SIST EN 14351-1:2006+A1:2010
(Main)Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: - Manually or power operated windows, French windows and screens for installation in vertical wall apertures and roof windows for installation in inclined roofs, complete with: - related hardware, if any; - weather stripping, if any; - glazed apertures when intended to have glazed apertures; - with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are - fully or partially glazed including any non-transparent infill; - fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding). Manually operated external pedestrian doorsets with flush or panelled leaves, complete with:" - integral fanlights, if any; - adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications.
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und/oder Rauchdichtheit
Diese Europäische Norm gibt materialunabhängige Leistungseigenschaften an und gilt für Fenster (auch Dachflächenfenster, Dachflächenfenster mit Schutz gegen Brand von außen und Fenstertüren), Außentüren (einschließlich rahmenlose Glastüren, Flucht und Paniktüren) und zusammengesetzte Elemente.
Diese Europäische Norm gilt für:
- hand- oder kraftbetätigte Fenster, Fenstertüren und zusammengesetzte Elemente zum Einbau in verti-kale Wandöffnungen und Dachflächenfenster zum Einbau in geneigte Dächer mit:
- zugehörigen Beschlägen, sofern vorhanden;
- Dichtungen, sofern vorhanden;
- verglasten Öffnungen, sofern verglaste Öffnungen vorgesehen sind;
- mit oder ohne eingebaute Rollläden und/oder Rollladenkästen und/oder Abschlüssen;
sowie hand- oder kraftbetätigte Fenster, Dachflächenfenster, Fenstertüren und zusammengesetzte Elemente, die
- vollständig oder teilweise verglast einschließlich nicht transparenter Füllungen;
- feststehend oder teilweise feststehend oder mit einem oder mehreren zu öffnenden Flügeln (z. B. Klappflügel, Schwingflügel, Drehflügel, Schiebeflügel);
- handbetätigte Außentüren mit Sperr- oder Füllungstürblättern, ergänzt mit:
- integrierten Oberlichtern, sofern vorhanden;
- angrenzenden Seitenteilen, sofern vorhanden, in einem einzigen (gemeinsamen) Rahmen oder Zarge zum Einbau in eine gemeinsame Öffnung.
Die in dieser Europäischen Norm beschriebenen Produkte sind nicht für eine Anwendung als tragende Bauteile geeignet.
Diese Europäische Norm gilt nicht für:
- Fenster und Türen, die im Hinblick auf Rauchdichtheit und Feuerschutz den Bestimmungen von
prEN 16034 unterliegen, aber einzelne Eigenschaften und Leistungsanforderungen nach Abschnitt 4 können für diese Türen und Fenster von Bedeutung sein (siehe !prEN 16034");
- Lichtkuppeln nach EN 1873 und prEN 14963;
- Vorhangfassaden nach EN 13830;
- Tore nach EN 13241 1;
- (...)
Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1: Fenêtres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fumée
Le présente Norme européenne détermine les caractéristiques de performance, indépendantes des matériaux, qui sont applicables aux fenêtres (en y incluant fenêtres de toit, fenêtres de toit résistantes aux feux extérieurs et portes fenêtres), aux blocs portes extérieurs pour piétons (en y incluant portes vitrées sans châssis, blocs portes pour issue de secours) et aux ensembles composés.
Le présente Norme européenne s’applique aux :
- fenêtres, portes fenêtres et ensembles composés manuels ou motorisés pour être mis en œuvre dans des ouvertures de parois verticales et aux fenêtres de toit pour être mises en œuvre dans des toitures inclinées, complétés :
- de la quincaillerie, si elle existe ;
- des joints d’étanchéité, s’ils existent ;
- des ouvertures vitrées s’ils doivent en recevoir ;
- avec ou sans volets incorporés et/ou coffres de volets et/ou stores ;
et les fenêtres, portes-fenêtres et fenêtres de toit manuelles ou motorisées qui sont :
- complètement ou partiellement vitrées, incluant tout remplissage opaque ;
- fixes ou partiellement fixes ou ouvrantes avec un ou plusieurs vantaux (par exemple battantes, à projection, pivotantes, coulissantes) ;
- !blocs-portes extérieurs manuels pour piétons, avec vantaux plans ou menuisés, complétés :"
- d’impostes, si elles existent ;
- de parties adjacentes qui sont intégrées dans un châssis individuel afin d’être installé dans une seule ouverture, si elles existent.
