SIST EN 50571:2014

Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

This European Standard deals with the safety of electrical operated washing machines intended to be used by trained users in e.g. hotels, hospitals, factories, in light industry and on farms. It also covers washing machines declared for commercial use in public areas and operated by lay persons e.g. in laundrettes, communal laundry rooms. Their rated voltage being not more than 250 V for single phase and 480 V for others. This standard also covers washing machines making use of other energy sources. It does not cover requirements for these other energy sources or compressed air. However the influence of these other energy sources on the machines is covered. These washing machines are designed to be connected to hot and/or cold water supply. Washing machines making use of steam or hot water for heating purposes are also within the scope of this standard. This standard deals with the common hazards presented by washing machines that are encountered by all persons. However, in general, it does not take into account:
a) persons (including children) whose:
1) physical, sensory or mental capabilities, or
2) lack of experience and knowledge,
prevents them from using the washing machine safely without supervision or instruction;
b) children playing with the washing machine.
Attention is drawn to the fact that:
– for commercial electric washing machines intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary,
– in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities,
– for commercial electric washing machines having a drying function, EN 50570 (commercial electric tumble dryers) is also applicable.
This European Standard does not apply to:
c) industrial laundry machinery (EN ISO 10472-2),
d) washing machines intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). For the purpose of this standard, the term “appliance” is to be read as “washing machine intended for commercial use.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Besondere Anforderungen für elektrische Waschmaschinen für den gewerblichen Gebrauch

Appareils électrodomestiques et analogues - Sécurité - Règles particulières pour les machines à laver le linge à usage collectif

L’article de la Partie 1 est remplacé par l’article ci-après: La présente Norme européenne traite de la sécurité des machines à laver le linge électriques destinées à être utilisées par des usagers avertis, par exemple, dans des hôtels, des hôpitaux, chez des artisans et dans des fermes. Elle couvre également les machines à laver le linge déclarées pour un usage collectif dans des lieux publics et utilisées par des usagers non avertis, par exemple, dans des laveries automatiques et des buanderies mises à la disposition commune des usagers. Leur tension assignée n’est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. La présente norme couvre également les machines à laver le linge utilisant d’autres sources d’énergie. Elle ne couvre pas les exigences relatives à d’autres sources d’énergie ou à l’air comprimé. Toutefois, elle couvre l’influence de ces autres sources d’énergie sur les machines. Ces machines à laver le linge sont destinées à être raccordées à une alimentation en eau chaude et/ou froide. Les machines à laver le linge utilisant de la vapeur ou de l’eau chaude à des fins de chauffage relèvent également du domaine d’application de la présente norme. La présente norme traite des dangers ordinaires présentés par les machines à laver le linge et auxquels sont confrontés tous les individus. Cependant, cette norme ne tient pas compte en général: a)   des personnes (y compris des enfants) dont: 1)   les capacités physiques, sensorielles ou mentales; ou 2)   le manque d’expérience et de connaissance les empêchent d’utiliser la machine à laver le linge en toute sécurité sans surveillance ou instruction; b)   de l’utilisation des machines à laver le linge comme jouet par des enfants. L’attention est attirée sur le fait que: –   pour les machines à laver le linge électriques à usage collectif destinées à être utilisées dans des véhicules ou à bord de navires ou d’avions, des exigences supplémentaires peuvent être nécessaires; –   dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l’alimentation en eau et par des organismes similaires; –   pour les machines à laver le linge électriques ayant une fonction de séchage, la EN 50570 (sèche-linge à tambour électrique destiné à un usage collectif) est également applicable. La présente norme ne s’applique pas: –   aux machines de blanchisserie industrielle (EN ISO 10472-2); –   aux machines à laver le linge destinées à être utilisées dans des locaux présentant des conditions particulières, telles que la présence d’une atmosphère corrosive ou explosive (poussière, vapeur ou gaz). Pour les besoins de la présente norme, le terme « appareil » doit être lu comme « machine à laver le linge destinée à un usage collectif ».

