SIST EN 4056-006:2014
(Main)Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard
Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard
This European Standard defines the characteristics of cable ties with either internal or external serrations manufactured entirely from PEEK material, for installation under controlled tension on aircraft cable harnesses. It shall be used together with EN 4056-001.
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 006: Kabelbinder aus Peek - Betriebstemperatur von -55 °C bis 240 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 006: Frettes en peek - Températures d'utilisation -55 °C à 240 °C - Norme de produit
Aeronavtika - Kabelske spojke za vezalno pasovje - 006. del: Kabelske spojke iz PEEK-a - Obratovalne temperature med –55 °C do 240 °C - Standard za proizvod
Standard EN 4056-006 določa značilnosti kabelskih spojk z notranjo ali zunanjo nazobčanostjo, v celoti proizvedenih iz materiala PEEK, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje. Uporabljati ga je treba s standardom EN 4056-001.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2014
Aeronavtika - Kabelske spojke za vezalno pasovje - 006. del: Kabelske spojke iz
PEEK-a - Obratovalne temperature med –55 °C do 240 °C - Standard za proizvod
Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating
temperatures -55 °C to 240 °C - Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 006: Kabelbinder aus
Peek - Betriebstemperatur von -55 °C bis 240 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 006: Frettes en peek -
Températures d'utilisation -55 °C à 240 °C - Norme de produit
Ta slovenski standard je istoveten z: EN 4056-006:2014
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 4056-006
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 006: Peek
cable ties - For operating temperatures -55 °C to 240 °C -
Product standard
Série aérospatiale - Frettes de câblage pour harnais - Partie Luft- und Raumfahrt - Befestigungsbänder für
006: Frettes en peek - Températures d'utilisation -55 °C à Leitungsbündel - Teil 006: Kabelbinder aus Peek -
240 °C - Norme de produit Betriebstemperatur von -55 °C bis 240 °C - Produktnorm
This European Standard was approved by CEN on 12 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-006:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics .5
4.1 Dimensions .5
4.2 Material .5
4.2.1 Temperature rating type .5
4.2.2 Flammability class .5
4.2.3 Colour .5
4.2.4 Burning behaviour .6
4.3 Application tool .6
5 Tests and requirements .7
6 Quality assurance .8
7 Designation .8
8 Marking .8
9 Packaging and storage .8
Foreword
This document (EN 4056-006:2014) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.