Les produits couverts par la présente Norme européenne ne sont pas évalués pour des applications structurelles.
La présente Norme européenne ne s’applique pas aux :
- fenêtres et blocs portes pour piétons soumis à des réglementations concernant le dégagement de fumée et la résistance au feu qui relèvent du !prEN 16034" mais des caractéristiques individuelles et des exigences de performances données à l’Article 4 peuvent être adaptées à ces portes et fenêtres (voir !prEN 16034") ;
- lanterneaux qui relèvent de l’EN 1873 et le prEN 14963 ;
- murs rideaux qui relèvent de l’EN 13830 ;
- portes industrielles, commerciales et de garages qui relèvent de l’EN 13241-1 ;
- blocs portes intérieurs pour piétons qui relèvent du prEN 14351-2 mais des caractéristiques individuelles et des exigences de performance données à l’Article 4 peuvent être adaptées aux blocs portes intérieurs (voir prEN 14351-2) ;
- blocs portes à tambour ;
- fenêtres pour issues de secours.
Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in vrata brez določenih lastnosti požarne odpornosti in dimnotesnosti, vendar z vključeno odpornostjo strešnih oken proti požaru z zunanje strani
Ta evropski standard določa zahtevane lastnosti, neodvisne od materiala, ki se uporabljajo za okna (vključno s strešnimi okni, strešnimi okni z vključeno odpornostjo proti požaru z zunanje strani, in vrati z okni), vrata (vključno s steklenimi vrati brez okvirja, vrati za evakuacijske poti) in zaslone. Ta evropski standard velja za: - ročno ali gnano odpirana okna, vrata z okni in zaslone za namestitev v vertikalne odprtine v zidu in strešna okna za namestitev v strehe z naklonom, skupaj z: - morebitnim ustreznim okovjem; - morebitno vremensko zaščito; - zastekljenimi odprtinami, kadar je namen imeti zastekljene odprtine; - z ali brez vgrajenih naoknic in/ali rolet in/ali žaluzij; in ročno ali gnano odpirana okna, strešna okna, vrata z okni in zasloni, ki so – popolnoma ali delno zastekljena, vključno s kakršnimkoli neprosojnim polnilom; - pritrjena ali delno pritrjena ali ki se odpirajo z eno ali več oknicami/okvirji, (npr. obešena s tečaji, v vrtiščih, z odpiranjem navzven ali navznoter, drsna). Vrata z ročnim odpiranjem z ravnimi ali panelnimi krili, skupaj z: “ - morebitnimi vgrajenimi pahljačastimi okenci; - morebitnimi sosednjimi deli, ki so vsebovani v enotnem okvirju za vključitev v enotno odprtino. Proizvodi, ki jih zajema ta evropski standard, niso ocenjeni glede uporabe v konstrukcijah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und/oder RauchdichtheitFenêtres et portes - Norme produit, caractéristiques de performance - Partie 1: Fenêtres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fuméeWindows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 14351-1:2006+A1:2010SIST EN 14351-1:2006+A1:2010en,fr,de01-september-2010SIST EN 14351-1:2006+A1:2010SLOVENSKI
STANDARD
SIST EN 14351-1:2006+A1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14351-1:2006+A1
March 2010 ICS 91.060.50 Supersedes EN 14351-1:2006English Version
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1: Fenêtres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fumée
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und/oder Rauchdichtheit This European Standard was approved by CEN on 3 February 2006 and includes Amendment 1 approved by CEN on 31 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14351-1:2006+A1:2010: ESIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 2 Contents Page Foreword. 51Scope . 82Normative references . 92.1Classification standards . 92.2Test and calculation standards . 92.3Other standards . 113Terms and definitions . 124Performance characteristics and special requirements . 134.1General. 134.2Resistance to wind load . 134.3Resistance to snow and permanent load . 134.4Fire characteristics . 134.5Watertightness . 134.6Dangerous substances . 144.7Impact resistance . 144.8Load-bearing capacity of safety devices . 144.9Height and width of doorsets and French windows . 144.10Ability to release . 144.11Acoustic performance . 144.12Thermal transmittance . 144.13Radiation properties . 154.14Air permeability . 154.15Durability . 154.16Operating forces . 164.17Mechanical strength . 164.18Ventilation . 164.19Bullet resistance . 174.20Explosion resistance . 174.21Resistance to repeated opening and closing . 174.22Behaviour between different climates . 174.23Burglar resistance . 174.24Special requirements . 175Classification and designation . 186Handling, installation, maintenance and care . 237!Evaluation of conformity . 237.1General. 237.2Initial Type Testing (ITT) . 237.3Factory Production Control (FPC) . 267.4Initial inspection of factory and FPC . 287.5Continuous surveillance, assessment and approval of FPC . 287.6Testing of samples taken at the factory in accordance with a prescribed plan" . 298Labelling and marking. 29Annex A (informative)
