –
Part 2-17: Particular requirements for dry-cleaning robots
Appareils électrodomestiques et analogues – Code d'essai pour
la détermination du bruit aérien –
Partie 2-17: Exigences particulières pour les robots de nettoyage à sec
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.140.20 ISBN 978-2-8322-8479-7
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60704-2-17:2021
– 2 – IEC 60704-2-17:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 7
3 Terms and definitions . 8
4 Measurement methods and acoustical environments . 8
5 Instrumentation . 9
6 Operation and location of appliances under test . 9
7 Measurement of sound pressure levels . 12
8 Calculation of sound pressure and sound power levels . 13
9 Information to be recorded . 14
10 Information to be reported . 14
Annex A (normative) Standard test table . 15
Annex B (normative) Test enclosure . 15
Annex AA (normative) Fenced area . 16
Bibliography . 17
Figure AA.1 – Example of fence . 16
Table 101 – Standard deviations of sound power levels . 7
Table 102 – Standard deviations for declaration and verification . 7
---------------------- Page: 8 ----------------------
SIST EN IEC 60704-2-17:2021
IEC 60704-2-17:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
TEST CODE FOR THE DETERMINATION
OF AIRBORNE ACOUSTICAL NOISE –
Part 2-17: Particular requirements for dry-cleaning robots
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60704-2-17 has been prepared by subcommittee 59F: Surface
cleaning appliances of IEC technical committee 59: Performance of household and similar
electrical appliances.
The text of this International Standard is based on the following documents:
FDIS Report on voting
59F/395/FDIS 59F/400/RVD
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 9 ----------------------
SIST EN IEC 60704-2-17:2021
– 4 – IEC 60704-2-17:2020 © IEC 2020
This Part 2-17 is intended to be used in conjunction with the third edition (2010) of
IEC 60704-1, Household and similar electrical appliances – Test code for the determination of
airborne acoustical noise – Part 1: General requirements.
The relevant text of IEC 60704-1:2010 as amended by this publication establishes the test code
for dry-cleaning robots.
This Part 2-17 supplements or modifies the corresponding clauses in IEC 60704-1:2010. When
a particular subclause of IEC 60704-1:2010 is not mentioned in this Part 2-17, that subclause
is applicable as far as reasonable. Where this standard states "addition", "modification" or
"replacement", the relevant requirements, test specifications or explanatory matter in
IEC 60704-1:2010 should be adapted accordingly.
Subclauses and tables that are additional to those in IEC 60704-1:2010 are numbered starting
from 101.
Unless notes are in a new subclause or involve notes in IEC 60704-1:2010, they are numbered
starting from 101, including those in a replaced clause or subclause.
In this document, the following print types are used:
• terms defined in Clause 3: Arial bold.
A list of all the parts in the IEC 60704 series, published under the general title Household and
similar electrical appliances – Test code for the determination of airborne acoustical noise, can
be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
---------------------- Page: 10 ----------------------
SIST EN IEC 60704-2-17:2021
IEC 60704-2-17:2020 © IEC 2020 – 5 –
INTRODUCTION
The measuring conditions specified in this Part 2-17 provide for sufficient accuracy in
determining the noise emitted and comparing the results of measurements taken by different
laboratories, whilst simulating as far as possible the practical use of dry-cleaning robots.
It is recommended to consider the determination of noise levels as part of a comprehensive
testing procedure covering many aspects of the properties and performance of dry-cleaning
robots.
NOTE As stated in the introduction to IEC 60704-1:2010, this test code is concerned with airborne noise only.
---------------------- Page: 11 ----------------------
SIST EN IEC 60704-2-17:2021
– 6 – IEC 60704-2-17:2020 © IEC 2020
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
TEST CODE FOR THE DETERMINATION
OF AIRBORNE ACOUSTICAL NOISE –
Part 2-17: Particular requirements for dry-cleaning robots
1 Scope and object
This clause of IEC 60704-1:2010 is applicable except as follows:
1.1 Scope
1.1.1 General
Replacement:
These particular requirements apply to electrical dry-cleaning robots (including their
accessories and their component parts) for household use or under conditions similar to those
in households. This part of IEC 60704-2 applies to electrical dry-cleaning robots operating in
dry conditions only.
NOTE Some additions and modifications for dry-cleaning robots operating in wet conditions are under consideration.
This part of IEC 60704-2 does not apply to dry-cleaning robots for industrial or professional
purposes.
This document does not apply to
– manually operated vacuum cleaners, and
– dry-cleaning robots for outdoor use.
1.1.2 Types of noise
Replacement:
The methods specified in ISO 3743-2 and ISO 3744 can be used for measuring noise emitted
by electric dry-cleaning robots.
1.1.3 Size of the source
Replacement:
The method specified in ISO 3744 is applicable to noise sources of any size. Limitations for the
size of the source are given in Clause 5 of ISO 3743-2:2018. Alth
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.