Fixed Short Range Devices (SRD) in data networks - Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p. - Harmonised Standard for access to the radio spectrum

The present document specifies technical characteristics and methods of measurements for the following types of equipment:
Type 1 equipment: SRDs in data networks:
Type 1a: Terminal nodes
Type 1b: Network nodes
Type 1c: Network access points
Type 1a terminal nodes and type 1b network nodes are fixed SRDs, operating up to 500 mW e.r.p. and with adaptive power control, which are intended to operate in association with other SRDs to form data network topologies supporting the intended application.
Type 1c network access points are specific fixed SRDs, operating up to 500 mW e.r.p. and with adaptive power control, supporting interconnection of a network of SRDs with an external network or service.
These radio equipment types are capable of operating in all or part of the relevant frequency bands given in Table 1.

Naprave kratkega dosega (SRD) v podatkovnih omrežjih - Radijska oprema, ki se uporablja v frekvenčnem območju od 870 MHz do 876 MHz z močnostnimi nivoji do največ 500 mW e.r.p. - Harmonizirani standard za dostop do radijskega spektra

General Information

Status
Published
Public Enquiry End Date
31-Jul-2020
Publication Date
07-Mar-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Mar-2021
Due Date
13-May-2021
Completion Date
08-Mar-2021

Buy Standard

Standard
ETSI EN 303 204 V3.1.1 (2021-03) - Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p.; Harmonised Standard for access to the radio spectrum
English language
120 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
SIST EN 303 204 V3.1.1:2021
English language
120 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 303 204 V3.1.0 (2020-12) - Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p.; Harmonised Standard for access to the radio spectrum
English language
120 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 303 204 V3.0.0 (2020-05) - Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard for access to the radio spectrum
English language
119 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

ETSI EN 303 204 V3.1.1 (2021-03)
HARMONISED EUROPEAN STANDARD
Fixed Short Range Devices (SRD) in data networks;
Radio equipment to be used in the 870 MHz to 876 MHz
frequency range with power levels
ranging up to 500 mW e.r.p.;
Harmonised Standard for access to the radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 303 204 V3.1.1 (2021-03)
Reference
REN/ERM-TG28-555
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 303 204 V3.1.1 (2021-03)
Contents

Intellectual Property Rights .............................................................................................................................. 14

Foreword ........................................................................................................................................................... 14

Modal verbs terminology .................................................................................................................................. 14

Introduction ...................................................................................................................................................... 15

1 Scope ...................................................................................................................................................... 19

2 References .............................................................................................................................................. 20

2.1 Normative references ....................................................................................................................................... 20

2.2 Informative references ...................................................................................................................................... 20

3 Definition of terms, symbols and abbreviations ..................................................................................... 21

3.1 Terms ................................................................................................................................................................ 21

3.2 Symbols ............................................................................................................................................................ 23

3.3 Abbreviations ................................................................................................................................................... 23

4 Technical requirements specifications ................................................................................................... 24

4.1 Environmental profile ....................................................................................................................................... 24

4.2 Conformance requirements .............................................................................................................................. 24

4.2.1 General requirements .................................................................................................................................. 24

4.2.2 Performance criteria .................................................................................................................................... 24

4.2.3 Signal threshold .......................................................................................................................................... 25

4.2.4 Disregard time ............................................................................................................................................ 25

4.2.5 Transmission bandwidth ............................................................................................................................. 25

4.2.6 Fixed frequency operating .......................................................................................................................... 25

4.3 Requirements for transmitters .......................................................................................................................... 25

4.3.1 Frequency drift ............................................................................................................................................ 25

4.3.1.1 Applicability.......................................................................................................................................... 25

4.3.1.2 Description ............................................................................................................................................ 25

4.3.1.3 Limits .................................................................................................................................................... 25

4.3.1.4 Conformance ......................................................................................................................................... 26

4.3.2 Operating frequencies and channel spacing ................................................................................................ 26

4.3.2.1 Applicability.......................................................................................................................................... 26

4.3.2.2 Description ............................................................................................................................................ 26

4.3.2.3 Limits .................................................................................................................................................... 26

4.3.2.4 Conformance ......................................................................................................................................... 27

4.3.3 Effective radiated power ............................................................................................................................. 27

4.3.3.1 Applicability.......................................................................................................................................... 27

4.3.3.2 Description ............................................................................................................................................ 27

4.3.3.3 Limits .................................................................................................................................................... 27

4.3.3.4 Conformance ......................................................................................................................................... 27

4.3.4 Transient power .......................................................................................................................................... 28

4.3.4.1 Applicability.......................................................................................................................................... 28

4.3.4.2 Description ............................................................................................................................................ 28

4.3.4.3 Limits .................................................................................................................................................... 28

4.3.4.4 Conformance ......................................................................................................................................... 28

4.3.5 Occupied bandwidth ................................................................................................................................... 28

4.3.5.1 Applicability.......................................................................................................................................... 28

4.3.5.2 Description ............................................................................................................................................ 28

4.3.5.3 Limits .................................................................................................................................................... 28

4.3.5.4 Conformance ......................................................................................................................................... 29

4.3.6 Unwanted emissions in the out-of-band domain ......................................................................................... 29

4.3.6.1 Applicability.......................................................................................................................................... 29

4.3.6.2 Description ............................................................................................................................................ 29

4.3.6.3 Limits .................................................................................................................................................... 30

4.3.6.4 Conformance ......................................................................................................................................... 30

4.3.7 Unwanted emissions in the spurious domain .............................................................................................. 30

4.3.7.1 Applicability.......................................................................................................................................... 30

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 303 204 V3.1.1 (2021-03)

4.3.7.2 Description ............................................................................................................................................ 31

4.3.7.3 Limits .................................................................................................................................................... 31

4.3.7.4 Conformance ......................................................................................................................................... 31

4.3.8 Frequency stability under low-voltage conditions ...................................................................................... 31

4.3.8.1 Applicability.......................................................................................................................................... 31

4.3.8.2 Description ............................................................................................................................................ 31

4.3.8.3 Limits .................................................................................................................................................... 32