Interdependence between characteristics and components . 30Annex B (normative)
Determination of sound insulation of windows . 33Annex C (informative)
Standards and draft standards on glass . 37Annex D (informative)
Examples of performance and requirement profiles of a roof window . 38SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 3 Annex E (normative)
Determination of characteristics . 40Annex F (informative)
Optional selection of representative test specimens for windows . 44Annex G (informative)
Examples of test sequences for optional combined determination of characteristics for windows . 46Annex H (normative)
!Selection, preparation, mounting and fixing of test specimen for testing roof windows in accordance with EN 13823 and EN ISO 11925-2 and field of direct application". 47Annex I (normative)
!Classification of air permeability of products with described product characteristics" . 50Annex J (normative)
!Thermal transmittance for windows with bars" . 51Annex ZA (informative)
!Clauses of this European Standard addressing the provisions of the EU Construction Product Directive" . 53Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC" . 68Annex ZC (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/95/EC" . 69Annex ZD (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 70Bibliography . 71 Figures Figure 1 — Relationship between various standards .5Figure H.1 — Test specimen and SBI test rig . 48Figure J.1 — Attached bar(s) . 51Figure J.2 — Single cross bar in the IGU with or without attached bars . 52Figure J.3 — Multiple cross bars in the IGU with or without attached multiple bars . 52Figure J.4 — Glazing bar (Georgian bar) . 52Figure ZA.1 — Example CE marking information for roof window . 65Figure ZA.2 — Example CE marking information for external pedestrian doorset – Example 1 . 66Figure ZA.3 — Example of CE marking information for external pedestrian doorset – Example 2 . 67Tables Table 1 — Classification of characteristics for windows . 19Table 2 — Classification of characteristics for external pedestrian doorsets . 21Table A.1 — Interdependence between characteristics and components . 31Table B.1 — Rw for window based on Rw for IGU . 35Table B.2 — Rw + Ctr for window based on Rw + Ctr for IGU . 35Table B.3 — Extrapolation rules for different window sizes . 36SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 4 Table D.1 — Examples of performance and requirement profiles of a roof window . 38Table E.1 — Separate determination of characteristics for windows . 40Table E.2 — Separate determination of characteristics for external pedestrian doorsets . 42Table F.1 — Optional selection of representative test specimens for windows . 44Table G.1 — Examples of optional test sequences for combined determination of characteristics for windows 46Table I.1 — Air permeability, classification of products with described product characteristics . 50Table J.1 — Thermal transmittance for windows with bars . 51Table ZA.1 — Relevant clauses (performance characteristics) . 54Table ZA.2 — System(s) of attestation of conformity (AoC) for external pedestrian doorsets and windows (including roof windows) . 56Table ZA.3a — Assignation of evaluation of conformity tasks for products under AoC system 1 . 58Table ZA.3b — Assignation of evaluation of conformity tasks for products under AoC system 3 . 60Table ZA.3c — Assignation of evaluation of conformity tasks for products under AoC system 4 . 61 SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 5 Foreword This document (EN 14351-1:2006+A1:2010) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. This document includes Amendment 1, approved by CEN on 2010-01-31. This document supersedes EN 14351-1:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags!"Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This European Standard is one of a series of standards for windows and pedestrian doorsets (see Figure 1).
