Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancillary equipment

The present document, together with EN 301 489-1 [1], covers the assessment of "3rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) base station equipment, repeaters and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment (base station (BS), and repeaters) are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria of "3rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) base station radio equipment and associated ancillary equipment.
Examples of base station equipment covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 23. del: Posebni pogoji za radijsko, ponavljalniško (repetitorsko) in pomožno opremo baznih postaj (BS) po standardu IMT-2000 s CDMA (kodno porazdeljenim sodostopom) in neposredno modulacijo po razpršenem spektru (“Direct Spread”) (UTRA - prizemni dostop do UMTS)

General Information

Status
Published
Publication Date
27-Jan-2008
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Jan-2008
Due Date
24-Mar-2008
Completion Date
28-Jan-2008
Mandate

Buy Standard

Standard
EN 301 489-23 V1.3.1:2008
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 23. del: Posebni pogoji za radijsko, ponavljalniško (repetitorsko) in pomožno opremo baznih postaj (BS) po standardu IMT-2000 s CDMA (kodno porazdeljenim sodostopom) in neposredno modulacijo po razpršenem spektru (“Direct Spread”) (UTRA - prizemni dostop do UMTS)Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancillary equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 301 489-23 Version 1.3.1SIST EN 301 489-23 V1.3.1:2008en01-marec-2008SIST EN 301 489-23 V1.3.1:2008SLOVENSKI
STANDARD



SIST EN 301 489-23 V1.3.1:2008



ETSI EN 301 489-23 V1.3.1 (2007-08)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standardfor radio equipment and services;Part 23: Specific conditions for IMT-2000 CDMADirect Spread (UTRA) Base Station (BS) radio,repeater and ancillary equipment
SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 2
Reference REN/ERM-EMC-258-23 Keywords base station, EMC, IMT-2000, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 3
Contents Intellectual Property Rights.5 Foreword.5 1 Scope.6 2 References.6 3 Definitions and abbreviations.7 3.1 Definitions.7 3.2 Abbreviations.7 4 Test conditions.7 4.1 General.7 4.2 Arrangements for test signals.8 4.2.1 Arrangements for test signals at the input of transmitters.8 4.2.2 Arrangements for test signals at the output of transmitters.8 4.2.3 Arrangements for test signals at the input of receivers.8 4.2.4 Arrangements for test signals at the output of receivers.8 4.2.5 Arrangements for test signals for repeaters.8 4.3 Exclusion bands.8 4.3.1 Transmitter exclusion band.8 4.3.2 Receiver exclusion band.9 4.4 Narrow band responses of receivers.9 4.5 Normal test modulation.9 5 Performance assessment.10 5.1 General.10 5.2 Equipment which can provide a continuous communication link.10 5.2.1 Assessment of BLER in Downlink.10 5.2.2 Assessment of BLER in Uplink.10 5.2.3 Assessment of RF gain variations of repeaters.10 5.3 Equipment which does not provide a continuous communication link.10 5.4 Ancillary equipment.10 5.5 Equipment classification.11 6 Performance criteria.11 6.1 Performance criteria for continuous phenomena applied to Base Stations (BS) and Repeaters.11 6.1.1 Base Stations (BS).11 6.1.2 Repeaters.11 6.2 Performance criteria for transient phenomena for Base Station (BS) and Repeaters.11 6.2.1 Base stations (BS).11 6.2.2 Repeaters.11 6.2.2.1 Repeaters, Performance criteria for voltage dips (> 60 %) and interruptions.11 6.3 Performance criteria for ancillary equipment tested on a stand alone basis.12 6.3.1 Performance criteria for continuous phenomena for ancillary equipment.12 6.3.2 Performance criteria for transient phenomena for ancillary equipment.12 7 Applicability overview tables.12 7.1 Emission.12 7.1.1 General.12 7.1.2 Special conditions.12 7.2 Immunity.13 7.2.1 General.13 7.2.2 Special conditions.13 Annex A (informative): Examples of base station radio equipment for digital cellular radio telecommunications systems within the scope of the present document.14 SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 4
A.1 Base station equipment for IMT-2000 CDMA Direct Spread (UTRA).14 Annex B (informative): The EN title in the official languages.15 Annex C (informative): Bibliography.17 History.18
SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC as amended) and Directive 1999/5/EC [2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 23 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 24 August 2007 Date of latest announcement of this EN (doa): 30 November 2007 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2008 Date of withdrawal of any conflicting National Standard (dow): 31 May 2009
SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 6
1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of "3rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) base station equipment, repeaters and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment (base station (BS), and repeaters) are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria of "3rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) base station radio equipment and associated ancillary equipment. Examples of base station equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. [1] ETSI EN 301 489-1 (V1.6.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements". [2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [3] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [4] ETSI TS 125 141 (V7.5.0): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD)". [5] ETSI TS 125 142 (V7.3.0): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (TDD)". [6] ETSI TS 125 101 (V7.5.0): "Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (FDD)". SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 7
[7] ETSI TS 125 102 (V7.4.0): "Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (TDD)". [8] ETSI TS 125 143 (V7.2.0): "Universal Mobile Telecommunications System (UMTS); UTRA repeater conformance testing". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply: International Mobile Telecommunications-2000 (IMT-2000): third generation mobile systems which provide access, by means of one or more radio links, to a wide range of telecommunications services supported by the fixed telecommunication networks (e.g. PSTN, ISDN, or IP), and to other services which are specific to mobile users signal and control port: port which carries information or control signals, except from antenna and telecommunication ports 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BLER Block Error Ratio BS Base Station CRC Cyclic Redundancy Check EMC ElectroMagnetic Compatibility EUT Equipment Under Test FDD Frequency Division Duplex IMT-2000 International Mobile Telecommunications 2000 Iub Interface between RNC and BS RF Radio Frequency RNC Radio Network Controller TDD Time Division Duplex UARFCN UTRA Absolute Radio Frequency Channel Number UTRA Universal Terrestrial Radio Access 4 Test conditions For the purpose of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate. Further product related test conditions for base station equipment are specified in the present document. 4.1 General The equipment shall be tested in normal test environment defined in the conformance testing specification for base stations TS 125 141 [4] (for FDD) or TS 125 142 [5] (for TDD) or in the UTRA repeater conformance testing specification TS 125 143 [8]. The test conditions shall be recorded in the test report. For emission and immunity tests the test arrangements, etc., as specified in the present document, clauses 4.2 to 4.5, shall apply. For an EUT which contains more than one BS, it is sufficient to perform tests relating to connectors of each representative type of port forming part of the EUT. SIST EN 301 489-23 V1.3.1:2008