4.3.8.4 Conformance ......................................................................................................................................... 32

4.3.9 Duty cycle and transmission timing ............................................................................................................ 32

4.3.9.1 Applicability.......................................................................................................................................... 32

4.3.9.2 Description ............................................................................................................................................ 32

4.3.9.3 Long term behaviour ............................................................................................................................. 32

4.3.9.4 Short term behaviour ............................................................................................................................. 33

4.3.9.5 Limits .................................................................................................................................................... 33

4.3.9.6 Conformance ......................................................................................................................................... 33

4.3.10 Automatic/adaptive power control .............................................................................................................. 33

4.3.10.1 Applicability.......................................................................................................................................... 33

4.3.10.2 Description ............................................................................................................................................ 33

4.3.10.3 Limits .................................................................................................................................................... 34

4.3.10.4 Conformance ......................................................................................................................................... 34

4.4 Requirements for receivers ............................................................................................................................... 34

4.4.1 Receiver sensitivity ..................................................................................................................................... 34

4.4.1.1 Applicability.......................................................................................................................................... 34

4.4.1.2 Description ............................................................................................................................................ 34

4.4.1.3 Limits .................................................................................................................................................... 34

4.4.1.4 Conformance ......................................................................................................................................... 34

4.4.2 Receiver maximum input signal level ......................................................................................................... 34

4.4.2.1 Applicability.......................................................................................................................................... 34

4.4.2.2 Description ............................................................................................................................................ 35

4.4.2.3 Limits .................................................................................................................................................... 35

4.4.2.4 Conformance ......................................................................................................................................... 35

4.4.3 Clear channel assessment threshold ............................................................................................................ 35

4.4.3.1 Applicability.......................................................................................................................................... 35

4.4.3.2 Description ............................................................................................................................................ 35

4.4.3.3 Limits .................................................................................................................................................... 35

4.4.3.4 Conformance ......................................................................................................................................... 35

4.4.4 Co-channel rejection ................................................................................................................................... 35

4.4.4.1 Applicability.......................................................................................................................................... 35

4.4.4.2 Description ............................................................................................................................................ 35

4.4.4.3 Limits .................................................................................................................................................... 36

4.4.4.4 Conformance ......................................................................................................................................... 36

4.4.5 Adjacent channel selectivity ....................................................................................................................... 36

4.4.5.1 Applicability.......................................................................................................................................... 36

4.4.5.2 Description ............................................................................................................................................ 36

4.4.5.3 Limits .................................................................................................................................................... 36

4.4.5.4 Conformance ......................................................................................................................................... 36

4.4.6 Blocking ...................................................................................................................................................... 36

4.4.6.1 Applicability.......................................................................................................................................... 36

4.4.6.2 Description ............................................................................................................................................ 36

4.4.6.3 Limits .................................................................................................................................................... 37

4.4.6.4 Conformance ......................................................................................................................................... 37

4.4.7 Receiver spurious response rejection .......................................................................................................... 37

4.4.7.1 Applicability.......................................................................................................................................... 37

4.4.7.2 Description ............................................................................................................................................ 37

4.4.7.3 Limits .................................................................................................................................................... 37

4.4.7.4 Conformance ......................................................................................................................................... 37

4.4.8 Receiver intermodulation rejection ............................................................................................................. 37

4.4.8.1 Applicability.......................................................................................................................................... 37

4.4.8.2 Description ............................................................................................................................................ 37

4.4.8.3 Limits .................................................................................................................................................... 38

4.4.8.4 Conformance ......................................................................................................................................... 38

4.4.9 Receiver spurious emissions ....................................................................................................................... 38

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 303 204 V3.1.1 (2021-03)

4.4.9.1 Applicability.......................................................................................................................................... 38

4.4.9.2 Description ............................................................................................................................................ 38

4.4.9.3 Limits .................................................................................................................................................... 38

4.4.9.4 Conformance ......................................................................................................................................... 38

4.5 Requirements for polite spectrum access ......................................................................................................... 38

4.5.1 Listen before talk ........................................................................................................................................ 38

4.5.1.1 Applicability.......................................................................................................................................... 38

4.5.1.2 Description ............................................................................................................................................ 38

4.5.1.3 Limits .................................................................................................................................................... 39

4.5.1.4 Conformance ......................................................................................................................................... 39

4.5.2 Short control signalling transmissions ........................................................................................................ 39

4.5.2.1 Applicability.......................................................................................................................................... 39

4.5.2.2 Description ............................................................................................................................................ 39

4.5.2.3 Limits .................................................................................................................................................... 40

4.5.2.4 Conformance ......................................................................................................................................... 41

4.6 Functional requirements ................................................................................................................................... 41

4.6.1 General considerations ................................................................................................................................ 41

4.6.2 Network access point .................................................................................................................................. 41

4.6.2.1 Applicability.......................................................................................................................................... 41

4.6.2.2 Description ............................................................................................................................................ 41

4.6.2.3 Limits .................................................................................................................................................... 41

4.6.2.4 Conformance ......................................................................................................................................... 41

5 Testing for compliance with technical requirements .............................................................................. 42

5.1 Environmental conditions for testing ............................................................................................................... 42

5.2 General conditions for testing .......................................................................................................................... 42

5.2.1 General considerations ................................................................................................................................ 42

5.2.2 Presentation of equipment for testing purposes .......................................................................................... 42

5.2.2.1 General Considerations ......................................................................................................................... 42

5.2.2.2 Choice of model for testing ................................................................................................................... 42

5.2.2.2.1 General considerations .................................................................................................................... 42

5.2.2.2.2 EUT with an external RF connector ................................................................................................ 42

5.2.2.2.3 EUT without an external RF connector ........................................................................................... 43

5.2.2.3 Testing of modular equipment .............................................................................................................. 43

5.2.2.4 Transmitter shut-off facility .................................................................................................................. 43

5.2.2.5 Battery saving circuit ............................................................................................................................ 43

5.2.2.6 Test power source ................................................................................................................................. 44

5.2.2.6.1 General considerations .................................................................................................................... 44

5.2.2.6.2 External test power source ............................................................................................................... 44