Gospodinjski in podobni električni aparati - Varnost - Posebne zahteve za komercialne električne pralne stroje

Ta mednarodni standard opisuje varnost električnih pralnih strojev, ki naj bi jih uporabljali strokovno usposobljeni uporabniki, npr. v hotelih, bolnišnicah, tovarnah, lahki industriji in na kmetijah. Zajema tudi pralne stroje, namenjene komercialni uporabi na javnih mestih, ki jih uporabljajo nestrokovne osebe, npr. v javnih pralnicah. Njihova nazivna napetost ne sme presegati 250 V za enofazne naprave in 480 V za vse druge naprave. Ta standard zajema tudi pralne stroje, ki uporabljajo druge vire energije. Ne zajema zahtev za te druge vire energije ali stisnjen zrak. Zajema pa vpliv teh drugih virov energije na stroje. Pralni stroji so zasnovani tako, da se priključijo na oskrbo z vročo in/ali mrzlo vodo. Ta standard zajema tudi pralne stroje, ki uporabljajo paro ali vročo vodo za potrebe ogrevanja. Ta evropski standard obravnava splošna tveganja, ki jih za vse ljudi predstavljajo pralni stroji. Vendar na splošno ne upošteva:
a) oseb (tudi otrok), ki zaradi:
1) fizičnih, senzoričnih ali umskih sposobnosti oziroma
2)pomanjkanja izkušenj in znanja,
ne morejo varno uporabljati pralnih strojev brez nadzora ali navodil;
b) otrok, ki se igrajo s pralnim strojem.
Upoštevati je treba tudi:
– da so za komercialne električne pralne stroje, ki so namenjeni za uporabo v vozilih ali na krovu ladij ali letal, morda potrebne dodatne zahteve,
– da v številnih državah nacionalni zdravstveni organi, nacionalni organi, odgovorni za varstvo pri delu, nacionalni organi za oskrbo z vodo ter drugi podobni organi določajo dodatne zahteve,
– za komercialne električne pralne stroje s sušilno funkcijo velja tudi standard EN 50570 (komercialni električni sušilni stroji).
Ta evropski standard se ne uporablja za:
c) industrijske pralne stroje (EN ISO 10472-2),
d) pralne stroje, ki so namenjeni za uporabo na lokacijah, kjer veljajo posebne razmere, kot je prisotnost korozivne ali eksplozivne atmosfere (prah, hlapi ali plin). V tem standardu izraz »naprava«, kot je uporabljen v 1. delu, pomeni »pralne stroje, namenjene komercialni uporabi«.

General Information

• Status: Published
• Publication Date: 19-Dec-2013
• ICS: 97.060 - Laundry appliances
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Dec-2013
• Due Date: 21-Feb-2014
• Completion Date: 20-Dec-2013
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: EN 50571:2013 - Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

Relations

• Amended By: SIST EN 50571:2014/A1:2018 - Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
• Effective Date: 01-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50571:2014
01-januar-2014
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVW3RVHEQH]DKWHYH]D
NRPHUFLDOQHHOHNWULþQHSUDOQHVWURMH
Household and similar electrical appliances - Safety - Particular requirements for
commercial electric washing machines
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Besondere
Anforderungen für elektrische Waschmaschinen für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Règles particulières pour les
machines à laver le linge à usage collectif
Ta slovenski standard je istoveten z: EN 50571:2013
ICS:
97.060 Aparati za nego perila Laundry appliances
SIST EN 50571:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50571:2014

---------------------- Page: 2 ----------------------

SIST EN 50571:2014

EUROPEAN STANDARD
EN 50571

NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM

ICS 97.060


English version

Household and similar electrical appliances -
Safety -
Particular requirements for commercial electric washing machines



Appareils électrodomestiques et Sicherheit elektrischer Geräte für den
analogues - Hausgebrauch und ähnliche Zwecke -
Sécurité - Besondere Anforderungen für elektrische
Règles particulières pour les machines à Waschmaschinen für den gewerblichen
laver le linge à usage collectif Gebrauch




This European Standard was approved by CENELEC on 2013-06-10. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50571:2013 E