Figure 1 — Relationship between various standards !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
EN 14351-1, Windows and doors - Product standard, performance characteristics - Part 1: Windows and ex-ternal pedestrian doorsets without resistance to fire and/or smoke leakage char-acteristics
(Harmonized standard)
!prEN 16034, Pedestrian doorsets, industrial, com-mercial, garage doors and windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteris-tics" (Harmonized standard)
EN 14600, Doorsets and openable windows with fire resisting and/or smoke control characteristics -
Requirements and classification
Supporting standards, prepared by CEN/TC 33 or others TCs, identified in Clause 2 of the supported standards
prEN 14351-2, Windows and doors - Product stan-dard, performance charac-teristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteris-tics (Harmonized standard) SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 6 For relationship with EU Directive(s), see informative Annexes ZA, ZB, ZC and ZD which are integral parts of this document." !NOTE Annex ZB was applicable until December 28th, 2009 and Annex ZD is applicable since December 29th, 2009." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 7 !Introduction The 1st amendment primarily adds details to previous clauses dealing with evaluation of conformity but without making any fundamental changes. The intention is to facilitate consistent interpretation particularly when ad-dressing the possibilities of cascading ITT. The concept of shared ITT results is not excluded, but will be clari-fied later. Furthermore, due to lack of updated supporting standards for powered pedestrian doors, these products have been excluded from the scope. The opportunity has also been taken in this amendment to amend several technical issues that were under query."
SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 8 1 Scope This European Standard identifies material independent performance characteristics that are applicable to win-dows (including roof windows, roof windows with external fire resistance and French windows), external pede-strian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: Manually or power operated windows, French windows and screens for installation in vertical wall aper-tures and roof windows for installation in inclined roofs, complete with: • related hardware, if any; • weather stripping, if any; • glazed apertures when intended to have glazed apertures; • with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are • fully or partially glazed including any non-transparent infill; • fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding). ! Manually operated external pedestrian doorsets with flush or panelled leaves, complete with:" • integral fanlights, if any; • adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to !prEN 16034" but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see !prEN 16034"); rooflights according to EN 1873 and prEN 14963; curtain walling according to EN 13830; industrial, commercial and garage doors and gates according to EN 13241-1; internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance re-quirements given in clause 4 can be relevant for internal doors (see prEN 14351-2); revolving doorsets; windows for escape routes. SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 9 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 2.1 Classification standards EN 1192, Doors — Classification of strength requirements EN 1522, Windows, doors, shutters and blinds — Bullet resistance — Requirements and classification ENV 1627, Windows, doors, shutters — Burglar resistance — Requirements and classification EN 12207:1999, Windows and doors — Air permeability — Classification EN 12208, Windows and doors — Watertightness — Classification EN 12210, Windows and doors — Resistance to wind load — Classification EN 12217, Doors — Operating forces — Requirements and classification EN 12219, Doors — Climatic influences — Requirements and classification EN 12400, Windows and pedestrian doors — Mechanical durability — Requirements and classification EN 13049, Windows — Soft and heavy body impact — Test method, safety requirements and classification EN 13115, Windows — Classification of mechanical properties — Racking, torsion and operating forces EN 13123-1, Windows, doors and shutters — Explosion resistance — Requirements and classification — Part 1: Shock tube EN 13123-2, Windows, doors, and shutters — Explosion resistance — Requirements and classification — Part 2: Range test 2.2 Test and calculation standards EN 179, Building hardware — Emergency exit devices operated by a lever handle or push pad — Require-ments and test methods EN 410, Glass in building — Determination of luminous and solar characteristics of glazing EN 947, Hinged or pivoted doors — Determination of the resistance to vertical load EN 948, Hinged or pivoted doors — Determination of the resistance to static torsion EN 949, Windows and curtain walling, doors, blinds and shutters — Determination of the resistance to soft and heavy body impact for doors EN 950, Door leaves — Determination of the resistance to hard body impact EN 