5.2.2.6.3 Internal test power source ................................................................................................................ 44

5.2.3 Normal and extreme test conditions............................................................................................................ 44

5.2.3.1 Normal temperature and humidity ........................................................................................................ 44

5.2.3.2 Extreme temperatures ............................................................................................................................ 44

5.2.3.2.1 Procedure for tests at extreme temperatures .................................................................................... 44

5.2.3.2.2 Procedure for equipment designed for continuous operation .......................................................... 45

5.2.3.2.3 Procedure for equipment designed for intermittent operation ......................................................... 45

5.2.3.2.4 Extreme temperature ranges ............................................................................................................ 45

5.2.3.3 Normal test power source ...................................................................................................................... 45

5.2.3.3.1 Mains voltage .................................................................................................................................. 45

5.2.3.3.2 Regulated lead-acid battery power sources ..................................................................................... 45

5.2.3.3.3 Other power sources ........................................................................................................................ 45

5.2.3.4 Extreme test source voltages ................................................................................................................. 46

5.2.3.4.1 Mains voltage .................................................................................................................................. 46

5.2.3.4.2 Regulated lead-acid battery power sources ........................
...

SLOVENSKI STANDARD
SIST EN 303 204 V3.1.1:2021
01-maj-2021
Naprave kratkega dosega (SRD) v podatkovnih omrežjih - Radijska oprema, ki se
uporablja v frekvenčnem območju od 870 MHz do 876 MHz z močnostnimi nivoji
do največ 500 mW e.r.p. - Harmonizirani standard za dostop do radijskega spektra

Fixed Short Range Devices (SRD) in data networks - Radio equipment to be used in the

870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p. -

Harmonised Standard for access to the radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 204 V3.1.1 (2021-03)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
SIST EN 303 204 V3.1.1:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 303 204 V3.1.1:2021
---------------------- Page: 2 ----------------------
SIST EN 303 204 V3.1.1:2021
ETSI EN 303 204 V3.1.1 (2021-03)
HARMONISED EUROPEAN STANDARD
Fixed Short Range Devices (SRD) in data networks;
Radio equipment to be used in the 870 MHz to 876 MHz
frequency range with power levels
ranging up to 500 mW e.r.p.;
Harmonised Standard for access to the radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 303 204 V3.1.1:2021
2 ETSI EN 303 204 V3.1.1 (2021-03)
Reference
REN/ERM-TG28-555
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 303 204 V3.1.1:2021
3 ETSI EN 303 204 V3.1.1 (2021-03)
Contents

Intellectual Property Rights .............................................................................................................................. 14

Foreword ........................................................................................................................................................... 14

Modal verbs terminology .................................................................................................................................. 14

Introduction ...................................................................................................................................................... 15

1 Scope ...................................................................................................................................................... 19

2 References .............................................................................................................................................. 20

2.1 Normative references ....................................................................................................................................... 20

2.2 Informative references ...................................................................................................................................... 20

3 Definition of terms, symbols and abbreviations ..................................................................................... 21

3.1 Terms ................................................................................................................................................................ 21

3.2 Symbols ............................................................................................................................................................ 23

3.3 Abbreviations ................................................................................................................................................... 23

4 Technical requirements specifications ................................................................................................... 24

4.1 Environmental profile ....................................................................................................................................... 24

4.2 Conformance requirements .............................................................................................................................. 24

4.2.1 General requirements .................................................................................................................................. 24

4.2.2 Performance criteria .................................................................................................................................... 24

4.2.3 Signal threshold .......................................................................................................................................... 25

4.2.4 Disregard time ............................................................................................................................................ 25

4.2.5 Transmission bandwidth ............................................................................................................................. 25

4.2.6 Fixed frequency operating .......................................................................................................................... 25

4.3 Requirements for transmitters .......................................................................................................................... 25

4.3.1 Frequency drift ............................................................................................................................................ 25

4.3.1.1 Applicability.......................................................................................................................................... 25

4.3.1.2 Description ............................................................................................................................................ 25

4.3.1.3 Limits .................................................................................................................................................... 25

4.3.1.4 Conformance ......................................................................................................................................... 26

4.3.2 Operating frequencies and channel spacing ................................................................................................ 26

4.3.2.1 Applicability.......................................................................................................................................... 26

4.3.2.2 Description ............................................................................................................................................ 26

4.3.2.3 Limits .................................................................................................................................................... 26

4.3.2.4 Conformance ......................................................................................................................................... 27

4.3.3 Effective radiated power ............................................................................................................................. 27

4.3.3.1 Applicability.......................................................................................................................................... 27

4.3.3.2 Description ............................................................................................................................................ 27

4.3.3.3 Limits .................................................................................................................................................... 27

4.3.3.4 Conformance ......................................................................................................................................... 27

4.3.4 Transient power .......................................................................................................................................... 28

4.3.4.1 Applicability.......................................................................................................................................... 28

4.3.4.2 Description ............................................................................................................................................ 28

4.3.4.3 Limits .................................................................................................................................................... 28

4.3.4.4 Conformance ......................................................................................................................................... 28

4.3.5 Occupied bandwidth ................................................................................................................................... 28

4.3.5.1 Applicability.......................................................................................................................................... 28

4.3.5.2 Description ............................................................................................................................................ 28

4.3.5.3 Limits .................................................................................................................................................... 28

4.3.5.4 Conformance ......................................................................................................................................... 29

4.3.6 Unwanted emissions in the out-of-band domain ......................................................................................... 29

4.3.6.1 Applicability.......................................................................................................................................... 29

4.3.6.2 Description ............................................................................................................................................ 29

4.3.6.3 Limits .................................................................................................................................................... 30

4.3.6.4 Conformance ......................................................................................................................................... 30

4.3.7 Unwanted emissions in the spurious domain .............................................................................................. 30

4.3.7.1 Applicability.......................................................................................................................................... 30

ETSI
---------------------- Page: 5 ----------------------
SIST EN 303 204 V3.1.1:2021
4 ETSI EN 303 204 V3.1.1 (2021-03)

4.3.7.2 Description ............................................................................................................................................ 31