---------------------- Page: 3 ----------------------

SIST EN 50571:2014
EN 50571:2013 – 2 –


Contents
Page
Foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 9
7 Marking and instructions . 9
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 12
10 Power input and current . 12
11 Heating . 12
12 Void . 14
13 Leakage current and electric strength at operating temperature . 14
14 Transient overvoltages . 14
15 Moisture resistance . 14
16 Leakage current and electric strength . 15
17 Overload protection of transformers and associated circuits . 15
18 Endurance . 15
19 Abnormal operation . 16
20 Stability and mechanical hazards . 17
21 Mechanical strength . 19
22 Construction . 20
23 Internal wiring . 22
24 Components . 23
25 Supply connection and external flexible cords . 23
26 Terminals for external conductors. 23
27 Provision for earthing . 23
28 Screws and connections . 23
29 Clearances, creepage distances and solid insulation . 23
30 Resistance to heat and fire . 23
31 Resistance to rusting . 24
32 Radiation, toxicity and similar hazards . 24
Annex AA (normative) Detergent and rinsing agent . 26
Annex BB (normative) Ageing test for elastomeric parts . 27
Annex CC (normative) Emission of acoustical noise . 28
Annex ZE (informative) Specific additional requirements for appliances and machines intended for
commercial use . 31

---------------------- Page: 4 ----------------------

SIST EN 50571:2014
– 3 – EN 50571:2013
Annex ZZ (informative) Coverage of Essential Requirements of EU Directives. 32
Bibliography . 33

Figure
Figure 101  Probe for measuring surface temperatures . 24

Tables
Table 3  Maximum normal temperature rises . 14
Table AA.1  Composition of the detergent . 26
Table AA.2  Rinsing agent . 26

---------------------- Page: 5 ----------------------

SIST EN 50571:2014
EN 50571:2013 – 4 –

Foreword
This document (EN 50571:2013) has been prepared by CLC/TC 61 "Safety of household and similar
electrical appliances".


The following dates are fixed:

(dop) 2014-06-10
• latest date by which this document has to be implemented
at national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2016-06-10
this document have to be withdrawn
EN 50571:2013 is to be read in conjunction with EN 60335-1:2012 and its amendments, which is referred to
in this text as “Part 1”. This standard supplements or modifies the corresponding clauses of Part 1 as
indicated in the text.
NOTE The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced
clause or subclause;
– additional annexes are lettered AA, BB, etc.

This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
____________

---------------------- Page: 6 ----------------------

SIST EN 50571:2014
– 5 – EN 50571:2013
Introduction
This European Standard has been prepared to provide a means of conforming to essential safety
requirements of the Machinery Directive 2006/42/EC. Other requirements and other EU Directives may be
applicable to the machines within the scope of this standard.
This standard is a product family standard dealing with the safety of commercial electric washing machines
and takes precedence over horizontal and generic standards covering the same subject.
This standard recognises the level of protection against hazards such as electrical, mechanical, thermal, fire
and radiation of commercial electric washing machines when operated as in normal use taking into account
the manufacturer's instructions. It also covers any reasonably foreseeable misuse of the machinery and
takes into account the way in which electromagnetic phenomena can affect the safe operation of commercial
electric washing machines.
A commercial electric washing machine that complies with the text of this standard will not necessarily be
considered to comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
This standard takes into account the requirements of HD 60364-1 as far as possible so that there is
compatibility with the wiring rules when the machinery is connected to the supply mains. However, national
wiring rules may differ.

---------------------- Page: 7 ----------------------

SIST EN 50571:2014
EN 50571:2013 – 6 –

1 Scope
This clause of Part 1 is replaced by the following:
This European Standard deals with the safety of electrical operated washing machines intended to be used
by trained users in e.g. hotels, hospitals, factories, in light industry and on farms. It also covers washing
machines declared for commercial use in public areas and operated by lay persons e.g. in laundrettes,
communal laundry rooms. Their rated voltage being not more than 250 V for single phase and 480 V for
others.
This standard also covers washing machines making use of other energy sources. It does not cover
requirements for these other energy sources or compressed air. However the influence of these other energy
sources on the machines is covered.
These washing machines are designed to be connected to hot and/or cold water supply.
Washing machines making use of steam or hot water for heating purposes are also within the scope of this
standard.
This standard deals with the common hazards presented by washing machines that are encountered by all
persons. However, in general, it does not take into account:
a) persons (including children) whose:
1) physical, sensory or mental capabilities, or
2) lack of experience and knowledge,
prevents them from using the washing machine safely without supervision or instruction;
b) children playing with the washing machine.

