SIST EN 61249-4-16:2010

Materials for printed boards and other interconnecting structures -- Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly

This part of IEC 61249 gives requirements for properties of prepreg that are mainly intended to be used as bonding sheets in connection with laminates according IEC 61249-2-37 when manufacturing multilayer boards according to IEC 62326-4. Multilayer boards comprised of these materials are suitable for lead-free assembly processes. This material may also be used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test). The flammability rating on fully cured prepreg is achieved through the use of non-halogenated flame retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier's instructions, the glass transition temperature is defined to be 150 °C and 200 °C.

Materialien für Leiterplatten und andere Verbindungsstrukturen – Teil 4-16: Rahmenspezifikationen für unkaschierte Prepreg-Materialien (zur Herstellung von Mehrlagenleiterplatten) - Mit E-Glasgewebe verstärkte Prepregs auf der Basis von multifunktionalem halogenfreiem Epoxidharz mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage) für bleifreie Bestückungstechnik

Matériaux pour circuits imprimés et autres structures d'interconnexion -- Partie 4-16: Série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués (pour la fabrication des cartes multicouches) - Tissu de verre époxyde préimprégné multifonctionnel non halogéné de type E d'inflammabilité définie (essai de combustion verticale) destiné aux assemblages sans plomb

La CEI 61249-4-16:2009 fournit des exigences concernant les propriétés des préimprégnés principalement prévus pour être utilisés en tant que feuilles de collage en relation avec des stratifiés selon la CEI 61249-2-37 durant la fabrication des cartes multicouches selon la CEI 62326-4. Les cartes multicouches constituées de ces matériaux conviennent pour des processus d'assemblage sans plomb. Ce matériau peut également être utilisé pour coller d'autres types de stratifiés. Un préimprégné, selon la présente norme, est d'une inflammabilité définie (essai de combustion verticale). L'inflammabilité nominale d'un préimprégné entièrement traité est obtenue en utilisant des retardateurs de flamme non halogénés faisant partie intégrante de la structure polymère. Après traitement du préimprégné selon les instructions du fabricant, la température de transition vitreuse est définie comme étant de 150 °C et 200 °C.

Materiali za tiskane plošče in druge povezovalne strukture - 4-16. del: Posamezne zahteve za prepreg materiale brez bakrene folije (za izdelavo večplastnih plošč) - S stekleno tkanino ojačen prepreg definirane gorljivosti (navpični preskus gorljivosti), obdelan z modificirano nehalogenirano epoksidno smolo, za montažo brez svinca (IEC 61249-4-16:2009)

Ta del IEC 61249 podaja zahteve za lastnosti preprega, ki so v glavnem namenjene temu, da se uporabljajo kot vezne plošče v povezavi z laminati, v skladu z IEC 61249-2-37, pri proizvodnji večplastnih plošč v skladu z IEC 62326-4. Večplastne plošče, ki jih tvorijo ti materiali, so primerne za postopke montaže brez svinca. Ta material se lahko uporablja tudi za vezavo drugih tipov laminatov. Prepreg je v skladu s tem standardom opredeljene gorljivosti (navpični preizkus gorljivosti). Ocena gorljivosti na popolnoma vulkaniziranem prepregu se doseže z uporabo nehalogeniranih zaščitnih sredstev proti požaru, ki so vsebovana kot sestavni del polimerne strukture. Po vulkanizaciji preprega v skladu z navodili dobavitelja je točka posteklenitve opredeljena pri 150°C in 200°C.