4.3.7.3 Limits .................................................................................................................................................... 31

4.3.7.4 Conformance ......................................................................................................................................... 31

4.3.8 Frequency stability under low-voltage conditions ...................................................................................... 31

4.3.8.1 Applicability.......................................................................................................................................... 31

4.3.8.2 Description ............................................................................................................................................ 31

4.3.8.3 Limits .................................................................................................................................................... 32

4.3.8.4 Conformance ......................................................................................................................................... 32

4.3.9 Duty cycle and transmission timing ............................................................................................................ 32

4.3.9.1 Applicability.......................................................................................................................................... 32

4.3.9.2 Description ............................................................................................................................................ 32

4.3.9.3 Long term behaviour ............................................................................................................................. 32

4.3.9.4 Short term behaviour ............................................................................................................................. 33

4.3.9.5 Limits .................................................................................................................................................... 33

4.3.9.6 Conformance ......................................................................................................................................... 33

4.3.10 Automatic/adaptive power control .............................................................................................................. 33

4.3.10.1 Applicability.......................................................................................................................................... 33

4.3.10.2 Description ............................................................................................................................................ 33

4.3.10.3 Limits .................................................................................................................................................... 34

4.3.10.4 Conformance ......................................................................................................................................... 34

4.4 Requirements for receivers ............................................................................................................................... 34

4.4.1 Receiver sensitivity ..................................................................................................................................... 34

4.4.1.1 Applicability.......................................................................................................................................... 34

4.4.1.2 Description ............................................................................................................................................ 34

4.4.1.3 Limits .................................................................................................................................................... 34

4.4.1.4 Conformance ......................................................................................................................................... 34

4.4.2 Receiver maximum input signal level ......................................................................................................... 34

4.4.2.1 Applicability.......................................................................................................................................... 34

4.4.2.2 Description ............................................................................................................................................ 35

4.4.2.3 Limits .................................................................................................................................................... 35

4.4.2.4 Conformance ......................................................................................................................................... 35

4.4.3 Clear channel assessment threshold ............................................................................................................ 35

4.4.3.1 Applicability.......................................................................................................................................... 35

4.4.3.2 Description ............................................................................................................................................ 35

4.4.3.3 Limits .................................................................................................................................................... 35

4.4.3.4 Conformance ......................................................................................................................................... 35

4.4.4 Co-channel rejection ................................................................................................................................... 35

4.4.4.1 Applicability.......................................................................................................................................... 35

4.4.4.2 Description ............................................................................................................................................ 35

4.4.4.3 Limits .................................................................................................................................................... 36

4.4.4.4 Conformance ......................................................................................................................................... 36

4.4.5 Adjacent channel selectivity ....................................................................................................................... 36

4.4.5.1 Applicability.......................................................................................................................................... 36

4.4.5.2 Description ............................................................................................................................................ 36

4.4.5.3 Limits .................................................................................................................................................... 36

4.4.5.4 Conformance ......................................................................................................................................... 36

4.4.6 Blocking ...................................................................................................................................................... 36

4.4.6.1 Applicability.......................................................................................................................................... 36

4.4.6.2 Description ............................................................................................................................................ 36

4.4.6.3 Limits .................................................................................................................................................... 37

4.4.6.4 Conformance ......................................................................................................................................... 37

4.4.7 Receiver spurious response rejection .......................................................................................................... 37

4.4.7.1 Applicability.......................................................................................................................................... 37

4.4.7.2 Description ............................................................................................................................................ 37

4.4.7.3 Limits .................................................................................................................................................... 37

4.4.7.4 Conformance ......................................................................................................................................... 37

4.4.8 Receiver intermodulation rejection ............................................................................................................. 37

4.4.8.1 Applicability.......................................................................................................................................... 37

4.4.8.2 Description ............................................................................................................................................ 37

4.4.8.3 Limits .................................................................................................................................................... 38

4.4.8.4 Conformance ......................................................................................................................................... 38

4.4.9 Receiver spurious emissions ....................................................................................................................... 38

ETSI
---------------------- Page: 6 ----------------------
SIST EN 303 204 V3.1.1:2021
5 ETSI EN 303 204 V3.1.1 (2021-03)

4.4.9.1 Applicability.......................................................................................................................................... 38

4.4.9.2 Description ............................................................................................................................................ 38

4.4.9.3 Limits .................................................................................................................................................... 38

4.4.9.4 Conformance ......................................................................................................................................... 38

4.5 Requirements for polite spectrum access ......................................................................................................... 38

4.5.1 Listen before talk ........................................................................................................................................ 38

4.5.1.1 Applicability.......................................................................................................................................... 38

4.5.1.2 Description ............................................................................................................................................ 38

4.5.1.3 Limits .................................................................................................................................................... 39

4.5.1.4 Conformance ......................................................................................................................................... 39

4.5.2 Short control signalling transmissions ........................................................................................................ 39

4.5.2.1 Applicability.......................................................................................................................................... 39

4.5.2.2 Description ............................................................................................................................................ 39

4.5.2.3 Limits .................................................................................................................................................... 40

4.5.2.4 Conformance ......................................................................................................................................... 41

4.6 Functional requirements ................................................................................................................................... 41

4.6.1 General considerations ................................................................................................................................ 41

4.6.2 Network access point .................................................................................................................................. 41

4.6.2.1 Applicability.......................................................................................................................................... 41

4.6.2.2 Description ............................................................................................................................................ 41

4.6.2.3 Limits .................................................................................................................................................... 41

4.6.2.4 Conformance ......................................................................................................................................... 41

5 Testing for compliance with technical requirements .............................................................................. 42

5.1 Environmental conditions for testing ............................................................................................................... 42

5.2 General conditions for testing .......................................................................................................................... 42

5.2.1 General considerations ................................................................................................................................ 42

5.2.2 Presentation of equipment for testing purposes .......................................................................................... 42

5.2.2.1 General Considerations ......................................................................................................................... 42

5.2.2.2 Choice of model for testing ................................................................................................................... 42

5.2.2.2.1 General considerations .................................................................................................................... 42