Attention is drawn to the fact that:
– for commercial electric washing machines intended to be used in vehicles or on board ships or
aircraft, additional requirements may be necessary,
– in many countries additional requirements are specified by the national health authorities, the
national authorities responsible for the protection of labour, the national water supply authorities and similar
authorities,
– for commercial electric washing machines having a drying function, EN 50570 (commercial electric
tumble dryers) is also applicable.

This European Standard does not apply to:
c) industrial laundry machinery (EN ISO 10472-2),
d) washing machines intended to be used in locations where special conditions prevail, such as
the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
For the purpose of this standard, the term “appliance” is to be read as “washing machine intended for
commercial use.

---------------------- Page: 8 ----------------------

SIST EN 50571:2014
– 7 – EN 50571:2013
2 Normative references
This clause of Part 1 is applicable except as follows:
Addition:
EN 60204-1:2006/A1:2009, Safety of machinery  Electrical equipment of machines  Part 1: General
requirements (IEC 60204-1:2005/A1:2008)
EN 60335-1:2012, Household and similar electrical appliances  Safety  Part 1: General requirements
(IEC 60335-1:2010, modified)
EN 60704-1:2010 Household and similar electrical appliances  Test code for the determination of airborne
acoustical noise  Part 1: General requirements (IEC 60704-1:2010)
EN 60730-2-12:2006, Automatic electrical controls for household and similar use  Part 2-12: Particular
requirements for electrically operated door locks (IEC 60730-2-12:2005, modified)
EN ISO 3744, Acoustics  Determination of sound power levels and sound energy levels of noise sources
using sound pressure  Engineering methods for an essentially free field over a reflecting plane (ISO 3744)
EN ISO 3746, Acoustics  Determination of sound power levels and sound energy levels of noise sources
using sound pressure  Survey method using an enveloping measurement surface over a reflecting plane
(ISO 3746)
EN ISO 4871, Acoustics  Declaration and verification of noise emission values of machinery and
equipment (ISO 4871)
EN ISO 9614-2, Acoustics  Determination of sound power levels of noise sources using sound intensity 
Part 2: Measurement by scanning (ISO 9614-2)
EN ISO 11201, Acoustics  Noise emitted by machinery and equipment  Determination of emission sound
pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
plane with negligible environmental corrections (ISO 11201)
EN ISO 11203, Acoustics  Noise emitted by machinery and equipment  Determination of emission sound
pressure levels at a work station and at other specified positions from the sound power level (ISO 11203)
EN ISO 11688-1, Acoustics  Recommended practice for the design of low-noise machinery and equipment
 Part 1: Planning (ISO/TR 11688-1)
ISO 1817, Rubber, vulcanized or thermoplastic  Determination of the effect of liquids
Replace the reference to EN 62233 by:
EN 62233:2008, Measurement methods for electromagnetic fields of household appliances and similar
apparatus with regard to human exposure (IEC 62233:2005, modified)

3 Terms and definitions
This clause of Part 1 is applicable except as follows:
3.1.9
normal operation
Addition:
the appliance is filled with textile material having a mass in the dry condition equal to the maximum mass
stated in the instructions, and with the maximum quantity of water for which it is constructed. However, if the
power input or current is higher when only 50 % of the textile material is used, the appliance is operated with
this load instead
The temperature of the water is:
– 65 °C ± 5 °C for appliances without heating elements,
– 15 °C ± 5 °C for other appliances,