ETSI ETSI EN 301 489-23 V1.3.1 (2007-08) 8
4.2 Arrangements for test signals The provisions of EN 301 489-1 [1], clause 4.2 shall apply, with the following modifications. The wanted RF signal nominal frequency shall be selected by setting the UTRA Absolute Radio Frequency Channel Number (UARFCN) to an appropriate number. A communication link shall be set up with a suitable test system capable of evaluating the EUT using the specified performance criteria at the air interface and/or the Iub interface. The test system shall be located outside of the test environment. When the EUT is required to be in the transmit/receive mode, the following conditions shall be met: • the EUT shall be commanded to operate at maximum rated transmit power; • adequate measures shall be taken to avoid the effect of the unwanted signal on the measuring equipment. 4.2.1 Arrangements for test signals at the input of transmitters The provisions of EN 301 489-1 [1], clause 4.2.1 shall apply. 4.2.2 Arrangements for test signals at the output of transmitters The provisions of EN 301 489-1 [1], clause 4.2.2 shall apply. 4.2.3 Arrangements for test signals at the input of receivers The provisions of EN 301 489-1 [1], clause 4.2.3 shall apply with the following modification. The wanted input signal level shall be set to a level where the performance is not limited by the receiver noise floor or strong signal effects e.g. 15 dB above the reference sensitivity level as defined in TS 125 141 [4] (for FDD) or TS 125 142 [5] (for TDD), to provide a stable communication link. 4.2.4 Arrangements for test signals at the output of receivers The provisions of EN 301 489-1 [1], clause 4.2.4 shall apply. 4.2.5 Arrangements for test signals for repeaters For immunity tests of repeaters, the wanted RF input signal shall be coupled to one antenna port at a level which
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.