5.2.2.2.2 EUT with an external RF connector ................................................................................................ 42

5.2.2.2.3 EUT without an external RF connector ........................................................................................... 43

5.2.2.3 Testing of modular equipment .............................................................................................................. 43

5.2.2.4 Transmitter shut-off facility .................................................................................................................. 43

5.2.2.5 Battery saving circuit ............................................................................................................................ 43

5.2.2.6 Test power source ................................................................................................................................. 44

5.2.2.6.1 General considerations .................................................................................................................... 44

5.2.2.6.2 External test power source ............................................................................................................... 44

5.2.2.6.3 Internal test power source ................................................................................................................ 44

5.2.3 Normal and extreme test conditions............................................................................................................ 44

5.2.3.1 Normal temperature and humidity ........................................................................................................ 44

5.2.3.2 Extreme temperatures ............................................................................................................................ 44

5.2.3.2.1 Procedure for tests at extreme temperatures .................................................................................... 44

5.2.3.2.2 Procedure for equipment designed for continuous operation .......................................................... 45

5.2.3.2.3 Procedure for equipment designed for intermittent operation ......................................................... 45

5.2.3.2.4 Extreme temperature ranges .............
...

Final draft ETSI EN 303 204 V3.1.0 (2020-12)
HARMONISED EUROPEAN STANDARD
Fixed Short Range Devices (SRD) in data networks;
Radio equipment to be used in the 870 MHz to 876 MHz
frequency range with power levels
ranging up to 500 mW e.r.p.;
Harmonised Standard for access to the radio spectrum
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 303 204 V3.1.0 (2020-12)
Reference
REN/ERM-TG28-555
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 303 204 V3.1.0 (2020-12)
Contents

Intellectual Property Rights .............................................................................................................................. 14

Foreword ........................................................................................................................................................... 14

Modal verbs terminology .................................................................................................................................. 14

Introduction ...................................................................................................................................................... 15

1 Scope ...................................................................................................................................................... 19

2 References .............................................................................................................................................. 20

2.1 Normative references ....................................................................................................................................... 20

2.2 Informative references ...................................................................................................................................... 20

3 Definition of terms, symbols and abbreviations ..................................................................................... 21

3.1 Terms ................................................................................................................................................................ 21

3.2 Symbols ............................................................................................................................................................ 23

3.3 Abbreviations ................................................................................................................................................... 23

4 Technical requirements specifications ................................................................................................... 24

4.1 Environmental profile ....................................................................................................................................... 24

4.2 Conformance requirements .............................................................................................................................. 24

4.2.1 General requirements .................................................................................................................................. 24

4.2.2 Performance criteria .................................................................................................................................... 24

4.2.3 Signal threshold .......................................................................................................................................... 25

4.2.4 Disregard time ............................................................................................................................................ 25

4.2.5 Transmission bandwidth ............................................................................................................................. 25

4.2.6 Fixed frequency operating .......................................................................................................................... 25

4.3 Requirements for transmitters .......................................................................................................................... 25

4.3.1 Frequency drift ............................................................................................................................................ 25

4.3.1.1 Applicability.......................................................................................................................................... 25

4.3.1.2 Description ............................................................................................................................................ 25

4.3.1.3 Limits .................................................................................................................................................... 25

4.3.1.4 Conformance ......................................................................................................................................... 26

4.3.2 Operating frequencies and channel spacing ................................................................................................ 26

4.3.2.1 Applicability.......................................................................................................................................... 26

4.3.2.2 Description ............................................................................................................................................ 26

4.3.2.3 Limits .................................................................................................................................................... 26

4.3.2.4 Conformance ......................................................................................................................................... 27

4.3.3 Effective radiated power ............................................................................................................................. 27

4.3.3.1 Applicability.......................................................................................................................................... 27

4.3.3.2 Description ............................................................................................................................................ 27

4.3.3.3 Limits .................................................................................................................................................... 27

4.3.3.4 Conformance ......................................................................................................................................... 27

4.3.4 Transient power .......................................................................................................................................... 28

4.3.4.1 Applicability.......................................................................................................................................... 28

4.3.4.2 Description ............................................................................................................................................ 28

4.3.4.3 Limits .................................................................................................................................................... 28

4.3.4.4 Conformance ......................................................................................................................................... 28

4.3.5 Occupied bandwidth ................................................................................................................................... 28

4.3.5.1 Applicability.......................................................................................................................................... 28

4.3.5.2 Description ............................................................................................................................................ 28

4.3.5.3 Limits .................................................................................................................................................... 28

4.3.5.4 Conformance ......................................................................................................................................... 29

4.3.6 Unwanted emissions in the out-of-band domain ......................................................................................... 29

4.3.6.1 Applicability.......................................................................................................................................... 29

4.3.6.2 Description ............................................................................................................................................ 29

4.3.6.3 Limits .................................................................................................................................................... 30

4.3.6.4 Conformance ......................................................................................................................................... 30

4.3.7 Unwanted emissions in the spurious domain .............................................................................................. 30

4.3.7.1 Applicability.......................................................................................................................................... 30

ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 303 204 V3.1.0 (2020-12)

4.3.7.2 Description ............................................................................................................................................ 31

4.3.7.3 Limits .................................................................................................................................................... 31

4.3.7.4 Conformance ......................................................................................................................................... 31

4.3.8 Frequency stability under low-voltage conditions ...................................................................................... 31

4.3.8.1 Applicability.......................................................................................................................................... 31

4.3.8.2 Description ............................................................................................................................................ 31

4.3.8.3 Limits .................................................................................................................................................... 32

4.3.8.4 Conformance ......................................................................................................................................... 32

4.3.9 Duty cycle and transmission timing ............................................................................................................ 32

4.3.9.1 Applicability.......................................................................................................................................... 32

4.3.9.2 Description ............................................................................................................................................ 32

4.3.9.3 Long term behaviour ............................................................................................................................. 32

4.3.9.4 Short term behaviour ............................................................................................................................. 33

4.3.9.5 Limits .................................................................................................................................................... 33

4.3.9.6 Conformance ......................................................................................................................................... 33

