Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011)

Ta mednarodni standard določa metode merjenja notranjega premera, zunanjega premera (vključno s premerom nad ojačitvijo hidravličnih cevi), debeline sten, koncentričnost, obloge in debeline zunanje obloge, metode merjenja in prepoznavanja dolžin cevi in cevnih priključkov ter metode preverjanja izvrtine priključkov.

Gummi- und Kunststoffschläuche und -schlauchleitungen - Verfahren zur Messung der Maße von Schläuchen und Längen von Schlauchleitungen - Änderung 1: Klarstellung zur Bestimmung des Außendurchmessers (ISO 4671:2007/Amd1:2011)

Tuyaux et flexibles en caoutchouc et en plastique - Méthodes de mesurage des dimensions des tuyaux et de la longueur des flexibles - Amendement 1: Clarification concernant la position à laquelle le diamètre extérieur est mesuré (ISO 4671:2007/Amd 1:2011)

Gumene in polimerne cevi ter cevni priključki - Metode merjenja mer cevi ter dolžin cevnih priključkov - Dopolnilo 1: Pojasnilo za določitev zunanjega premera (ISO 4671:2007/Amd 1:2011)

Ta mednarodni standard določa metode merjenja notranjega premera, zunanjega premera (vključno s premerom nad ojačitvijo hidravličnih cevi), debeline sten, koncentričnost, obloge in debeline zunanje obloge, metode merjenja in prepoznavanja dolžin cevi in cevnih priključkov ter metode preverjanja izvrtine priključkov.

General Information

Status
Withdrawn
Publication Date
10-Apr-2014
Withdrawal Date
10-Apr-2022
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Apr-2022
Due Date
30-Apr-2022
Completion Date
11-Apr-2022

Relations

Buy Standard

Amendment
EN ISO 4671:2009/A1:2014
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4671:2009/A1:2014
01-maj-2014
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNL0HWRGHPHUMHQMDPHUFHYLWHUGROåLQ
FHYQLKSULNOMXþNRY'RSROQLOR3RMDVQLOR]DGRORþLWHY]XQDQMHJDSUHPHUD ,62
$PG
Rubber and plastics hoses and hose assemblies - Methods of measurement of the
dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of
position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011)
Gummi- und Kunststoffschläuche und -schlauchleitungen - Verfahren zur Messung der
Maße von Schläuchen und Längen von Schlauchleitungen - Änderung 1: Klarstellung zur
Bestimmung des Außendurchmessers (ISO 4671:2007/Amd1:2011)
Tuyaux et flexibles en caoutchouc et en plastique - Méthodes de mesurage des
dimensions des tuyaux et de la longueur des flexibles - Amendement 1: Clarification
concernant la position à laquelle le diamètre extérieur est mesuré (ISO 4671:2007/Amd
1:2011)
Ta slovenski standard je istoveten z: EN ISO 4671:2007/A1:2011
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 4671:2009/A1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4671:2009/A1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 4671:2009/A1:2014


EUROPEAN STANDARD
EN ISO 4671:2007/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 23.040.70; 83.140.40
English Version
Rubber and plastics hoses and hose assemblies - Methods of
measurement of the dimensions of hoses and the lengths of
hose assemblies - Amendment 1: Clarification of position at
which outside diameter is measured (ISO 4671:2007/Amd
1:2011)
Tuyaux et flexibles en caoutchouc et en plastique - Gummi- und Kunststoffschläuche und Schlauchleitungen -
Méthodes de mesurage des dimensions des tuyaux et de la Verfahren zur Messung der Maße von Schläuchen und
longueur des flexibles - Amendement 1: Clarification Längen von Schlauchleitungen - Änderung 1 (ISO
concernant la position à laquelle le diamètre extérieur est 4671:2007/Amd 1:2011)
mesuré (ISO 4671:2007/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 4671:2007; it was approved by CEN on 31 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4671:2007/A1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4671:2009/A1:2014
EN ISO 4671:2007/A1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4671:2009/A1:2014
EN ISO 4671:2007/A1:2011 (E)
Foreword
This document (EN ISO 4671:2007/A1:2011) has been prepared by Technical Committee ISO/TC 45 "Rubber
and rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 4671:2007 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and
conflicting national standards shall be withdrawn at the l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.