SIST EN ISO 19953:2004

Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)

This European Standard specifies a test method for determining the impact strength of the heels of ladies' shoes. The result provides an assessment of the liability to failure under the occasional heavy blows received during wear.
NOTE   While the test method is applicable to all types of high heels, of whatever construction, it is particularly useful for injection-moulded plastics heels which incorporate a steel dowel reinforcement, giving information on the suitability of the dowels' hardness or softness. Heels which by virtue of their shape have a high lateral impact resistance do not normally required to be tested in this way.

Schuhe - Prüfverfahren für Absätze - Widerstand gegen seitlichen Schlag (ISO 19953:2004)

Dieser Europäische Norm legt ein Prüfverfahren zur Bestimmung der Stoßfestigkeit von Absätzen von Damen-schuhen fest. Das Ergebnis dient zur Beurteilung der Ausfallneigung bei gelegentlichen starken Stößen während des Tragens.
ANMERKUNG   Obwohl das Prüfverfahren auf alle Arten von hohen Absätzen jeglicher Konstruktion anwendbar ist, ist es insbesondere vorteilhaft für Spritzguss-Kunststoffabsätze mit Stahldübelverstärkung, weil es Angaben zur Eignung der Härte oder Weichheit des Dübels liefert. Absätze, die auf Grund ihrer Form eine hohe Festigkeit gegenüber seitlichem Schlag besitzen, werden gewöhnlich nicht auf diese Weise geprüft.

Chaussures - Méthodes d'essai relatives aux talons - Résistance aux chocs latéraux (ISO 19953:2004)

L'ISO 19953:2004 spécifie une méthode d'essai pour déterminer la résistance aux chocs des talons de chaussures pour femmes.
Les résultats fournissent une évaluation de la possibilité de rupture aux chocs importants reçus occasionnellement durant le porté.
La méthode d'essai est applicable à tous les types de talons hauts, quelle que soit leur construction, mais elle est particulièrement utile pour les talons en plastique moulés par injection, qui incorporent un goujon de renfort en acier, en donnant des informations sur le caractère approprié de la dureté ou de la souplesse des goujons. Il n'est normalement pas nécessaire de soumettre à cet essai les talons dont la forme est telle qu'ils ont une résistance élevée aux chocs latéraux.

Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)

General Information

• Status: Published
• Publication Date: 30-Sep-2004
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2004
• Due Date: 01-Oct-2004
• Completion Date: 01-Oct-2004
• Ref Project: EN ISO 19953:2004 - Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19953:2004
01-oktober-2004
Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)
Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)
Schuhe - Prüfverfahren für Absätze - Widerstand gegen seitlichen Schlag (ISO
19953:2004)
Chaussures - Méthodes d'essai relatives aux talons - Résistance aux chocs latéraux
(ISO 19953:2004)
Ta slovenski standard je istoveten z: EN ISO 19953:2004
ICS:
61.060 Obuvala Footwear
SIST EN ISO 19953:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19953:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 19953:2004
EUROPEAN STANDARD
EN ISO 19953
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 61.060

English version
Footwear - Test methods for heels - Resistance to lateral impact
(ISO 19953:2004)
Chaussures - Méthodes d'essai relatives aux talons - Schuhe - Prüfverfahren für Absätze - Widerstand gegen
Résistance aux chocs latéraux (ISO 19953:2004) seitlichen Schlag (ISO 19953:2004)
This European Standard was approved by CEN on 10 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19953:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19953:2004
EN ISO 19953:2004 (E)


Contents
page
Foreword.3
1 Scope.4
2 Apparatus and material.4
2.1 General.4
2.2 Lateral impact tester.4
2.3 Metal mounting trays.6
2.4 Metal alloy.6
3 Sampling and conditioning.6
4 Test method.6
4.1 Principle.6
4.2 Procedure.7
5 Expression of results.7
6 Test report.7


2

---------------------- Page: 4 ----------------------

SIST EN ISO 19953:2004
EN ISO 19953:2004 (E)
Foreword

This document (EN ISO 19953:2004) has been prepared by Technical Committee CEN /TC 309, "Footwear", the
secretariat of which is held by AENOR, in collaboration with ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest
by January 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 19953:2004
EN ISO 19953:2004 (E)
1 Scope
This European Standard specifies a test method for determining the impact strength of the heels of ladies’ shoes.
The result provides an assessment of the liability to failure under the occasional heavy blows received during wear.
NOTE While the test method is applicable to all types of high heels, of whatever construction, it is particularly useful for
injection-moulded pl
...