4.3.10 Automatic/adaptive power control .............................................................................................................. 33

4.3.10.1 Applicability.......................................................................................................................................... 33

4.3.10.2 Description ............................................................................................................................................ 33

4.3.10.3 Limits .................................................................................................................................................... 34

4.3.10.4 Conformance ......................................................................................................................................... 34

4.4 Requirements for receivers ............................................................................................................................... 34

4.4.1 Receiver sensitivity ..................................................................................................................................... 34

4.4.1.1 Applicability.......................................................................................................................................... 34

4.4.1.2 Description ............................................................................................................................................ 34

4.4.1.3 Limits .................................................................................................................................................... 34

4.4.1.4 Conformance ......................................................................................................................................... 34

4.4.2 Receiver maximum input signal level ......................................................................................................... 34

4.4.2.1 Applicability.......................................................................................................................................... 34

4.4.2.2 Description ............................................................................................................................................ 35

4.4.2.3 Limits .................................................................................................................................................... 35

4.4.2.4 Conformance ......................................................................................................................................... 35

4.4.3 Clear channel assessment threshold ............................................................................................................ 35

4.4.3.1 Applicability.......................................................................................................................................... 35

4.4.3.2 Description ............................................................................................................................................ 35

4.4.3.3 Limits .................................................................................................................................................... 35

4.4.3.4 Conformance ......................................................................................................................................... 35

4.4.4 Co-channel rejection ................................................................................................................................... 35

4.4.4.1 Applicability.......................................................................................................................................... 35

4.4.4.2 Description ............................................................................................................................................ 35

4.4.4.3 Limits .................................................................................................................................................... 36

4.4.4.4 Conformance ......................................................................................................................................... 36

4.4.5 Adjacent channel selectivity ....................................................................................................................... 36

4.4.5.1 Applicability.......................................................................................................................................... 36

4.4.5.2 Description ............................................................................................................................................ 36

4.4.5.3 Limits .................................................................................................................................................... 36

4.4.5.4 Conformance ......................................................................................................................................... 36

4.4.6 Blocking ...................................................................................................................................................... 36

4.4.6.1 Applicability.......................................................................................................................................... 36

4.4.6.2 Description ............................................................................................................................................ 36

4.4.6.3 Limits .................................................................................................................................................... 37

4.4.6.4 Conformance ......................................................................................................................................... 37

4.4.7 Receiver spurious response rejection .......................................................................................................... 37

4.4.7.1 Applicability.......................................................................................................................................... 37

4.4.7.2 Description ............................................................................................................................................ 37

4.4.7.3 Limits .................................................................................................................................................... 37

4.4.7.4 Conformance ......................................................................................................................................... 37

4.4.8 Receiver intermodulation rejection ............................................................................................................. 37

4.4.8.1 Applicability.......................................................................................................................................... 37

4.4.8.2 Description ............................................................................................................................................ 37

4.4.8.3 Limits .................................................................................................................................................... 38

4.4.8.4 Conformance ......................................................................................................................................... 38

4.4.9 Receiver spurious emissions ....................................................................................................................... 38

ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 303 204 V3.1.0 (2020-12)

4.4.9.1 Applicability.......................................................................................................................................... 38

4.4.9.2 Description ............................................................................................................................................ 38

4.4.9.3 Limits .................................................................................................................................................... 38

4.4.9.4 Conformance ......................................................................................................................................... 38

4.5 Requirements for polite spectrum access ......................................................................................................... 38

4.5.1 Listen before talk ........................................................................................................................................ 38

4.5.1.1 Applicability.......................................................................................................................................... 38

4.5.1.2 Description ............................................................................................................................................ 38

4.5.1.3 Limits .................................................................................................................................................... 39

4.5.1.4 Conformance ......................................................................................................................................... 39

4.5.2 Short control signalling transmissions ........................................................................................................ 39

4.5.2.1 Applicability.......................................................................................................................................... 39

4.5.2.2 Description ............................................................................................................................................ 39

4.5.2.3 Limits .................................................................................................................................................... 40

4.5.2.4 Conformance ......................................................................................................................................... 41

4.6 Functional requirements ................................................................................................................................... 41

4.6.1 General considerations ................................................................................................................................ 41

4.6.2 Network access point .................................................................................................................................. 41

4.6.2.1 Applicability.......................................................................................................................................... 41

4.6.2.2 Description ............................................................................................................................................ 41

4.6.2.3 Limits .................................................................................................................................................... 41

4.6.2.4 Conformance ......................................................................................................................................... 41

5 Testing for compliance with technical requirements .............................................................................. 42

5.1 Environmental conditions for testing ............................................................................................................... 42

5.2 General conditions for testing .......................................................................................................................... 42

5.2.1 General considerations ................................................................................................................................ 42

5.2.2 Presentation of equipment for testing purposes .......................................................................................... 42

5.2.2.1 General Considerations ......................................................................................................................... 42

5.2.2.2 Choice of model for testing ................................................................................................................... 42

5.2.2.2.1 General considerations .................................................................................................................... 42

5.2.2.2.2 EUT with an external RF connector ................................................................................................ 42

5.2.2.2.3 EUT without an external RF connector ........................................................................................... 43

5.2.2.3 Testing of modular equipment .............................................................................................................. 43

5.2.2.4 Transmitter shut-off facility .................................................................................................................. 43

5.2.2.5 Battery saving circuit ............................................................................................................................ 43

5.2.2.6 Test power source ................................................................................................................................. 44

5.2.2.6.1 General considerations .................................................................................................................... 44

5.2.2.6.2 External test power source ............................................................................................................... 44

5.2.2.6.3 Internal test power source ................................................................................................................ 44

5.2.3 Normal and extreme test conditions............................................................................................................ 44

5.2.3.1 Normal temperature and humidity ........................................................................................................ 44

5.2.3.2 Extreme temperatures ............................................................................................................................ 44

5.2.3.2.1 Procedure for tests at extreme temperatures .................................................................................... 44

5.2.3.2.2 Procedure for equipment designed for continuous operation .......................................................... 45

5.2.3.2.3 Procedure for equipment designed for intermittent operation ......................................................... 45

