SIST EN 4614:2009
(Main)Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
This standard specifies the characteristics of bearings, spherical plain with self lubricating liner in corrosion resisting steel with self-lubricating liner, wide series for aerospace applications.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range - 55 °C to 163 °C.
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, breite Reihe - Maße und Belastungen - Inch Reihe
Diese Norm legt die Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbst-schmierender Beschichtung, breite Reihe für die Anwendung in der Luft und Raumfahrt fest.
Sie sind für die Verwendung in starren oder beweglichen Teilen des Flugwerkes (der Luftfahrzeugstruktur) und deren Betätigungsvorrichtungen bestimmt.
Sie sind im Temperaturbereich von 55 °C bis 163 °C zu verwenden.
Série aérospatiale - Rotules lisses résistant à la corrosion à garniture autolubrifiante, série large - Dimensions et charges - Séries en inches
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo, široki tip - Mere in nosilnosti - Colski tip
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo, široki tip - Mere in nosilnosti - Colski tipLuft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, breite Reihe - Maße und Belastungen - Inch ReiheSérie aérospatiale - Rotules lisses résistant à la corrosion à garniture autolubrifiante, série large - Dimensions et charges - Séries en inchesAerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4614:2009SIST EN 4614:2009en01-september-2009SIST EN 4614:2009SLOVENSKI
STANDARD
SIST EN 4614:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4614June 2009ICS 49.035 English VersionAerospace series - Spherical plain bearings in corrosionresisting steel with self-lubricating liner, wide series -Dimensions and loads - Inch seriesSérie aérospatiale - Rotules lisses résistant à la corrosion àgarniture autolubrifiante, série large - Dimensions etcharges - Séries en inchesLuft- und Raumfahrt - Gelenklager auskorrosionsbeständigem Stahl mit selbstschmierenderBeschichtung, breite Reihe - Maße und Belastungen - InchReiheThis European Standard was approved by CEN on 19 March 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4614:2009: ESIST EN 4614:2009
EN 4614:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Symbols and abbreviations .45Requirements .56Designation . 127Marking . 128Technical specification . 12 SIST EN 4614:2009
EN 4614:2009 (E) 3 Foreword This document (EN 4614:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This standard was reviewed by the Domain Technical Coordinator of ASD-STAN's Mechanical Domain. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 4614:2009
EN 4614:2009 (E) 4 1 Scope This standard specifies the characteristics of bearings, spherical plain with self lubricating liner in corrosion resisting steel with self-lubricating liner, wide series for aerospace applications. They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms. They shall be used in the temperature range – 55 °C to 163 °C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2030, Aerospace —Steel FE-PM43 — Hardened and tempered — Bars D ≤ 150 mm 1
EN 2133, Aerospace series — Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys EN 2424, Aerospace series — Marking of aerospace products EN 2755, Aerospace series — Bearings, spherical plain in corrosion resisting steel with self-lubricating liner —Elevated loads at ambient temperature — Technical specification 2 EN 3161, Aerospace series — Steel FE-PM3801 (X5CrNiCu17-4) — Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm — Rm ≥ 930 MPa ISO 1132-1, Rolling bearings — Tolerances — Part 1: Terms and definitions ISO 8075, Aerospace — Surface treatment of hardenable stainless steel parts TR 4475, Aerospace series — Bearings and mechanical transmissions for airframe applications — Vocabulary 3
3 Terms and definitions For the purposes of this document, the terms and definitions given in TR 4475 apply. 4 Symbols and abbreviations Symbols of limit deviations are in accordance with definitions of ISO 1132-1. α = maximum angle of tilt of the outer ring with respect to the inner ring, with the spherical raceway of the outer r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.