iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 10080:1997

(Main)

Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

This European Prestandard specifies requirements for the chemical composition and the mechanical and geometrical properties of weldable ribbed reinforcing steel in grade B500, categories A and B (designated as steels B500A and B500B, see table 1) used for the reinforcement of concrete structures in the form of - bars and coils or as elements for the manufacturing of welded fabric, - sheets of factory made machine welded fabric in the diameter ranges given in table 1.

Betonbewehrungsstahl - Schweißgeeigneter gerippter Betonstahl B 500 - Technische Lieferbedingungen für Stäbe, Ringe und geschweißte Matten

Diese Europäische Vornorm enthält die Anforderungen an die chemische Zusammensetzung sowie an die mechanischen und geometrischen Eigenschaften von schweißgeeignetem gerippten Betonstahl der Sorte B 500 in Kategorien A und B (entsprechend Tabelle 1 als Stähle B500A UND B500B bezeichnet), der in Form - von Stäben oder Ringen oder von Elementen zur Herstellung geschweißter Matten oder - von werksmäßig gefertigten maschinell geschweißten Matten in den Durchmesserbereichen nach Tabelle 1 für die Bewehrung von Betonbauwerken verwendet wird.

Acier pour l'armature du béton - Armatures pour béton armé soudables a verrous B 500 - Conditions techniques de livraison pour les barres, les couronnes et les treillis soudés

La présente prénorme européenne spécifie les prescriptions pour la composition chimique, les propriétés mécaniques et géométriques des armatures en acier pour béton armé soudables a verrous de nuance B 500, de catégories A et B (désignées B500A ET B500B, voir tableau 1) utilisées pour l'armature des structures en béton sous forme de: - barres et couronnes ou d'éléments constitutifs de treillis soudés, - panneaux de treillis soudés fabriqués en usine sur machine automatique, dans les gammes de diametres données au tableau 1.

Varivo rebrasto betonsko jeklo B 500 - Tehnični dobavni pogoji za palice, svitke in varjene mreže

General Information

Status
Withdrawn
Publication Date
30-Apr-1997
Withdrawal Date
31-Aug-2005
ICS
77.140.15 - Steels for reinforcement of concrete
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2005
Due Date
01-Sep-2005
Completion Date
01-Sep-2005
Directive
89/106/EEC - Construction products
Mandate
M/115 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on reinforcing and prestress. steel for concrete
Ref Project
ENV 10080:1995 - Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric

Relations

Replaced By
SIST EN 10080:2005 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Effective Date
01-Sep-2005

Buy Standard

ENV 10080:1997ENV 10080:1997
PreviousNext
Standardization document
ENV 10080:1997
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 10080:1997
01-maj-1997
9DULYRUHEUDVWREHWRQVNRMHNOR%7HKQLþQLGREDYQLSRJRML]DSDOLFHVYLWNHLQ
YDUMHQHPUHåH
Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 -
Technical delivery conditions for bars, coils and welded fabric
Betonbewehrungsstahl - Schweißgeeigneter gerippter Betonstahl B 500 - Technische
Lieferbedingungen für Stäbe, Ringe und geschweißte Matten
Acier pour l'armature du béton - Armatures pour béton armé soudables a verrous B 500 -
Conditions techniques de livraison pour les barres, les couronnes et les treillis soudés
Ta slovenski standard je istoveten z: ENV 10080:1995
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
SIST ENV 10080:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 10080:1997

---------------------- Page: 2 ----------------------

SIST ENV 10080:1997

---------------------- Page: 3 ----------------------

SIST ENV 10080:1997

---------------------- Page: 4 ----------------------

SIST ENV 10080:1997

---------------------- Page: 5 ----------------------

SIST ENV 10080:1997

---------------------- Page: 6 ----------------------

SIST ENV 10080:1997

---------------------- Page: 7 ----------------------

SIST ENV 10080:1997

---------------------- Page: 8 ----------------------

SIST ENV 10080:1997

---------------------- Page: 9 ----------------------

SIST ENV 10080:1997

---------------------- Page: 10 ----------------------

SIST ENV 10080:1997

---------------------- Page: 11 ----------------------

SIST ENV 10080:1997

---------------------- Page: 12 ----------------------

SIST ENV 10080:1997

---------------------- Page: 13 ----------------------

SIST ENV 10080:1997

---------------------- Page: 14 ----------------------

SIST ENV 10080:1997

---------------------- Page: 15 ----------------------

SIST ENV 10080:1997

---------------------- Page: 16 ----------------------

SIST ENV 10080:1997

---------------------- Page: 17 ----------------------

SIST ENV 10080:1997
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15630-2:2019(Main)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric and lattice girders (ISO 15630-2:2019)
EN ISO 15630-2:2019

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to welded fabric and lattice girders for the reinforcement of concrete.
NOTE       In some countries, the expression "welded wire reinforcement" is used in place of "welded (wire) fabric".
For those tests not specified in this document (e.g. bend test, rib/indentation geometry, mass per metre), ISO 15630-1 is applicable.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15630-3:2019(Main)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10)
EN ISO 15630-3:2019