5.2.3.2.4 Extreme temperature ranges ............................................................................................................ 45

5.2.3.3 Normal test power source ...................................................................................................................... 45

5.2.3.3.1 Mains voltage .................................................................................................................................. 45

5.2.3.3.2 Regulated lead-acid battery power sources ..................................................................................... 45

5.2.3.3.3 Other power sources ........................................................................................................................ 45

5.2.3.4 Extreme test source voltages ................................................................................................................. 46

5.2.3.4.1 Mains voltage .................................................................................................................................. 46

5.2.3.4.2 Regulated
...

Draft ETSI EN 303 204 V3.0.0 (2020-05)
HARMONISED EUROPEAN STANDARD
Fixed Short Range Devices (SRD) in data networks;
Radio equipment to be used in the 870 MHz to 876 MHz
frequency range with power levels ranging up to 500 mW;
Harmonised Standard for access to the radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 204 V3.0.0 (2020-05)
Reference
REN/ERM-TG28-555
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 204 V3.0.0 (2020-05)
Contents

Intellectual Property Rights .............................................................................................................................. 14

Foreword ........................................................................................................................................................... 14

Modal verbs terminology .................................................................................................................................. 14

Introduction ...................................................................................................................................................... 15

1 Scope ...................................................................................................................................................... 19

2 References .............................................................................................................................................. 20

2.1 Normative references ....................................................................................................................................... 20

2.2 Informative references ...................................................................................................................................... 20

3 Definition of terms, symbols and abbreviations ..................................................................................... 21

3.1 Terms ................................................................................................................................................................ 21

3.2 Symbols ............................................................................................................................................................ 23

3.3 Abbreviations ................................................................................................................................................... 23

4 Technical requirements specifications ................................................................................................... 24

4.1 Environmental profile ....................................................................................................................................... 24

4.2 Conformance requirements .............................................................................................................................. 24

4.2.1 General requirements .................................................................................................................................. 24

4.2.2 Performance criteria .................................................................................................................................... 24

4.2.3 Signal threshold .......................................................................................................................................... 25

4.2.4 Disregard time ............................................................................................................................................ 25

4.2.5 Transmission bandwidth ............................................................................................................................. 25

4.2.6 Fixed frequency operating .......................................................................................................................... 25

4.3 Requirements for transmitters .......................................................................................................................... 25

4.3.1 Frequency drift ............................................................................................................................................ 25

4.3.1.1 Applicability.......................................................................................................................................... 25

4.3.1.2 Description ............................................................................................................................................ 25

4.3.1.3 Limits .................................................................................................................................................... 25

4.3.1.4 Conformance ......................................................................................................................................... 26

4.3.2 Operating frequencies and channel spacing ................................................................................................ 26

4.3.2.1 Applicability.......................................................................................................................................... 26

4.3.2.2 Description ............................................................................................................................................ 26

4.3.2.3 Limits .................................................................................................................................................... 26

4.3.2.4 Conformance ......................................................................................................................................... 27

4.3.3 Effective radiated power ............................................................................................................................. 27

4.3.3.1 Applicability.......................................................................................................................................... 27

4.3.3.2 Description ............................................................................................................................................ 27

4.3.3.3 Limits .................................................................................................................................................... 27

4.3.3.4 Conformance ......................................................................................................................................... 27

4.3.4 Transient power .......................................................................................................................................... 27

4.3.4.1 Applicability.......................................................................................................................................... 27

4.3.4.2 Description ............................................................................................................................................ 28

4.3.4.3 Limits .................................................................................................................................................... 28

4.3.4.4 Conformance ......................................................................................................................................... 28

4.3.5 Occupied bandwidth ................................................................................................................................... 28

4.3.5.1 Applicability.......................................................................................................................................... 28

4.3.5.2 Description ............................................................................................................................................ 28

4.3.5.3 Limits .................................................................................................................................................... 28

4.3.5.4 Conformance ......................................................................................................................................... 29

4.3.6 Unwanted emissions in the out-of-band domain ......................................................................................... 29

4.3.6.1 Applicability.......................................................................................................................................... 29

4.3.6.2 Description ............................................................................................................................................ 29

4.3.6.3 Limits .................................................................................................................................................... 30

4.3.6.4 Conformance ......................................................................................................................................... 30

4.3.7 Unwanted emissions in the spurious domain .............................................................................................. 30

4.3.7.1 Applicability.......................................................................................................................................... 30

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 204 V3.0.0 (2020-05)

4.3.7.2 Description ............................................................................................................................................ 31

4.3.7.3 Limits .................................................................................................................................................... 31

4.3.7.4 Conformance ......................................................................................................................................... 31

4.3.8 Frequency stability under low-voltage conditions ...................................................................................... 31

4.3.8.1 Applicability.......................................................................................................................................... 31

4.3.8.2 Description ............................................................................................................................................ 31

4.3.8.3 Limits .................................................................................................................................................... 32

4.3.8.4 Conformance ......................................................................................................................................... 32

4.3.9 Duty cycle and transmission timing ............................................................................................................ 32

4.3.9.1 Applicability.......................................................................................................................................... 32

4.3.9.2 Description ............................................................................................................................................ 32

4.3.9.3 Long term behaviour ............................................................................................................................. 32

4.3.9.4 Short term behaviour ............................................................................................................................. 33

4.3.9.5 Limits .................................................................................................................................................... 33

4.3.9.6 Conformance ......................................................................................................................................... 33

4.3.10 Automatic/adaptive power control .............................................................................................................. 33

4.3.10.1 Applicability.......................................................................................................................................... 33

4.3.10.2 Description ............................................................................................................................................ 33

4.3.10.3 Limits .................................................................................................................................................... 34

4.3.10.4 Conformance ......................................................................................................................................... 34

4.4 Requirements for receivers ............................................................................................................................... 34

4.4.1 Receiver sensitivity ..................................................................................................................................... 34

4.4.1.1 Applicability.......................................................................................................................................... 34

4.4.1.2 Description ............................................................................................................................................ 34

4.4.1.3 Limits .................................................................................................................................................... 34

