SIST EN 17888-1:2024
(Main)Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test
Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test
This document specifies a test method for the in situ testing of the thermal performance of building structures especially built for the purpose of the test.
This document also specifies the apparatus to be used and the measurement procedures to collect the data and the reporting format for the apparatus including the building test structure and the test conditions.
NOTE The analysis of the data and the reporting format for the analysis are referred to in prEN 17888-2.
This document does not apply to:
- existing buildings;
- building structures allowing direct solar gains through glazing surfaces;
- the determination of the thermal performance of a specific building product, material, component or element.
Wärmetechnisches Verhalten von Gebäuden - In-situ-Messung von Gebäudeteststrukturen - Teil 1: Datenerfassung für den Gesamtwärmeverlusttest
Dieses Dokument legt ein Prüfverfahren für die In situ-Prüfung des wärmetechnischen Verhaltens von Baukörpern fest, die speziell für den Zweck der Prüfung gebaut wurden.
Dieses Dokument legt auch die zu verwendenden Geräte und die Messverfahren zur Erfassung der Daten sowie das Berichtsformat für das Gerät einschließlich der Bauwerksprüfkörper und der Prüfbedingungen fest.
ANMERKUNG Die Auswertung der Daten und das Berichtsformat für die Auswertung sind in prEN 17888-2 enthalten.
Dieses Dokument gilt nicht für:
- bestehende Gebäude;
- Baukörper, die direkte solare Gewinne durch Verglasungsflächen ermöglichen;
- die Bestimmung des wärmetechnischen Verhaltens eines bestimmten Bauprodukts, Materials, Bauteils oder Elements.
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 1 : Collecte des données pour le test de perte de chaleur globale
Le présent document spécifie une méthode d’essai permettant de réaliser un essai in situ de la performance thermique de structures de bâtiments tout particulièrement construites pour le besoin de l’essai.
Le présent document spécifie également l’appareillage à utiliser, les procédures de mesure pour collecter les données, ainsi que le format du rapport pour l’appareillage, comprenant la structure de bâtiment d’essai et les conditions d’essai.
NOTE L’analyse des données et le format du rapport pour l’analyse sont référencés dans la prEN 17888-2.
Le présent document ne s’applique pas aux cas suivants :
- bâtiments existants ;
- structures de bâtiments permettant des apports solaires directs à travers les surfaces vitrées ;
- détermination de la performance thermique d’un produit, matériau, composant ou élément spécifique du bâtiment.
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu vgradnje - 1. del: Zbiranje podatkov za preskus skupnih toplotnih izgub
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17888-1:2024
01-julij-2024
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu
vgradnje - 1. del: Zbiranje podatkov za preskus skupnih toplotnih izgub
Thermal performance of buildings - In situ testing of building test structures - Part 1: Data
collection for aggregate heat loss test
Wärmetechnisches Verhalten von Gebäuden - In-situ-Messung von
Gebäudeteststrukturen - Teil 1: Datenerfassung für den Gesamtwärmeverlusttest
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 1 :
Collecte des données pour le test de perte de chaleur globale
Ta slovenski standard je istoveten z: EN 17888-1:2024
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN 17888-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17888-1:2024
---------------------- Page: 2 ----------------------
SIST EN 17888-1:2024
EN 17888-1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 91.120.10
English Version
Thermal performance of buildings - In situ testing of
building test structures - Part 1: Data collection for
aggregate heat loss test
Performance thermique des bâtiments - Essais in situ Wärmetechnisches Verhalten von Gebäuden - In-situ-
des structures de bâtiments d'essai - Partie 1 : Collecte Messung an Bauwerksprüfkörpern - Teil 1:
de données pour l'essai de déperdition thermique Datenerfassung für die Prüfung des
globale Gesamtwärmeverlustes
This European Standard was approved by CEN on 27 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17888-1:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17888-1:2024
EN 17888-1:2024 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and units . 7
3.1 Terms and definitions . 7
3.2 Symbols and units . 10
4 Principle . 10
5 Requirements for the building test structure . 10
5.1 Design requirements for building test structure . 10
5.2 Location of the building test structure . 11
5.3 Thermal qualification of the building test structure . 11
5.4 D
...
SLOVENSKI STANDARD
oSIST prEN 17888-1:2022
01-november-2022
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu
vgradnje - 1. del: Zbiranje podatkov za preskus skupnih toplotnih izgub
Thermal performance of buildings - In situ testing of building test structures - Part 1: Data
collection for aggregate heat loss test
Wärmetechnisches Verhalten von Gebäuden - In-situ-Messung von
Gebäudeteststrukturen - Teil 1: Datenerfassung für den Gesamtwärmeverlusttest
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 1 :
Collecte des données pour le test de perte de chaleur globale
Ta slovenski standard je istoveten z: prEN 17888-1
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
oSIST prEN 17888-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17888-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17888-1:2022
DRAFT
EUROPEAN STANDARD
prEN 17888-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2022
ICS 91.120.10
English Version
Thermal performance of buildings - In situ testing of
building test structures - Part 1: Data collection for
aggregate heat loss test
Performance thermique des bâtiments - Essais in situ Wärmetechnisches Verhalten von Gebäuden - In-situ-
de structures de bâtiments d'essai - Partie 1 : Collecte Messung an Bauwerksprüfkörpern - Teil 1:
de données pour l'essai de déperdition thermique Datenerfassung für die Prüfung des
globale Gesamtwärmeverlustes
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 89.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17888-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17888-1:2022
prEN 17888-1:2022 (E)
Contents Page
EUROPEAN FOREWORD . 4
INTRODUCTION. 5
1 SCOPE . 7
2 NORMATIVE REFERENCES . 7
3 TERMS, DEFINITIONS, SYMBOLS AND UNITS. 8
3.1 TERMS AND DEFINITIONS . 8
3.2 SYMBOLS AND UNITS . 11
4 PRINCIPLES OF THE TEST METHOD . 11
5 REQUIREMENTS FOR THE BUILDING TEST STRUCTURE .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.