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15630-1:2019(Main)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire (ISO 15630-1:2019)
EN ISO 15630-1:2019

This document specifies chemical and mechanical test methods and measurement methods of
geometrical characteristics applicable to reinforcing bars, rods and wire for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10348-2:2019(Main)
Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products
EN 10348-2:2018

This European Standard specifies requirements for hot-dip galvanized reinforcing steel in the form of products according to EN 10080 and subjected to further processing e.g. bent bars, stirrups, products straightened from coils, products cut from bars, welded structures (other than welded fabric or lattice girders according to prEN 10348 1) and any other components fabricated for use in the reinforcement of concrete.
This European Standard does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10080:2005(Main)
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10080:2005

This document specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:
-   bars, coils (rod, wire) and de-coiled products;
-   sheets of factory-made machine-welded fabric;
-   lattice girders.
1.2   Steels according to this document have a ribbed, indented or smooth surface.
1.3   This document does not apply to:
-   non-weldable reinforcing steel;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel;
-   corrosion resistant reinforcing steel;
-   prestressing steels (see prEN 10138-1 to -4);
-   indented strip;
-   further processing, e.g. cutting or cutting and bending.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10370:2019(Main)
Steel for the reinforcement of concrete - Stainless steel
prEN 10370

This document specifies product characteristic, test/assessment method and the way of expressing test results, for stainless steel as defined in EN 10088-1 and designated as in EN 10088-1 for the use of the reinforcement of concrete.
It applies to stainless steel products with ribbed or indented surfaces, which are in the form of:
-   bars and coils (rod, wire);
-   sheets of factory-made machine-welded fabric;
-   lattice girders and hybrid lattice girders composed by stainless steel and by weldable reinforcing steel according to EN 10080.
This document does not apply to:
-   pre-stressed stainless steels;
-   indented strip;
-   stainless steel tube filled with carbon steel swarf, which is then hot or cold reduced;
-   stainless steel smooth bar with weld material deposited on it;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel.

  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10080:2023(Main)
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
prEN 10080

1.1   This document specifies general requirements and definitions for the essential characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:
-   bars (including those produced by the reinforcing steel manufacturer from coil);
-   coils;
-   sheets of factory-made machine-welded fabric;
-   lattice girders.
1.2   Steels according to this document have a ribbed, indented or smooth surface.
NOTE 1   The protrusions between indentations of indented reinforcing steel have the same function as transverse ribs of ribbed reinforcing steel. There is no definition which specifies the difference between ribbed and indented surface geometry. Therefore, in this document, the same bond parameters are used for ribbed and indented steel.
1.3   This document does not apply to:
-   non-weldable reinforcing steel;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel;
-   corrosion resistant reinforcing steel;
-   prestressing steels;
-   indented strip;
-   further processing by a processor, e.g. de-coiling/straightening, cutting or cutting and bending.
NOTE 2   Further processing could influence some essential characteristics of the product.

  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10348:2006
Steel for the reinforcement of concrete - Galvanized reinforcing steel
prEN 10348-1

This European Standard specifies requirements for galvanized (hot-dip zinc coated) reinforcing steel in the form of bars, coils (rod, wire), welded fabric and lattice girder for the reinforcement of concrete.
It specifies seven classes of coating, class A to class G, corresponding to different coating masses (see 9.5.4).
This specification may also be understood to cover other classes of coating whose details are not stated in this edition of the standard but whose specified values of properties are defined consistenly with Clause 9 and the conformity of which is carried out according to Clause 10.
This European Standard does not apply to galvanized (hot-dip zinc coated) reinforcement for prestressing or components of these reinforcements.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10348:2023(Main)
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
prEN 10348

This document specifies requirements for hot-dip galvanized reinforcing steel in the form of products which meet the requirements of EN 10080 and subjected, where appropriate, to further processing, e.g. bars, bent bars, stirrups, products straightened from coils, products cut from bars, welded structures and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10370:2023(Main)
Steel for the reinforcement of concrete - Stainless steel
prEN 10370

This document specifies product characteristic test/assessment method and the way of expressing test results for stainless steel as defined in EN 10088-1:2014 and designated as in EN 10088-1:2014 for the use of the reinforcement of concrete.
It applies to stainless steel products with ribbed or indented surfaces, which are in the form of:
-   bars and coils (rod, wire);
-   sheets of factory-made machine-welded fabric;
-   lattice girders and hybrid lattice girders composed by stainless steel and by weldable reinforcing steel according to prEN 10080:2023.
Steels according to this document have a ribbed, indented or smooth surface.
NOTE   The protrusions between indentations of indented reinforcing steel have the same function as transverse ribs of ribbed reinforcing steel. There is no definition, which specifies the difference between ribbed and indented surface geometry. Therefore, in this document, the same bond parameters are used for ribbed and indented steel.
This document does not apply to:
-   pre-stressed stainless steels;
-   indented strip;
-   stainless steel tube filled with carbon steel swarf, which is then hot or cold reduced;
-   stainless steel smooth bar with weld material deposited on it;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel.

  • Draft
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day