iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 6059-501:2010

(Main)

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test

This standard specifies a method of performing voltage proof tests on finished protection sleeves. It shall be used together with EN 6059-100.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 501: Spannungsfestigkeit

Diese Norm legt ein Verfahren für die Prüfung der Spannungsfestigkeit von Schutzummantelungen fest.
Sie ist gemeinsam mit EN 6059-100 zu verwenden.

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 501: Tenue en tension

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 501. del: Preskušanje napetosti

Ta standard opredeljuje metodo za izvajanje preskusov napetosti na dokončanih zaščitnih obojkah. Uporablja se skupaj z EN 6059-100.

General Information

Status
Published
Publication Date
13-Apr-2010
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Apr-2010
Due Date
18-Jun-2010
Completion Date
14-Apr-2010
Ref Project
EN 6059-501:2010 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test

Buy Standard

EN 6059-501:2010EN 6059-501:2010
PreviousNext
Standard
EN 6059-501:2010
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 6059-501:2010
01-junij-2010
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO3UHVNXãDQMHQDSHWRVWL
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 501: Voltage proof test
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 501: Spannungsfestigkeit
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 501: Tenue en tension
Ta slovenski standard je istoveten z: EN 6059-501:2010
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 6059-501:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6059-501:2010

---------------------- Page: 2 ----------------------

SIST EN 6059-501:2010


EUROPEAN STANDARD
EN 6059-501

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2010
ICS 49.060
English Version
Aerospace series - Electrical cables, installation - Protection
sleeves - Test methods - Part 501: Voltage proof test
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen, Installation -
Gaines de protection - Méthodes d'essais - Partie 501 : Schutzschläuche - Prüfverfahren - Teil 501:
Tenue en tension Spannungsfestigkeit
This European Standard was approved by CEN on 16 January 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-501:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6059-501:2010
EN 6059-501:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Dielectric test .4
3.1 Equipment .4
3.2 Preparation of specimens .4
3.3 Test procedure .4
3.4 Requirement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16602-60:2023(Main)
Space product assurance - Electrical, electronic and electromechanical (EEE) components
EN 16602-60:2023

The Scope of the Standard remains unchanged.
This standard defines the requirements for selection, control, procurement and usage of EEE components for space projects.
This standard differentiates between three classes of components through three different sets of standardization requirements (clauses) to be met.
The three classes provide for three levels of trade-off between assurance and risk. The highest assurance and lowest risk is provided by class 1 and the lowest assurance and highest risk by class 3. Procurement costs are typically highest for class 1 and lowest for class 3. Mitigation and other engineering measures may decrease the total cost of ownership differences between the three classes. The project objectives, definition and constraints determine which class or classes of components are appropriate to be utilised within the system and subsystems.
a.   Class 1 components are described in Clause 4.
b.   Class 2 components are described in Clause 5
c.   Class 3 components are described in Clause 6.
The requirements of this document apply to all parties involved at all levels in the integration of EEE components into space segment hardware and launchers.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4165-002:2023(Main)
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
EN 4165-002:2023

This document defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3475-505:2023(Main)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-505:2023

This document specifies a method of measuring the tensile properties of stranded conductors, strands, solid conductors and braids.
When required, it can be used also on finished cables.
It is intended to be used together with EN 3475-100.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4650:2023(Main)
Aerospace series - Wire and cable marking process, UV Laser
EN 4650:2023

This document is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers.
This document specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fibre optic cable to achieve an acceptable quality mark using equipment designed for UV laser wire marking of identification codes on aircraft wire and cable subject to EN 3475-100, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General. Wiring specified as UV laser markable and which has been marked in accordance with this document will conform to the requirements of EN 3838.
This document is applicable to the marking of airframe electrical wires and cables using ultraviolet (UV) lasers. The laser process practices defined in this document are mandatory.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4056-005:2023(Main)
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
EN 4056-005:2023

This document specifies the required characteristics of cable ties with a metallic locking device manufactured from plastics material, for installation under controlled tension on aircraft cable harnesses.
It is used together with EN 4056-001.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4708-203:2023(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
EN 4708-203:2022

This document specifies the required characteristics for heat-shrinkable semi rigid polyvinylidene identification sleeves for use in aircraft electrical systems at operating temperatures between -55 °C and 225 °C.
This specification is for the characterisation of Identification sleeves only.
This sleeving is a semi rigid tough product and is suitable for use where high temperatures and extreme fluid resistance properties are required.
It is available with a shrink ratio of 2:1.
The product is normally supplied with internal diameters up to 38 mm
The standard colours are white, black or yellow
For use at temperatures above 200 °C black with white or silver ink is recommended
Sizes or colours other than those specifically listed in this standard may be available. These items shall be considered to comply with this document if they comply with the property requirements listed in tables 2 and 3 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the evaluation. The sleeve will only be considered as meeting the requirements of this specification if printed with the printer, ribbon/inks and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4708-201:2023(Main)
Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
EN 4708-201:2022

This document specifies the required characteristics for heat-shrinkable polyolefin identification
sleeving for use in aircraft electrical systems at operating temperatures between −55 °C and 135 °C.
This specification is for the characterisation of identification sleeves only.
This sleeving is flexible and flame retarded, and is available with 2:1 and 3:1 shrink ratios.
The product is normally supplied with internal diameters up to 57 mm.
The standard colours are white or yellow.
Sizes or colours other than those specifically listed in this standard may be available. These items are
considered to comply with this document if they comply with the property requirements listed in tables 3
and 4 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the
evaluation. The sleeve will only be considered as meeting the requirements of this document if printed
with the printer, ribbon, inks, and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4703:2023(Main)
Aerospace series - Test specification for verification of the permeability of electrical insulation
EN 4703:2022

This document specifies a test that determines the ability of electrical equipment to withstand wet atmospheres in combination with variable ambient air pressure in particular in an aircraft installation. The main adverse effects to be anticipated are fluid ingress and related insulation breakdown.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2997-002:2023(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
EN 2997-002:2022

This document defines the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3375-011:2023(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
EN 3375-011:2022

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day