SIST EN 10222-1:1998/A1:2003

Steel forgings for pressure purposes - Part 1 : General requirements for open die forgings

To introduce an Annex Z indicating that the standard addresses essential requirements of the Pressure Equipment Directive.

Schmiedestücke aus Stahl für Druckbehälter - Teil 1 : Allgemeine Anforderungen an Freiformschmiedestücke

Pieces forgées en acier pour appareils a pression - Partie 1: Prescriptions générales concernant les pieces obtenues par forgeage libre

Jekleni izkovki za tlačne posode - 1. del: Splošne zahteve za prosto kovane izkovke

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2003
• Withdrawal Date: 19-Apr-2017
• ICS: 77.140.30 - Steels for pressure purposes
• ICS: 77.140.85 - Iron and steel forgings
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Apr-2017
• Due Date: 13-May-2017
• Completion Date: 20-Apr-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: EN 10222-1:1998/A1:2002 - Steel forgings for pressure purposes - Part 1 : General requirements for open die forgings

Relations

• Replaced By: SIST EN 10222-1:2017 - Steel forgings for pressure purposes - Part 1: General requirements
• Effective Date: 19-Apr-2017
• Amends: SIST EN 10222-1:1998 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
• Effective Date: 08-Jun-2022
• Amends: SIST EN 10222-1:1998 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2003
-HNOHQLL]NRYNL]DWODþQHSRVRGHGHO6SORãQH]DKWHYH]DSURVWRNRYDQH
L]NRYNH
Steel forgings for pressure purposes - Part 1 : General requirements for open die
forgings
Schmiedestücke aus Stahl für Druckbehälter - Teil 1 : Allgemeine Anforderungen an
Freiformschmiedestücke
Pieces forgées en acier pour appareils a pression - Partie 1: Prescriptions générales
concernant les pieces obtenues par forgeage libre
Ta slovenski standard je istoveten z: EN 10222-1:1998/A1:2002
ICS:
77.140.30 Jekla za uporabo pod tlakom Steels for pressure purposes
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 10222-1:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2002
ICS 77.140.85
English version
Steel forgings for pressure purposes - Part 1 : General
requirements for open die forgings
Pièces forgées en acier pour appareils à pression - Partie Schmiedestücke aus Stahl für Druckbehälter - Teil 1 :
1: Prescriptions générales concernant les pièces obtenues Allgemeine Anforderungen an Freiformschmiedestücke
par forgeage libre
This amendment A1 modifies the European Standard EN 10222-1:1998; it was approved by CEN on 14 March 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10222-1:1998/A1:2002 E
worldwide for CEN nati
...