4.4.1.4 Conformance ......................................................................................................................................... 34

4.4.2 Receiver maximum input signal level ......................................................................................................... 34

4.4.2.1 Applicability.......................................................................................................................................... 34

4.4.2.2 Description ............................................................................................................................................ 35

4.4.2.3 Limits .................................................................................................................................................... 35

4.4.2.4 Conformance ......................................................................................................................................... 35

4.4.3 Clear channel assessment threshold ............................................................................................................ 35

4.4.3.1 Applicability.......................................................................................................................................... 35

4.4.3.2 Description ............................................................................................................................................ 35

4.4.3.3 Limits .................................................................................................................................................... 35

4.4.3.4 Conformance ......................................................................................................................................... 35

4.4.4 Co-channel rejection ................................................................................................................................... 35

4.4.4.1 Applicability.......................................................................................................................................... 35

4.4.4.2 Description ............................................................................................................................................ 35

4.4.4.3 Limits .................................................................................................................................................... 36

4.4.4.4 Conformance ......................................................................................................................................... 36

4.4.5 Adjacent channel selectivity ....................................................................................................................... 36

4.4.5.1 Applicability.......................................................................................................................................... 36

4.4.5.2 Description ............................................................................................................................................ 36

4.4.5.3 Limits .................................................................................................................................................... 36

4.4.5.4 Conformance ......................................................................................................................................... 36

4.4.6 Blocking ...................................................................................................................................................... 36

4.4.6.1 Applicability.......................................................................................................................................... 36

4.4.6.2 Description ............................................................................................................................................ 36

4.4.6.3 Limits .................................................................................................................................................... 37

4.4.6.4 Conformance ......................................................................................................................................... 37

4.4.7 Receiver spurious response rejection .......................................................................................................... 37

4.4.7.1 Applicability.......................................................................................................................................... 37

4.4.7.2 Description ............................................................................................................................................ 37

4.4.7.3 Limits .................................................................................................................................................... 37

4.4.7.4 Conformance ......................................................................................................................................... 37

4.4.8 Receiver intermodulation rejection ............................................................................................................. 37

4.4.8.1 Applicability.......................................................................................................................................... 37

4.4.8.2 Description ............................................................................................................................................ 37

4.4.8.3 Limits .................................................................................................................................................... 38

4.4.8.4 Conformance ......................................................................................................................................... 38

4.4.9 Receiver spurious emissions ....................................................................................................................... 38

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 204 V3.0.0 (2020-05)

4.4.9.1 Applicability.......................................................................................................................................... 38

4.4.9.2 Description ............................................................................................................................................ 38

4.4.9.3 Limits .................................................................................................................................................... 38

4.4.9.4 Conformance ......................................................................................................................................... 38

4.5 Requirements for polite spectrum access ......................................................................................................... 38

4.5.1 Listen before talk ........................................................................................................................................ 38

4.5.1.1 Applicability.......................................................................................................................................... 38

4.5.1.2 Description ............................................................................................................................................ 38

4.5.1.3 Limits .................................................................................................................................................... 39

4.5.1.4 Conformance ......................................................................................................................................... 39

4.5.2 Short control signalling transmissions ........................................................................................................ 39

4.5.2.1 Applicability.......................................................................................................................................... 39

4.5.2.2 Description ............................................................................................................................................ 39

4.5.2.3 Limits .................................................................................................................................................... 40

4.5.2.4 Conformance ......................................................................................................................................... 41

4.6 Functional requirements ................................................................................................................................... 41

4.6.1 General considerations ................................................................................................................................ 41

4.6.2 Network access point .................................................................................................................................. 41

4.6.2.1 Applicability.......................................................................................................................................... 41

4.6.2.2 Description ............................................................................................................................................ 41

4.6.2.3 Limits .................................................................................................................................................... 41

4.6.2.4 Conformance ......................................................................................................................................... 41

5 Testing for compliance with technical requirements .............................................................................. 42

5.1 Environmental conditions for testing ............................................................................................................... 42

5.2 General conditions for testing .......................................................................................................................... 42

5.2.1 General considerations ................................................................................................................................ 42

5.2.2 Presentation of equipment for testing purposes .......................................................................................... 42

5.2.2.1 General Considerations ......................................................................................................................... 42

5.2.2.2 Choice of model for testing ................................................................................................................... 42

5.2.2.2.1 General considerations .................................................................................................................... 42

5.2.2.2.2 EUT with an external RF connector ................................................................................................ 42

5.2.2.2.3 EUT without an external RF connector ........................................................................................... 43

5.2.2.3 Testing of modular equipment .............................................................................................................. 43

5.2.2.4 Transmitter shut-off facility .................................................................................................................. 43

5.2.2.5 Battery saving circuit ............................................................................................................................ 43

5.2.2.6 Test power source ................................................................................................................................. 44

5.2.2.6.1 General considerations .................................................................................................................... 44

5.2.2.6.2 External test power source ............................................................................................................... 44

5.2.2.6.3 Internal test power source ................................................................................................................ 44

5.2.3 Normal and extreme test conditions............................................................................................................ 44

5.2.3.1 Normal temperature and humidity ........................................................................................................ 44

5.2.3.2 Extreme temperatures ............................................................................................................................ 44

5.2.3.2.1 Procedure for tests at extreme temperatures .................................................................................... 44

5.2.3.2.2 Procedure for equipment designed for continuous operation .......................................................... 45

5.2.3.2.3 Procedure for equipment designed for intermittent operation ......................................................... 45

5.2.3.2.4 Extreme temperature ranges ............................................................................................................ 45

5.2.3.3 Normal test power source ...................................................................................................................... 45

5.2.3.3.1 Mains voltage .................................................................................................................................. 45

5.2.3.3.2 Regulated lead-acid battery power sources ..................................................................................... 45

5.2.3.3.3 Other power sources ........................................................................................................................ 46

5.2.3.4 Extreme test source voltages ................................................................................................................. 46

5.2.3.4.1 Mains voltage .................................................................................................................................. 46

5.2.3.4.2 Regulated lead-acid battery power sources ..
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.