1026, Windows and doors — Air permeability — Test method EN 1027, Windows and doors — Watertightness — Test method EN 1121, Doors — Behaviour between two different climates — Test method SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 10 EN 1125, Building hardware — Panic exit devices operated by a horizontal bar — Requirements and test methods ENV 1187, Test methods for external fire exposure to roofs EN 1191, Windows and doors — Resistance to repeated opening and closing — Test method EN 1523, Windows, doors, shutters and blinds — Bullet resistance — Test method ENV 1628, Windows, doors, shutters — Burglar resistance — Test method for the determination of resistance under static loading ENV 1629, Windows, doors, shutters — Burglar resistance — Test method for the determination of resistance under dynamic loading ENV 1630, Windows, doors, shutters — Burglar resistance — Test method for the determination of resistance to manual burglary attempts EN 12046-1, Operating forces — Test method — Part 1: Windows EN 12046-2, Operating forces — Test method — Part 2: Doors EN 12211, Windows and doors — Resistance to wind load — Test method EN 12354-3, Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound EN 12758:2002, Glass in building — Glazing and airborne sound insulation — Product descriptions and deter-mination of properties EN 13124-1, Windows, doors and shutters — Explosion resistance — Test method — Part 1: Shock tube EN 13124-2, Windows, doors and shutters — Explosion resistance — Test method — Part 2: Range test EN 13141-1:2004, Ventilation for buildings — Performance testing of components/products for residential venti-lation — Part 1: Externally and internally mounted air transfer devices !EN 13238, Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates" EN 13363-1, Solar protection devices combined with glazing — Calculation of solar and light transmittance — Part 1: Simplified method EN 13363-2, Solar protection devices combined with glazing — Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method ENV 13420, Windows — Behaviour between different climates — Test method !EN 13823, Reaction to fire tests for building products — Building products excluding floorings exposed to the thermal attack by a single burning item" EN 14608, Windows — Determination of the resistance to racking EN 14609, Windows — Determination of the resistance to static torsion EN ISO 140-3, Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation (ISO 717-1:1996) SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 11 !EN ISO 10077-1:2006 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General (ISO 10077-1:2006)" EN ISO 10077-2, Thermal performance of windows, doors and shutters — Calculation of thermal transmit-tance — Part 2: Numerical method for frames (ISO 10077-2:2003) !EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test (ISO 11925-2:2002)" EN ISO 12567-1, Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 1: Complete windows and doors (ISO 12567-1:2000) EN ISO 12567-2, Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) 2.3 Other standards EN 1863-2, Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of confor-mity/Product standard !EN 1935, Building hardware — Single-axis hinges — Requirements and test methods" EN 12150-2, Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard EN 12453:2000, Industrial, commercial and garage doors and gates — Safety in use of power operated doors — Requirements EN 12519:2004, Windows and pedestrian doors — Terminology !deleted text" EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using test data from reaction to fire tests EN 13501-5, Fire classification of construction products and building elements — Part 5: Classification using test data from external fire exposure to roof tests prEN 13633, Building hardware — Electrically controlled panic exit systems for use on escape routes — Re-quirements and test methods prEN 13637, Building hardware — Electrically controlled emergency exit systems for use on escape routes — Requirements and test methods EN 14179-2, Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard EN 14321-2, Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard EN 60335-2-103, Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2002) EN 61000-6-1, Electromagnetic compatibility (EMC) — Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments !(IEC 61000-6-1:2005)" EN 61000-6-3, Electromagnetic compatibility (EMC) — Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments !(IEC 61000-6-3:2006)" EN ISO 9001, Quality management systems — Requirements !(ISO 9001:2008)" SIST EN 14351-1:2006+A1:2010
EN 14351-1:2006+A1:2010 (E) 12 EN ISO 12543-2, Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass (ISO 12543-2:1998) ISO 1000:1992, SI units and recommendations for the use of their multiples and of certain other units 3 Terms and definitions For the purposes of this European Standard, units and symbols given in ISO 1000:1992, terms and definitions given in EN 12519:2004 and the following apply. 3.1 external pedestrian doorset doorset which separates the internal climate from the external climat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.