iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 12572:2016/A1:2025

(Amendment)

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)

Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß - Änderung 1 (ISO 12572:2016/Amd 1:2024)

Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle - Amendement 1 (ISO 12572:2016/Amd 1:2024)

Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO 12572:2016/Amd 1:2024)

General Information

Status
Published
Public Enquiry End Date
25-Jul-2024
Publication Date
10-Dec-2024
ICS
91.100.01 - Construction materials in general
91.120.10 - Thermal insulation of buildings
91.120.30 - Waterproofing
Technical Committee
TOP - Thermal insulation
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Nov-2024
Due Date
16-Jan-2025
Completion Date
11-Dec-2024
Ref Project
EN ISO 12572:2016/A1:2024 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)

Relations

Amends
SIST EN ISO 12572:2016 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
Effective Date
01-Jan-2025

Buy Standard

EN ISO 12572:2016/A1:2025EN ISO 12572:2016/A1:2025
PreviousNext
Amendment
EN ISO 12572:2016/A1:2025
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2025
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje
lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO
12572:2016/Amd 1:2024)
Hygrothermal performance of building materials and products - Determination of water
vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd
1:2024)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß -
Änderung 1 (ISO 12572:2016/Amd 1:2024)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle -
Amendement 1 (ISO 12572:2016/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 12572:2016/A1:2024
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
91.120.30 Zaščita pred vlago Waterproofing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12572:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 91.120.10
English Version
Hygrothermal performance of building materials and
products - Determination of water vapour transmission
properties - Cup method - Amendment 1 (ISO
12572:2016/Amd 1:2024)
Performance hygrothermique des matériaux et Wärme- und feuchtetechnisches Verhalten von
produits pour le bâtiment - Détermination des Baustoffen und Bauprodukten - Bestimmung der
propriétés de transmission de la vapeur d'eau - Wasserdampfdurchlässigkeit - Verfahren mit einem
Méthode de la coupelle - Amendement 1 (ISO Prüfgefäß - Änderung 1 (ISO 12572:2016/Amd
12572:2016/Amd 1:2024) 1:2024)
This amendment A1 modifies the European Standard EN ISO 12572:2016; it was approved by CEN on 1 September 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12572:2016/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 12572:2016/A1:2024) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of
which is held by SIS.
This Amendment to the European Standard EN ISO 12572:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2025, and
conflicting national standards shall be withdrawn at the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12572:2016/Amd 1:2024 has been approved by CEN as EN ISO 12572:2016/A1:2024
without any modif
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14880-2:2025(Main)
Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2024)
EN ISO 14880-2:2024

ISO 14880-2:2006 specifies methods for testing wavefront aberrations for microlenses within microlens arrays. It is applicable to microlens arrays with very small lenses formed inside or on one or more surfaces of a common substrate.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61000-3-2:2019/A2:2025(Amendment)
Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
EN IEC 61000-3-2:2019/A2:2024
  • Amendment
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22476-16:2025(Main)
Geotechnical investigation and testing - Field testing - Part 16: Borehole shear test (ISO 22476-16:2024)
EN ISO 22476-16:2024

This standard describes the test method covering the procedure for drilling the borehole, inserting the probe, and performing the test in soils and weak rock by axial shearing of the borehole wall. It does not include high pressure testing in hard rock. The test works best in sands, silts, clays and weak rocks, which will maintain open test cavity or which can be held open with drilling fluid.
NOTE   This document is intended to be used in conjunction with EN 1997-2. EN 1997-2 defines the way ground investigation has to be done to define a reliable ground model including resistance of soils and rocks.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61812-1:2025(Main)
Time relays and coupling relays for industrial and residential use - Part 1: Requirements and tests
EN IEC 61812-1:2024

This part of the IEC 61812 series applies to time relays and coupling relays for industrial applications (e.g. control, automation, signal and industrial equipment) and for automatic electrical controls for use in, on, or in association with equipment for residential and similar use.
The term "relay" as used in this document comprises all types of relays with specified time functions and coupling relays, other than measuring relays.
This document defines type test and routine test to confirm the service condition.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80369-20:2025(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2024)
EN ISO 80369-20:2024

NOTE            Clause A.2 contains guidance or rationale for this clause.
This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-920:2025(Main)
Ergonomics of human-system interaction - Part 920: Tactile and haptic interactions (ISO 9241-920:2024)
EN ISO 9241-920:2024

This part of ISO 9241 gives recommendations for tactile/haptic hardware and software interactions. It provides guidance on the design and selection of hardware, software, and combinations of hardware and software interactions, including
•   the design/use of tactile/haptic inputs, outputs, and/or combinations of inputs and outputs, with general guidance on their design/use as well as on designing/using combinations of tactile and haptic interactions for use in combination with other modalities or as the exclusive mode of interaction,
•   the tactile/haptic encoding of information, including textual data, graphical data and controls,
•   the design of tactile/haptic objects,
•   the layout of tactile/haptic space, and
•   interaction techniques.
For guidance and recommendations on the accessibility of tactile/haptic interactions, including information on the use of braille, see ISO 9241-971. It does not provide recommendations specific to braille but can apply to interactions that make use of braille.
The recommendations given in this part of ISO 9241 are applicable to a variety of tactile/haptic devices, representing the real world or virtual or mixed realities (e.g. exoskeletons, wearables, force feedback devices, touchables, tangibles) and stimulation types (e.g. acoustic radiation pressure, electrical muscle stimulation) and they can also be found in virtual and augmented environments.
This document does not include guidance on the role of walking in virtual or mixed realities for tactile/haptic interaction.
NOTE   It is recognized that some interactive scenarios might be constrained by the limitation that a real workspace is to be modelled in a virtual environment. Objects can be in suboptimal positions or conditions for haptic interaction by virtue of the situation being modelled.
This document provides general information about how various forms of interaction can be applied to various user tasks. The use of gestures (e.g. multitouch) can be found in ISO 9241-960. Information on gesture-based interfaces can be found in the multipart standard ISO/IEC 30113. Information on contactless gestures can be found in ISO TS 9241-430.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19403-5:2025(Main)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024)
EN ISO 19403-5:2024

ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-5:2017 assumes that the information of surface tension of the liquid to be tested and the surface free energy of the dispersive reference solids is known.
[1] This term is defined in DIN 1342-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19403-4:2025(Main)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2024)
EN ISO 19403-4:2024

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference liquid, is known.
[1] This term is defined in DIN 1342-1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 19144-3:2025(Main)
Geographic information - Classification systems - Part 3: Land Use Meta Language (LUML) (ISO/TS 19144-3:2024)
CEN ISO/TS 19144-3:2024

N/A

  • Technical specification
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day