General Information

• Status: Published
• Publication Date: 14-Dec-2009
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: ITIV - Electronics assembly technology and Environmental standardization
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Oct-2009
• Due Date: 03-Jan-2010
• Completion Date: 15-Dec-2009
• Ref Project: EN 61249-4-16:2009 - Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61249-4-16:2010
01-januar-2010
0DWHULDOL]DWLVNDQHSORãþHLQGUXJHSRYH]RYDOQHVWUXNWXUHGHO3RVDPH]QH
]DKWHYH]DSUHSUHJPDWHULDOHEUH]EDNUHQHIROLMH]DL]GHODYRYHþSODVWQLKSORãþ6
VWHNOHQRWNDQLQRRMDþHQSUHSUHJGHILQLUDQHJRUOMLYRVWLQDYSLþQLSUHVNXV
JRUOMLYRVWLREGHODQ]PRGLILFLUDQRQHKDORJHQLUDQRHSRNVLGQRVPROR]DPRQWDåR
EUH]VYLQFD,(&
Materials for printed boards and other interconnecting structures -- Part 4-16: Sectional
specification set for prepreg materials, unclad (for the manufacture of multilayer boards) -
Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability
(vertical burning test) for lead-free assembly
Materialien für Leiterplatten und andere Verbindungsstrukturen – Teil 4-16:
Rahmenspezifikationen für unkaschierte Prepreg-Materialien (zur Herstellung von
Mehrlagenleiterplatten) - Mit E-Glasgewebe verstärkte Prepregs auf der Basis von
multifunktionalem halogenfreiem Epoxidharz mit definierter Brennbarkeit (Brennprüfung
mit vertikaler Prüflingslage) für bleifreie Bestückungstechnik
Matériaux pour circuits imprimés et autres structures d'interconnexion -- Partie 4-16:
Série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués (pour
la fabrication des cartes multicouches) - Tissu de verre époxyde préimprégné
multifonctionnel non halogéné de type E d'inflammabilité définie (essai de combustion
verticale) destiné aux assemblages sans plomb
Ta slovenski standard je istoveten z: EN 61249-4-16:2009
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61249-4-16:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61249-4-16:2010

---------------------- Page: 2 ----------------------

SIST EN 61249-4-16:2010

EUROPEAN STANDARD
EN 61249-4-16

NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM

ICS 31.180


English version


Materials for printed boards and other interconnecting structures -
Part 4-16: Sectional specification set for prepreg materials, unclad
(for the manufacture of multilayer boards) -
Multifunctional non-halogenated epoxide woven E-glass prepreg
of defined flammability (vertical burning test) for lead-free assembly
(IEC 61249-4-16:2009)

Matériaux pour circuits imprimés  Materialien für Leiterplatten und andere
et autres structures d'interconnexion - Verbindungsstrukturen -
Partie 4-16: Série de spécifications Teil 4-16: Rahmenspezifikationen
intermédiaires pour matériaux préimprégnés, für unkaschierte Prepreg-Materialien
non plaqués (zur Herstellung von Mehrlagenleiterplatten) -
(pour la fabrication des cartes multicouches) - Mit E-Glasgewebe verstärkte Prepregs
Tissu de verre époxyde préimprégné auf der Basis von multifunktionalem
multifonctionnel non halogéné de type E halogenfreiem Epoxidharz
d'inflammabilité définie mit definierter Brennbarkeit
(essai de combustion verticale) (Brennprüfung mit vertikaler Prüflingslage)
destiné aux assemblages sans plomb für bleifreie Bestückungstechnik
(CEI 61249-4-16:2009) (IEC 61249-4-16:2009)


This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61249-4-16:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61249-4-16:2010
EN 61249-4-16:2009 - 2 -
Foreword
The text of document 91/852/FDIS, future edition 1 of IEC 61249-4-16, prepared by IEC TC 91,
Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61249-4-16 on 2009-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61249-4-16:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60194 NOTE  Harmonized as EN 60194:2006 (not modified).
IEC 61249-2-7 NOTE  Harmonized as EN 61249-2-7:2002 (not modified).
IEC 61249-2-8 NOTE  Harmonized as EN 61249-2-8:2003 (not modified).
ISO 9000 NOTE  Harmonized as EN ISO 9000:2005 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61249-4-16:2010
- 3 - EN 61249-4-16:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61189-2 2006 Test methods for electrical materials, printed EN 61189-2 2006
boards and other interconnection structures
and assemblies -
Part 2: Test methods for materials for
interconnection structures


