SIST EN IEC 62769-2:2023
(Main)Field Device Integration (FDI®) - Part 2: Client (IEC 62769-2:2023)
Field Device Integration (FDI®) - Part 2: Client (IEC 62769-2:2023)
This part of IEC 62769 specifies the FDI ® 1 Client. See Annex C for some typical FDI ® Client use
cases.
Feldgeräteintegration (FDI®) - Teil 2: FDI-Client (IEC 62769-2:2023)
Intégration des appareils de terrain (FDI®) - Partie 2: Client (IEC 62769-2:2023)
IEC 62769-2:2023 est disponible sous forme de IEC 62769-2:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 62769-2:2023 spécifie le Client FDI®[1]. Voir l'Annexe C pour certains cas d'utilisation types du Client FDI®. L'architecture FDI® complète est représentée à la Figure 1. Les composants architecturaux qui relèvent du domaine d'application du présent document ont été mis en évidence dans Figure 1.
[1] FDI® est une marque déposée de l’organisation à but non lucratif Fieldbus Foundation, Inc. Cette information est donnée à l'intention des utilisateurs du présent document et ne signifie nullement que l'IEC approuve le détenteur de la marque ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de la marque. L'utilisation de la marque exige l'autorisation du détenteur de la marque.
Integracija procesne naprave (FDI®) - 2. del: Odjemalec FDI (IEC 62769-2:2023)
Ta del standarda IEC 62769 določa odjemalca FDI® 1. Za nekatere tipične primere uporabe odjemalca FDI® glej dodatek C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62769-2:2023
01-november-2023
Integracija procesne naprave (FDI®) - 2. del: Odjemalec FDI (IEC 62769-2:2023)
Field Device Integration (FDI®) - Part 2: Client (IEC 62769-2:2023)
Feldgeräteintegration (FDI®) - Teil 2: FDI-Client (IEC 62769-2:2023)
Intégration des appareils de terrain (FDI®) - Partie 2: Client (IEC 62769-2:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-2:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62769-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62769-2:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62769-2:2023
EUROPEAN STANDARD EN IEC 62769-2
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 25.040.40; 35.100.05 Supersedes EN IEC 62769-2:2021
English Version
Field Device Integration (FDI®) - Part 2: Client
(IEC 62769-2:2023)
Intégration des appareils de terrain (FDI®) - Partie 2: Client Feldgeräteintegration (FDI®) - Teil 2: FDI-Client
(IEC 62769-2:2023) (IEC 62769-2:2023)
This European Standard was approved by CENELEC on 2023-05-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-2:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62769-2:2023
EN IEC 62769-2:2023 (E)
European foreword
The text of document 65E/855/CDV, future edition 3 of IEC 62769-2, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62769-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-09
document have to be withdrawn
This document supersedes EN IEC 62769-2:2021 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-2:2023 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62769-2:2023
EN IEC 62769-2:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex
...
SLOVENSKI STANDARD
oSIST prEN IEC 62769-2:2022
01-maj-2022
Integracija procesne naprave (FDI) - 2. del: Odjemalec FDI
Field Device Integration (FDI) - Part 2: FDI Client
Feldgeräteintegration (FDI) - Teil 2: FDI-Client
Intégration des appareils de terrain (FDI) - Partie 2: Client FDI
Ta slovenski standard je istoveten z: prEN IEC 62769-2:2022
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
oSIST prEN IEC 62769-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62769-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62769-2:2022
65E/855/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62769-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-03-04 2022-05-27
SUPERSEDES DOCUMENTS:
65E/822/RR
IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 65B,SC 65C
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Field Device Integration (FDI) - Part 2: FDI Client
PROPOSED STABILITY DATE: 2025
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62769-2:2022
65E/855/CDV – 2 – IEC CDV 62769-2 © IEC:2022
NOTE FROM TC/SC OFFICERS:
---------------------- Page: 4 ----------------------
oSIST prEN IEC 62769-2:2022
IEC CDV 62769-2 © IEC:2022 – 3 – 65E/855/CDV
1 CONTENTS
2
3 FOREWORD . 12
4 1 Scope . 14
5 2 Normative references . 14
6 3 Terms, definitions, abbreviated terms, acronyms and conventions . 15
7 3.1 Terms and definitions . 15
8 3.1.1 Terms used for Services . 15
9 3.1.2 Terms used for Device Access Services . 16
10 3.2 Abbreviated terms and acronyms . 16
11 3.3 Conventions . 16
12 4 Overview . 16
13 5 FDI Client . 18
14 5.1 Device Access Services . 18
15 5.1.1 General . 18
16 5.1.2 Device Model . 18
17 5.1.3 Node model . 20
18 5.1.4 Services . 25
19 5.1.5 Base Property Services .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.