iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13523-2:2002

(Main)

Coil coated metals - Test methods - Part 2: Specular gloss

Coil coated metals - Test methods - Part 2: Specular gloss

This part of EN 13523 describes the procedure for determining the specular glossof an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product.

Bandbeschichtete Metalle - Prüfverfahren - Teil 2: Glanz

Dieser Teil von EN beschreibt das Verfahren zum Bestimmen des Reflektometerwertes einer organischen Beschichtung auf einem metallischen Substrat. Der Glanz ist eine Kenngröße von grundsätzlicher Bedeutung für das Aussehen eines bandbeschichteten Produktes. Das Gerät erfordert eine ebene Probe, die größer ist als die Meßöffnung. Unebene Proben können folglich nicht gemessen werden. Das Verfahren ist nur auf alle pigmentierten und nichtpigmentierten Beschichtungen, einschließlich Beschichtungen mit Metalleffekt oder Perlglanzeffekt anwendbar. Für strukturierte Beschichtungen gibt es nur Anhaltswerte.

Tôles prélaquées - Méthodes d'essai - Partie 2: Brillant spéculaire

La présente partie de l'EN décrit la méthode de détermination du brillant spéculaire d'un revetement organique sur un support métallique. Le brillant est une caractéristique qui a une importance fondamentale pour l'aspect du produit prélaqué. L'appareillage requiert une éprouvette plate de taille supérieure a l'ouverture; par conséquent, les surfaces irrégulieres ne peuvent pas etre mesurées. Cette méthode s'applique a tous les revetements, pigmentés ou non, y compris aux revetements métalliques/nacrés. Cependant, pour les revetements texturés elle est seulement indicative.

Kovine, zaščitene po postopku coil-coating - Metode preskušanja - 2. del: Sijaj

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
29-Jun-2014
ICS
17.180.20 - Colours and measurement of light
25.220.60 - Organic coatings
Technical Committee
IBLP - Paints and varnishes
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Jun-2014
Due Date
12-Jul-2014
Completion Date
30-Jun-2014
Ref Project
EN 13523-2:2001 - Coil coated metals - Test methods - Part 2: Specular gloss

Relations

Replaced By
SIST EN 13523-2:2014 - Coil coated metals - Test methods - Part 2: Gloss
Effective Date
08-Jun-2022
Replaced By
SIST EN 13523-2:2014 - Coil coated metals - Test methods - Part 2: Gloss
Effective Date
01-Sep-2014

Buy Standard

EN 13523-2:2002EN 13523-2:2002
PreviousNext
Standard
EN 13523-2:2002
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 2: GlanzTôles prélaquées - Méthodes d'essai - Partie 2: Brillant spéculaireCoil coated metals - Test methods - Part 2: Specular gloss25.220.60Organske prevlekeOrganic co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13523-3:2021(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN 13523-3:2021

This part of EN 13523 specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate.
Establishing a standard as well as the magnitude of an acceptable colour difference are not covered by this method.
Two appropriate methods are given in this part of EN 13523:
a)   instrumental colour difference measurement using a tristimulus colorimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
Care shall be taken when measuring e.g.
-   textured surfaces;
-   fluorescent coatings;
-   metameric coatings;
-   multi-coloured, pearlescent, metallic or special colour effect coatings.
In order to determine whether metamerism is present, the metamerism index is determined (see EN 13523-15) and/or a visual examination (see EN 13523-22) is performed with different artificial light sources.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-10:2017(Main)
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN 13523-10:2017

This part of EN 13523 specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions.
Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected.
Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-22:2017(Main)
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-22:2017

This part of EN 13523 specifies the procedure for determining the difference in the colour of an organic coating on a metallic substrate by visual comparison against a standard using either diffuse natural daylight or artificial daylight in a standard booth.
NOTE 1   Results might differ between natural and artificial daylight.
It might be that two colour specimens will match in daylight but not under another light source. This phenomenon is known as metamerism (see EN 13523-15).
NOTE 2   If metameric match is to be reported in objective terms, spectrophotometric measurements (using CIE Standard Illuminants D65 and A) should be made, in accordance with EN 13523-15.
No statement is made about either the precision or the accuracy of this procedure since the results derived are neither in numerical form nor do they provide a pass/fail evaluation in objective terms. Therefore, this procedure should only be used where the use of colour measuring instruments is not recommendable (evaluation of colour matches, inspection of metallic colours, etc.).
The standardization of such visual comparisons, by light sources, illuminating and viewing geometry and specimen size, provides for improved uniformity of results. This practice is essential for critical colour matching and is highly recommended for colour inspections.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13523-3:2023(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
prEN 13523-3