---------------------- Page: 9 ----------------------

SIST EN 50571:2014
EN 50571:2013 – 8 –

– 15 °C ± 5 °C for appliances without heating elements and intended for connection to the cold water
supply only.
If the appliance does not incorporate a programmer, the water is heated to 90 °C ± 5 °C or as high as the
construction will allow if lower, before starting the first washing period.
The textile material consists of pre-washed double-hemmed cotton sheets having dimensions approximately
70 cm × 70 cm and a specific mass between 140 g/m² and 175 g/m² in the dry condition.
For impeller type appliances, if the textile material does not move properly during operation,
– the quantity of textile material may be reduced until the maximum power input of the motor is attained,
or
– a textile material comprising pre-washed double-hemmed cotton sheets, having dimensions of
2 2
approximately 90 cm x 90 cm and a mass between 90 g/m and 110 g/m in the dry condition, may be
used.
However, for impeller type appliances, in case of doubt, the test should be carried out using the reduced
quantity of textile material.
Addition:
3.1.101
washing machine
appliances for cleaning and rinsing of textiles using water which may also have a means of extracting excess
water from the textiles
3.1.102
agitator washing machine
appliance in which the textiles are substantially immersed in the washing water, the mechanical action being
produced by a device moving about or along its vertical axis with a reciprocating motion (an agitator). This
device usually extends above the maximum water level
3.1.103
horizontal drum washing machine
appliance in which the textiles are placed in a horizontal or inclined drum and partially immersed in the
washing water, the mechanical action being produced by rotation of the drum about its axis, the movement
being either continuous or periodically reversed
3.1.104
impeller washing machine
appliance in which the textiles are substantially immersed in the washing water, the mechanical action being
produced by a device rotating about its axis continuously or reversing after a number of revolutions (an
impeller). The uppermost point of this device is substantially below the minimum water level
3.1.105
washer-dryer
appliance which includes also a means for drying the textiles, usually by heating and tumbling
3.1.106
spin extraction
water-extracting function by which water is removed from textiles by centrifugal force. This is usually included
as a function of an appliance
3.1.107
guard
part of the appliance specifically designed to provide protection by means of a physical barrier
3.1.108
operator
person or persons installing, operating, adjusting, maintaining, cleaning, repairing or moving appliances
3.1.109
workstation
place, as defined in the instructions of the relevant appliance, where the operator has to be in attendance to
operate, or to adjust, or to control the appliance

---------------------- Page: 10 ----------------------

SIST EN 50571:2014
– 9 – EN 50571:2013
Note 1 to entry: Example is the location where the operator loads the appliance.
3.1.110
public area
area in which the general public including children can enter
Note 1 to entry: Examples are launderettes, communal laundry rooms.
4 General requirement
This clause of Part 1 is applicable except as follows.
Replace the first paragraph with the following:
Appliances shall be constructed so that they function safely as to cause no danger to persons or
surroundings during normal use, even in the event of carelessness, and during installation, adjusting,
maintenance, cleaning, repairing or transportation.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows:
5.2 Addition:
The second and third sentence of the requirement are not applicable.

5.3 Addition:
The test of 15.101 is carried out before the test of 15.3.
The relevant tests of 21.101 and 21.102 are carried out before the test of Clause 18. The test of 22.104 is
carried out after the test of Clause 18.
5.7 Addition:
Doubt is considered to exist if the temperature of the water is within 6 K of the boiling point and the
difference between the temperature rise of the relevant part and the limit specified does not exceed 25 K
minus the room temperature.
6 Classification
This clause of Part 1 is applicable except as follows:
6.2 Addition:
Appliances shall be at least IPX4.
7 Marking and instructions
This clause of Part 1 is applicable except as follows:
7.1 Addition:
Appliances shall be marked in addition with:
– business name, and full address of the manufacturer and, where applicable, his authorised
representative,
– model or type reference, serial number if any and production year,
NOTE 101 Production year is the year when the production process is completed. The production year can be a part of the
serial number.
– designation of the appliance;
NOTE 102 The designation may be a combination of letters and/or numbers and shall enable to identify the appliance as
specified in the instructions.
– the water supply pressure or range of pressures, in kilopascals (kPa), for appliances intended to be
connected to a water supply, unless this is indicated in the instruction sheet,
– the maximum permissible steam supply pressure, in kilopascals (kPa), unless this is indicated in the
instruction sheet,