1) 2)
IEC 61249-2-37 - Materials for printed boards and other EN 61249-2-37 2009
interconnecting structures -
Part 2-37: Reinforced base materials, clad
and unclad - Modified non-halogenated
epoxide woven E-glass laminate sheets of
defined flammability (vertical burning test),
copper-clad for lead-free assembly


1) 2)
IEC 62326-4 - Printed boards - EN 62326-4 1997
Part 4: Rigid multilayer printed boards with
interlayer connections - Sectional specification


ISO 11014-1 1994 Safety data sheet for chemical products - - -
Part 1: Content and order of sections




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61249-4-16:2010

---------------------- Page: 6 ----------------------

SIST EN 61249-4-16:2010
IEC 61249-4-16
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD


Materials for printed boards and other interconnecting structures –
Part 4-16: Sectional specification set for prepreg materials, unclad (for the
manufacture of multilayer boards) – Multifunctional non-halogenated epoxide
woven E-glass prepreg of defined flammability (vertical burning test) for lead-
free assembly


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 31.180 ISBN 2-8318-1043-5
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61249-4-16:2010
– 2 – 61249-4-16 © IEC:2009(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Materials and construction.6
3.1 Reinforcement.6
3.2 Resin system.7
4 Properties.7
4.1 Properties related to the appearance of the prepreg .7
4.1.1 Dewetted areas (fish eyes) .7
4.1.2 Broken filaments.7
4.1.3 Distortion.7
4.1.4 Creases.7
4.1.5 Edge conditions.7
4.2 Properties related to B-stage prepreg.8
4.2.1 Resin content .8
4.2.2 Treated weight.8
4.2.3 Resin flow .8
4.2.4 Scaled flow thickness .8
4.2.5 Melting viscosity .9
4.2.6 Gel time.9
4.2.7 Volatile content.9
4.3 Properties related to prepreg after curing .9
4.3.1 Electric strength .9
4.3.2 Flammability .9
4.3.3 Relative permittivity and dissipation factor .10
4.3.4 Cured thickness.10
4.3.5 Glass transition temperature (Tg) .10
4.3.6 Decomposition temperature (Td).10
4.3.7 Thermal resistance .10
4.3.8 Z-axis expansion .10
5 Delivery form .11
5.1 Rolls.11
5.2 Sheets.11
5.3 Cut panels.11
6 Quality assurance.11
6.1 Quality system.11
6.2 Responsibility for inspection .11
6.3 Qualification inspection .11
6.4 Quality conformance inspection.12
6.5 Certificate of conformance.12
6.6 Safety data sheet .12
7 Packaging and marking .12
8 Shelf life.12
9 Ordering information.13
Bibliography.14

---------------------- Page: 8 ----------------------

SIST EN 61249-4-16:2010
61249-4-16 © IEC:2009(E) – 3 –

Table 1 – Flammability, vertical burning test .9
Table 2 – Decomposition temperature requirements .10
Table 3 – Thermal resistance requirements .10
Table 4 – Z-axis expansion requirements.11

---------------------- Page: 9 ----------------------

SIST EN 61249-4-16:2010
– 4 – 61249-4-16 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________

MATERIALS FOR PRINTED BOARDS AND
OTHER INTERCONNECTING STRUCTURES –

Part 4-16: Sectional specification set for prepreg materials,
unclad (for the manufacture of multilayer boards) –
Multifunctional non-halogenated epoxide woven E-glass prepreg
of defined flammability (vertical burning test) for lead-free assembly


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61249-4-16 has been prepared by IEC technical committee 91:
Electronics assembly technology.
The text of this standard is based on the following documents:
FDIS Report on voting
91/852/FDIS 91/864/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------
...