SIST EN 4531-101:2012
(Main)Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
This European Standard defines the performance and dimensions of optical PC profiled contact for 62,5 μm/125 μm fibre and (1,8 ± 0,1) mm diameter cable EN 4641-100.
Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für EN 4641-100 Lichtwellenleiterkabel - 55 °C bis 125 °C - Produktnorm
Diese Europäische Norm legt die Leistungsdaten und Maße von optischen Kontakten mit PC-Profil für Kabel nach EN 4641-100 mit Fasern von 62,5 µm/125 µm und einem Durchmesser von (1,8 +/- 0,1) mm fest.
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée - Contacts affleurants - Partie 101 : Contact optique pour câble EN 4641-100 - 55 °C à 125 °C - Norme de produit
La présente Norme Européenne définit la performance et les dimensions des contacts à profils optiques pour un câble EN 4641-100 de diamètre (1,8 +/- 0,1) mm et une fibre de 62,5 µm/125 µm.
Aeronavtika - Konektorji, optični, okrogli, z enim ali več zatiči, priključeni z navojnim obročkom - Izravnani kontakti - 101. del: Optični kontakt za kabel EN 4641-100 - 55 °C do 125 °C - Standard za izdelek
Ta evropski standard določa lastnosti in mere optičnega kontakta s fizičnim stikom za vlakna 62,5 μm/125 μm in kable EN 4641-100 s premerom (1,8 ± 0,1) mm.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für EN 4641-100 Lichtwellenleiterkabel - 55 °C bis 125 °C - ProduktnormSérie aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée - Contacts affleurants - Partie 101 : Contact optique pour câble EN 4641-100 - 55 °C à 125 °C - Norme de produitAerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4531-101:2012SIST EN 4531-101:2012en01-september-2012SIST EN 4531-101:2012SLOVENSKI
STANDARDSIST EN 4531-101:20091DGRPHãþD
SIST EN 4531-101:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4531-101
May 2012 ICS 49.060 Supersedes EN 4531-101:2007English Version
Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125 °C - Product standard
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée à trois filets - Contacts affleurants - Partie 101 : Contact optique pour câble EN 4641-100 - 55 °C à 125 °C - Norme de produit
Luft- und Raumfahrt - Optische Rundsteckverbinder mit dreigängiger Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für Kabel nach EN 4641-100, - 55 °C bis 125 °C - Produktnorm This European Standard was approved by CEN on 10 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4531-101:2012: ESIST EN 4531-101:2012
EN 4531-101:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Termini dimensions .44General dimensions of the optical termini .65Material .86Technical specification .87Tests according to EN 2591-100 .88Cleaning instructions . 109Tooling . 1010Termination instructions . 1111Designation . 11Bibliography . 12 SIST EN 4531-101:2012
EN 4531-101:2012 (E) 3 Foreword This document (EN 4531-101:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4531-101:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4531-101:2012
EN 4531-101:2012 (E) 4 1 Scope This European Standard defines the performance and dimensions of optical PC profiled contact for 62,5 µm/125 µm fibre and (1,8 ± 0,1) mm diameter cable EN 4641-100. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.