---------------------- Page: 11 ----------------------

SIST EN 50571:2014
EN 50571:2013 – 10 –

– the maximum permissible hot water supply pressure, in kilopascals (kPa), unless this is indicated in the
instruction sheet,
– the maximum permissible water, steam and hot water supply temperatures in degrees Celsius, unless
this is indicated in the instruction sheet.
Appliances without automatic water level control shall be marked with the maximum water level.
Appliances not intended for connection to the hot water supply and not provided with heating elements shall
be marked with the substance of the following:
CAUTION: Do not connect to the hot water supply.
7.10 Addition:
If the off position is only indicated by letters, the word "off" shall be used.
7.12 Replace the first sentence in the requirement of Part 1 with the following:
Instructions shall be provided with the appliance so that the appliance can be used safely.
The instructions shall contain at least the following information:
– the business name and full address of the manufacturer and, where applicable, his authorised
representative;
– model or type reference of the appliance as marked on the appliance itself, except for the serial number;
– the designation of the appliance together with its explanation in case it is given by a combination of
letters and/or numbers; the designation shall enable the identification of the appliance as specified in the
instructions;
– the general description of the appliance, when needed due to the complexity of the appliance;
– specific precautions if required during installation, operation, adjusting, user maintenance, cleaning,
repairing or moving;
– when needed drawings, diagrams, descriptions and explanations necessary for the safe use and user
maintenance of the appliance;
– the possible reasonably foreseeable misuse and, whenever relevant, a warning against the effects it may
have on the safe use of the appliance.
The manufactures shall declare if the appliance is also intended to be used in public areas. If the appliance
is not suitable for use in public areas the instruction shall include the substance of the following warning:
CAUTION  This appliance shall not be installed where the public has access
The front cover of the instructions shall include the substance of the following warning:
CAUTION Read the instructions before using the appliance.
This wording may be replaced by symbols ISO 7000-0434 and ISO 7000-0790.
If symbols ISO 7000-0434 and ISO 7000-0790 are used, their meaning shall be explained.
The words ‘Original instructions’ shall appear on the language version(s) verified by the manufacturer or by
the authorised representative.
When a translation of the original instructions has been provided by a person introducing the appliance on
the market; the meaning of the sentence ‘Translation of the original instructions’ has to appear in the relevant
instructions delivered with the appliance.
The instructions needed for maintenance/service to be done by specialised personnel, mandated by the
manufacturer or the authorised representative, and may be supplied in only one Community language which
the specialised personnel understand.
The instructions shall indicate the type and frequency of inspections and maintenance required for safe
operation including the preventive maintenance measures.
The instructions shall specify the maximum mass of dry cloth in kilograms to be used in the appliance.

---------------------- Page: 12 ----------------------

SIST EN 50571:2014
– 11 – EN 50571:2013
The instructions for not electrical heated appliances shall state that adequate ventilation has to be provided
to avoid the back flow of gases into the room from appliances burning other fuels.
7.12.1 Addition:
For appliances having ventilation openings in the base, the installation instructions shall state that the
openings shall not be obstructed by a carpet or similar.
Add the following new sub-clauses:
7.12.101 Specific instructions shall be given, when necessary as follows:
– on use, transportation, assembly, dismantling when out of service, testing or foreseeable
breakdowns, if these operations have consequences on stability of the appliance in order to avoid
overturning, falling or uncontrolled movements of the appliance or of its component parts. The
instructions concerning the safe transportation of the packed appliance, should be stated on the
package or should be delivered together with the package.
– on how to maintain adequate mechanical stability when in use, during transportation, assembly,
dismantling, scrapping and any other action involving the appliance;
– on the operating method to be followed in the event of accident or breakdown; if a blockage is likely
to occur the operating method to safely unblock the appliance.
Compliance is checked by inspection.
7.12.102 Information shall be given that only authorised spare parts shall be used in the event of
failure.
Compliance is checked by inspection.
7.12.103 The instructions shall include a noise emission declaration as indicated in Annex CC.
This includes
- the A-weighted emission sound pressure level at workstations, where this exceeds 70 dB(A). If the A-
weighted emission sound pressure level is below 70 dB, no value need be given, but the instructions shall
state that the A-weighted emission sound pressure level is below 70 dB,
- the A-weighted sound power level emitted by the appliance, where the A-weighted emission sound
pressure level at workstations exceeds 80 dB(A).
Compliance is checked by inspection.
7.12.104 The instructions shall give information on the detergents or other liquids that may be used. It
shall also give information about particular chemical substances which shall not be used.
Compliance is checked by inspection.
7.12.105 The instructions shall include a warning that the appliance shall be disconnected from its
power source during service and when replacing parts and, if that the removal of the plug is fore
...