This document specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate compared to another one used as a reference (usually called reference) and the metamerism depending on the illuminant.
When two colour specimens have identical spectral reflectance curves, they are matching under any illuminant irrespective of its spectral characteristics. This is termed a “spectral match”. It is also possible for two colour specimens having different spectral reflectance curves to match visually under a given light source but not to match under another light source with different spectral characteristics; such matches are termed “metameric”.
One quantitative description of metamerism is the so-called “metamerism index”.
Information on the metamerism index is of limited value where ΔE (instrumental colour difference for a given illuminant) is > 0,5. The metamerism index is not suited for determining the absolute colour difference or colour consistency of a given specimen at change of illuminant.
The colour difference under the reference illuminant is to be measured in colour coordinates L*, a* and b*.
Excluded from this method are organic coatings producing fluorescence and/or which are multicoloured, pearlescent or metallic.
Establishing a reference as well as the magnitude of an acceptable colour difference are not covered by this method.
Two methods are given in this document:
a)   instrumental colour difference measurement using a tristimulus colourimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
It is advised that care is taken when measuring e.g.
—   textured surfaces;
—   fluorescent coatings;
—   metameric coatings;
—   multi-coloured, pearlescent, metallic or special colour effect coatings.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13523-22:2023(Main)
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
prEN 13523-22

This part of the EN 13523 series specifies the procedure for determining the difference in the colour of an organic coating on a metallic substrate by visual comparison against a standard using either diffuse natural daylight or artificial daylight in a standard booth.
NOTE   Results might differ between natural and artificial daylight.
It might be that two colour specimens will match in daylight but not under another light source. This phenomenon is known as metamerism (see EN 13523 15).
If a metameric match is to be reported in objective terms, spectrophotometric measurements (using CIE Standard Illuminants D65 and A) should be made, in accordance with EN 13523-15.
No statement is made about either the precision or the accuracy of this procedure since the results derived are neither in numerical form nor do they provide a pass/fail evaluation in objective terms. Therefore, this procedure should only be used where the use of colour measuring instruments is not recommendable (evaluation of colour matches, inspection of metallic colours, etc.).
The standardization of such visual comparisons, by light sources, illuminating and viewing geometry and specimen size, provides for improved uniformity of results. This practice is essential for critical colour matching and is highly recommended for colour inspections.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13523-10:2023(Main)
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
prEN 13523-10

This part of the EN 13523 series specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions.
Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected.
Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13523-23:2022(Main)
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
EN 13523-23:2023

This Part of EN 13523 describes the procedure for determining the colour stability of an organic coating on a metallic substrate when exposed to humid atmospheres containing sulfur dioxide. This method has been designed to provide an accelerated test for evaluating the colour fastness of coil coated products in atmospheres containing sulfur dioxide (typical of industrial atmospheres).

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-3:2021(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN 13523-3:2021

This part of EN 13523 specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate.
Establishing a standard as well as the magnitude of an acceptable colour difference are not covered by this method.
Two appropriate methods are given in this part of EN 13523:
a)   instrumental colour difference measurement using a tristimulus colorimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
Care shall be taken when measuring e.g.
-   textured surfaces;
-   fluorescent coatings;
-   metameric coatings;
-   multi-coloured, pearlescent, metallic or special colour effect coatings.
In order to determine whether metamerism is present, the metamerism index is determined (see EN 13523-15) and/or a visual examination (see EN 13523-22) is performed with different artificial light sources.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-22:2017(Main)
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-22:2017

This part of EN 13523 specifies the procedure for determining the difference in the colour of an organic coating on a metallic substrate by visual comparison against a standard using either diffuse natural daylight or artificial daylight in a standard booth.
NOTE 1   Results might differ between natural and artificial daylight.
It might be that two colour specimens will match in daylight but not under another light source. This phenomenon is known as metamerism (see EN 13523-15).
NOTE 2   If metameric match is to be reported in objective terms, spectrophotometric measurements (using CIE Standard Illuminants D65 and A) should be made, in accordance with EN 13523-15.
No statement is made about either the precision or the accuracy of this procedure since the results derived are neither in numerical form nor do they provide a pass/fail evaluation in objective terms. Therefore, this procedure should only be used where the use of colour measuring instruments is not recommendable (evaluation of colour matches, inspection of metallic colours, etc.).
The standardization of such visual comparisons, by light sources, illuminating and viewing geometry and specimen size, provides for improved uniformity of results. This practice is essential for critical colour matching and is highly recommended for colour inspections.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-10:2017(Main)
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN 13523-10:2017

This part of EN 13523 specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions.
Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected.
Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day