SIST EN 14351-1:2006+A1:2010/kFprA2:2016

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets

This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens.
This European Standard applies to:
-   Manually or power operated windows, French windows and screens for installation in vertical wall aper-tures and roof windows for installation in inclined roofs, complete with:
-   related hardware, if any;
-   weather stripping, if any;
-   glazed apertures when intended to have glazed apertures;
-   with or without incorporated shutters and/or shutterboxes and/or blinds;
and manually or power operated windows, roof windows, French windows and screens that are
-   fully or partially glazed including any non-transparent infill;
-   fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding).
-   Manually operated external pedestrian doorsets with flush or panelled leaves, complete with:
-   integral fanlights, if any;
-   adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
-   windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 14351-3);
-   rooflights according to EN 1873 and prEN 14963;
-   curtain walling according to EN 13830;
-   industrial, commercial and garage doors and gates according to EN 13241-1;
-   internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance re-quirements given in clause 4 can be relevant for internal doors (see prEN 14351-2);
(....)

Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren

Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1 : Fenêtres et blocs portes extérieurs pour piétons

Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in zunanja vrata

General Information

• Status: Not Published
• Public Enquiry End Date: 29-May-2016
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 19-Oct-2016
• Due Date: 24-Oct-2016
• Completion Date: 19-Oct-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: EN 14351-1:2006+A1:2010/FprA2 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets

Relations

• Consolidated By: SIST EN 14351-1:2006+A2:2016 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
• Effective Date: 18-Jan-2023
• Amends: SIST EN 14351-1:2006+A1:2010 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
• Effective Date: 01-May-2016

Overview

SIST EN 14351-1:2006+A1:2010/kFprA2:2016 is a crucial European Standard developed by CEN/TC 33 that specifies material-independent performance characteristics for windows and external pedestrian doorsets. This standard applies to various types of windows-including roof windows, door height windows, and French windows-as well as to external pedestrian doorsets and screens. It covers manually or power-operated products installed in vertical wall apertures and inclined roofs.

The document excludes fire resistance and smoke control characteristics, which are regulated separately by EN 16034. It is designed to support consistent evaluation of windows and doors in building applications, ensuring performance quality across Europe.

Key Topics

This standard focuses on the following key performance aspects of windows and doors:

• Material-Independent Performance: Covers attributes irrespective of the window or door material, such as functionality, weather resistance, and durability.
• Types of Products:
  • Fixed and openable windows including roof windows and door height windows.
  • External pedestrian doorsets with flush or panelled leaves.
  • Screens and assemblies like unframed glass doorsets and escape route doorsets.
• Product Components Included:
  • Related hardware and weather stripping.
  • Glazed apertures and non-transparent infills.
  • Incorporation of shutters, shutter boxes, and blinds.
  • Integral fanlights and adjacent parts within a single frame.
• Operational Variants: Manual or power-operated mechanisms for opening/closing windows, doors, and screens.
• Scope Exclusions:
  • Products subject to fire resistance and smoke control per EN 16034.
  • Rooflights (EN 1873, EN 14963), curtain walling (EN 13830).
  • Industrial, commercial, garage doors and gates (EN 13241).
  • Internal pedestrian doorsets (prEN 14351-2).
  • Revolving and power-operated pedestrian doorsets (EN 16361).
  • Windows intended for internal partition installations.

Applications

SIST EN 14351-1:2006+A1:2010/kFprA2:2016 standard is widely applicable in the construction and architectural industries, supporting:

• Building Design and Construction: Ensuring that windows and external pedestrian doorsets meet standardized performance requirements for residential and commercial buildings.
• Product Manufacturing: Providing manufacturers with a framework to test and certify product performance consistently.
• Quality Assurance: Assisting builders, architects, and specifiers in selecting compliant products, improving building envelope efficiency and occupant safety.
• Regulatory Compliance: Supporting compliance with European Building Directive requirements by defining essential product performance, except for fire and smoke control characteristics.
• Renovation and Retrofitting: Guiding refurbishment projects for window and door replacements to meet current performance standards.

Related Standards

• EN 16034: Addresses fire resisting and smoke control characteristics for pedestrian doorsets and openable windows, complementing EN 14351-1 by focusing on safety-related aspects.
• EN 13830: Specifies requirements for curtain walling structures, which are excluded from EN 14351-1.
• EN 13241: Covers industrial, commercial, and garage doors, distinct from pedestrian doorsets regulated by EN 14351-1.
• EN 1873 and EN 14963: Define product standards for rooflights, which are not covered under EN 14351-1.
• prEN 14351-2: Pertains to internal pedestrian doorsets, with some performance characteristics overlapping with EN 14351-1.
• EN 16361: Focuses on power-operated pedestrian doorsets excluding fire resistance and smoke leakage specifications.

---

By utilizing SIST EN 14351-1:2006+A1:2010/kFprA2:2016, stakeholders in the building industry can ensure windows and external pedestrian doorsets meet stringent European performance requirements. This enhances product reliability, user safety, and energy efficiency, fostering the production of high-quality building components compliant with EU regulations.

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2016
Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in zunanja
vrata
Windows and doors - Product standard, performance characteristics - Part 1: Windows
and external pedestrian doorsets
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und
Außentüren
Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1 : Fenêtres
et blocs portes extérieurs pour piétons
Ta slovenski standard je istoveten z: EN 14351-1:2006+A1:2010/FprA2
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 14351- en,fr,de
1:2006+A1:2010/kFprA2:2016
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

FINAL DRAFT
EUROPEAN STANDARD
EN 14351-
NORME EUROPÉENNE
1:2006+A1:2010
EUROPÄISCHE NORM
FprA2
March 2016
ICS 91.060.50
English Version
Windows and doors - Product standard, performance
characteristics - Part 1: Windows and external pedestrian
doorsets
Fenêtres et portes - Norme produit, caractéristiques de Fenster und Türen - Produktnorm,
performance - Partie 1 : Fenêtres et blocs portes Leistungseigenschaften - Teil 1: Fenster und
extérieurs pour piétons Außentüren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 33.
This draft amendment A2, if approved, will modify the European Standard EN 14351-1:2006+A1:2010. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14351-
worldwide for CEN national Members. 1:2006+A1:2010/FprA2:2016 E

Contents Page
European foreword . 3
1 Modification to the English title . 4
2 Modification to Clause 1, Scope . 4
3 Modifications to the final Bibliography . 5

European foreword
This document (EN 14351-1:2006+A1:
...