SIST EN 14912:2015
(Main)LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
This European Standard specifies the requirements for inspection and maintenance of LPG cylinder valves for reuse in cylinders that are filled in accordance with the requirements of EN 1439. It applies when the valve is inspected, or refurbished at the time of periodic inspection of the cylinder.
NOTE This European Standard may also be applied at any other time, for example when maintenance of the valve is necessary.
Flüssiggas-Geräte und Ausrüstungsteile - Inspektion und Wartung von Ventilen für Flaschen für Flüssiggas (LPG) zum Zeitpunkt der wiederkehrenden Inspektion der Flaschen
Diese Europäische Norm legt die Anforderungen an die Inspektion und Wartung von Ventilen für LPG-Flaschen für die Wiederverwendung in Flaschen fest, die nach den Anforderungen von EN 1439 befüllt werden. Sie gilt, wenn das Ventil zum Zeitpunkt der wiederkehrenden Inspektion der Flasche geprüft oder überholt wird.
ANMERKUNG Diese Europäische Norm kann zu jedem anderen Zeitpunkt angewendet werden, beispielsweise wenn die Wartung eines Ventils nötig ist.
Équipements pour GPL et leurs accessoires - Contrôle et entretien des robinets de bouteilles de GPL lors du contrôle périodique des bouteilles
La présente Norme européenne prescrit les exigences relatives au contrôle et à l'entretien des robinets de bouteilles de GPL destinés à être réutilisés dans des bouteilles remplies conformément aux exigences de l’EN 1439. Elle doit être appliquée lorsque le robinet est contrôlé, réparé ou rénové lors du contrôle périodique de la bouteille.
NOTE La présente Norme européenne peut également être appliquée à tout autre moment, par exemple lorsque l'entretien du robinet est nécessaire.
Oprema in pribor za utekočinjeni naftni plin (UNP) - Kontrola in vzdrževanje ventilov za jeklenko za UNP v času periodične kontrole jeklenk
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Y]GUåHYDQMHFlüssiggas-Geräte und Ausrüstungsteile - Inspektion und Wartung von Ventilen für Flaschen für Flüssiggas (LPG) zum Zeitpunkt der wiederkehrenden Inspektion der FlaschenÉquipements pour GPL et leurs accessoires - Contrôle et entretien des robinets de bouteilles de GPL lors du contrôle périodique des bouteillesLPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 14912:2015SIST EN 14912:2015en,fr,de01-junij-2015SIST EN 14912:2015SLOVENSKI
STANDARDSIST EN 14912:20061DGRPHãþD
SIST EN 14912:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14912
March 2015 ICS 23.060.40 Supersedes EN 14912:2005English Version
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders Équipements pour GPL et leurs accessoires - Contrôle et entretien des robinets de bouteilles de GPL lors du contrôle périodique des bouteilles
Flüssiggas-Geräte und Ausrüstungsteile - Inspektion und Wartung von Ventilen für Flaschen für Flüssiggas (LPG) zum Zeitpunkt der wiederkehrenden Inspektion der Flaschen This European Standard was approved by CEN on 26 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14912:2015 ESIST EN 14912:2015
EN 14912:2015 (E) 2 Contents Page
Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 General requirements .6 4.1 General .6 4.2 Cleaning .6 4.3 Personnel .6 4.4 Safety concerns .7 5 Inspections .7 5.1 General .7 5.2 External inspection .7 5.3 Additional inspection criteria .8 5.4 Pressure relief valves .8 5.4.1 General requirement .8 5.4.2 Individual test .8 5.4.3 Batch sampling test .9 5.5 Acceptance criteria .9 6 Maintenance .9 6.1 Minor repair .9 6.2 Refurbishment .9 6.2.1 General .9 6.2.2 Valve inspection during refurbishment .9 6.2.3 Valve repair during refurbishment . 10 7 Testing . 10 7.1 Refurbished valves . 10 7.2 All other valves . 10 8 Marking . 10 Bibliography . 12
SIST EN 14912:2015
EN 14912:2015 (E) 3 Foreword This document (EN 14912:2015) has been prepared by Technical Committee CEN/TC 286 “LPG Equipment and Accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document supersedes EN 14912:2005. The main changes between this version of this standard and the previous version are: — alignment with the requirement of paragraph 12 of Packing Instruction P200 of ADR; — introduction of inspection and refurbishment requirements for pressure relief valves. It is recommended that users develop an environmental management policy. For guidance, see EN ISO 14000 series, see [1], [2] and [3]. Users of this standard should consult FprCEN/TS 16765 [4] while implementing its requirements. This European Standard has been submitted for reference into the technical annexes of the ADR [5]. NOTE These regulations take precedence over any clause of this European Standard. It is emphasized that ADR is regularly revised at intervals of two years, which may lead to temporary non-compliances with the clauses of this European Standard. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14912:2015
EN 14912:2015 (E) 4 Introduction This European Standard has been prepared to reflect the current methods for periodically inspecting LPG cylinder valves, and is based upon the operating experience of millions of cylinder years of service over a period of more than 50 years. The primary objective of the periodic inspection of transportable refillable LPG cylinder valves is that, at the completion of the tests, the cylinder valve can be re-introduced into service for a further period of time. The valve inspection is an integral part of the periodic inspection of an LPG cylinder. Periodic inspections/tests shall be carried out by a competent person under the authorization of an inspection body based on a written scheme of examination. This European Standard calls for the use of substances and procedures that can be injurious to health if adequate precautions are not taken. It refers to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people. Where judgements are called for, it has been assumed that they are made by competent persons who have been trained specifically for the tasks. SIST EN 14912:2015
EN 14912:2015 (E) 5 1 Scope This European Standard specifies the requirements for inspection and maintenance of LPG cylinder valves, either manually operated or self-closing, for reuse. It applies when the valve is either inspected or refurbished at the time of periodic inspection of the cylinder. This European Standard may also be applied at any other time, for example, when maintenance of the valve is necessary. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13953, LPG equipment and accessories — Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) EN ISO 14245, Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing (ISO 14245) EN ISO 15995, Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated (ISO 15995) ISO 2859-1, Sampling procedures for inspection by attributes — Part 1:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.