Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998)

This part of ISO 4157 specifies requirements for designation systems and a designation code for buildings, including spaces, building elements and components.

Zeichnungen für das Bauwesen - Bezeichnungssysteme - Teil 1: Gebäude und Gebäudeteile (ISO 4157-1:1998)

Dieser Teil der ISO 4157 legt Anforderungen an Bezeichnugnssysteme sowie einen Kennzeichnungsschlüssel für Gebäude, einschließlich Räumen, Gebäudeelementen und Gebäudeteilen fest.

Dessins de bâtiment - Systemes de désignation - Partie 1: Bâtiments et parties de bâtiments (ISO 4157-1:1998)

La présente partie de l'ISO 4157 spécifie les exigences concernant les systèmes de désignation et un code de désignation pour les bâtiments, y compris les espaces, les éléments de bâtiment et les éléments constitutifs.

Gradbeniške risbe - Sistemi označevanja - 1. del: Stavbe in deli stavb (ISO 4157-1:1998)

General Information

Status
Published
Publication Date
31-Jan-2002
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2002
Due Date
01-Feb-2002
Completion Date
01-Feb-2002

Buy Standard

Standard
EN ISO 4157-1:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4157-1:2002
01-februar-2002
*UDGEHQLãNHULVEH6LVWHPLR]QDþHYDQMDGHO6WDYEHLQGHOLVWDYE ,62

Construction drawings - Designation systems - Part 1: Buildings and parts of buildings
(ISO 4157-1:1998)
Zeichnungen für das Bauwesen - Bezeichnungssysteme - Teil 1: Gebäude und
Gebäudeteile (ISO 4157-1:1998)
Dessins de bâtiment - Systemes de désignation - Partie 1: Bâtiments et parties de
bâtiments (ISO 4157-1:1998)
Ta slovenski standard je istoveten z: EN ISO 4157-1:1998
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
SIST EN ISO 4157-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4157-1:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 4157-1:2002

---------------------- Page: 3 ----------------------

SIST EN ISO 4157-1:2002

---------------------- Page: 4 ----------------------

SIST EN ISO 4157-1:2002
INTERNATIONAL ISO
STANDARD 4157-1
Second edition
1998-12-01
Construction drawings — Designation
systems —
Part 1:
Buildings and parts of buildings
Dessins de bâtiment — Systèmes de désignation —
Partie 1: Bâtiments et parties de bâtiments
A
Reference number
ISO 4157-1:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 4157-1:2002
ISO 4157-1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 4157-1 was prepared by Technical Committee ISO/TC 10, Technical drawings, product
definition and related documentation, Subcommittee SC 8, Construction documentation.
This second edition cancels and replaces the first edition (ISO 4157-1:1980), which has been technically revised.
ISO 4157 consists of the following parts, under the general title Construction drawings — Designation systems:
— Part 1: Buildings and parts of buildings
— Part 2: Room names and numbers
— Part 3: Room identifiers
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 4157-1:2002
INTERNATIONAL STANDARD  © ISO ISO 4157-1:1998(E)
Construction drawings — Designation systems —
Part 1:
Buildings and parts of buildings
1 Scope
This part of ISO 4157 specifies requirements for designation systems and a designation code for buildings,
including spaces, building elements and components.
2 Normative references
The following standards contain provisions, which through reference in this text, constitute provisions of this part of
ISO 4157. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this part of ISO 4157 are encouraged to investigate the possibility of applying the
most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid
International Standards.
ISO 4157-2:1998, Construction drawings — Designation systems — Part 2: Room names and numbers.
ISO 4157-3:1998, Construction drawings — Designation systems — Part 3: Room identifiers.
3 Definitions
For the purposes of this part of ISO 4157, the following definitions apply.
3.1
room
area or volume, space or void bounded actually or theoretically, even though it is not traditionally thought of as a
room
EXAMPLES
Balcony in a movie theatre

 Staircase (considered to be a separate room in each floor)
 Auditorium with folding doors
 Partly covered terrace
 Atrium (even without a roof)
 Ventilation shafts (considered to be a separate room on each floor)
 Elevator shafts (considered to be a separate room on each floor)
 Void in ceiling
NOTE A room in the numbering context may or may not be completely enclosed by walls, ceiling, and floor. However, for a
room to be allocated a room number, it should have some of these physical limitations.
1

---------------------- Page: 7 ----------------------

SIST EN ISO 4157-1:2002
© ISO
ISO 4157-1:1998(E)
3.2
room name
common or given name which represents the intended use or function of the room
NOTES
1  Rooms in the same building may have identical room names, e.g. CLASSROOM. It is not necessary to differentiate them,
e.g. CLASSROOM A, CLASSROOM B, etc.
2  Additions to room names such as B and 3, as in CLASSROOM B, BEDROOM 3, should only be assigned to room names if
they are so called in the practical use of the building. Given names like CHOPIN or TAYLOR should in such instances be
preferred, e.g. CHOPIN AUDITORIUM, TAYLOR SUITE, etc., for their mnemonic value.
3.3
room number
number allocated to a room
NOTES
1  See 3.1.
2  Room number in the traditional sense is reserved for the practical use of a building, i.e. the interface between building and
human beings. Room numbers may be revised by thorough reallocation when important changes are made, such as
remodelling, extensions, or new ownership. The time for the changeover an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.