Industrial networks - Profiles - Part 1-1: Fieldbus profiles - Communication Profile Family 1 (IEC 61784-1-1:2023)

IEC 61784-1-1:2023 defines Communication Profile Family 1 (CPF 1). CPF 1 specifies a set of protocol specific communication profiles (CPs) based on the IEC 61158 series (Type 1, Type 5 and Type 9) and other standards, to be used in the design of devices involved in communications in factory manufacturing and process control.
NOTE All CPs are based on standards or draft standards or International Standards published by the IEC or on standards or International Standards established by other standards bodies or open standards processes.
Each CP selects an appropriate consistent and compatible subset of services and protocols from the relevant set that is defined and modelled in the IEC 61158 series. For the selected subset of services and protocols, the profile also describes any possible or necessary constraints in parameter values.

Industrielle Kommunikationsnetze - Profile - Teil 1-1: Feldbusprofile - Kommunikationsprofilfamilie (CPF) 1 (IEC 61784-1-1:2023)

Réseaux industriels - Profils - Partie 1-1: Profils de bus de terrain - Famille de profils de communication 1 (IEC 61784-1-1:2023)

L’IEC 61784-1-1:2023 définit la famille de profils de communication 1 (CPF 1). La CPF 1 définit un jeu de profils de communication (CP) spécifiques au protocole, fondé sur la série IEC 61158 (Type 1, Type 5 et Type 9) et d’autres normes, à utiliser pour la conception d’appareils employés en communication dans le cadre de la production industrielle et de la commande de processus.
NOTE Tous les CP sont fondés sur des normes, des projets de normes ou des Normes internationales publiées par l’IEC, ou bien sur des normes ou des Normes internationales établies par d’autres organismes de normalisation, ou encore sur des processus de normes ouvertes.
Chaque CP sélectionne un sous-ensemble de services et de protocoles approprié, cohérent et compatible, à partir de l’ensemble du jeu pertinent défini et modélisé dans la série IEC 61158. Le profil décrit également, pour le sous-ensemble sélectionné de services et de protocoles, toute contrainte possible ou nécessaire au niveau des valeurs des paramètres.

Industrijska omrežja - Profili - 1-1. del: Profili procesnih vodil - Komunikacijski profil skupine 1 (IEC 61784-1-1:2023)

Standard IEC 61784-1-1:2023 določa družino komunikacijskih profilov 1 (CPF 1). Družina komunikacijskih profilov 1 določa sklop komunikacijskih profilov (CP), specifičnih za protokol, na osnovi skupine standardov IEC 61158 (tip 1, tip 5 in tip 9) in drugih standardov, za uporabo pri oblikovanju naprav, vključenih v postopkih komunikacije v tovarniški proizvodnji in kontroli procesa.
OPOMBA: Vsi komunikacijski profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavila komisija IEC, oziroma na standardih ali mednarodnih standardih, ki so jih določili drugi organi za standarde ali procesi odprtih standardov.
Vsak komunikacijski profil izbere skladno in združljivo podskupino opravil ter protokolov iz ustreznega sklopa, ki je definiran in modeliran v skupini standardov IEC 61158. Za izbrane podskupine opravil in protokolov profil opisuje tudi morebitne potrebne ali nujne omejitve vrednosti parametrov.

General Information

Status
Published
Publication Date
09-Oct-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Jul-2023
Due Date
08-Sep-2023
Completion Date
10-Oct-2023

Relations

Buy Standard

Standard
EN IEC 61784-1-1:2023
English language
109 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61784-1-1:2023
01-november-2023
Industrijska omrežja - Profili - 1-1. del: Profili procesnih vodil - Komunikacijski
profil skupine 1 (IEC 61784-1-1:2023)
Industrial networks - Profiles - Part 1-1: Fieldbus profiles - Communication Profile Family
1 (IEC 61784-1-1:2023)
Industrielle Kommunikationsnetze - Profile - Teil 1-1: Feldbusprofile -
Kommunikationsprofilfamilie (CPF) 1 (IEC 61784-1-1:2023)
Réseaux industriels - Profils - Partie 1-1: Profils de bus de terrain - Famille de profils de
communication 1 (IEC 61784-1-1:2023)
Ta slovenski standard je istoveten z: EN IEC 61784-1-1:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
SIST EN IEC 61784-1-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61784-1-1:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 61784-1-1:2023


EUROPEAN STANDARD EN IEC 61784-1-1

NORME EUROPÉENNE

EUROPÄISCHE NORM April 2023
ICS 35.100.20; 35.240.50 Supersedes EN IEC 61784-1:2019 (partially)
English Version
Industrial networks - Profiles - Part 1-1: Fieldbus profiles -
Communication Profile Family 1
(IEC 61784-1-1:2023)
Réseaux industriels - Profils - Partie 1-1: Profils de bus de Industrielle Kommunikationsnetze - Profile - Teil 1-1:
terrain - Famille de profils de communication 1 Feldbusprofile - Kommunikationsprofilfamilie (CPF) 1
(IEC 61784-1-1:2023) (IEC 61784-1-1:2023)
This European Standard was approved by CENELEC on 2023-04-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61784-1-1:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61784-1-1:2023
EN IEC 61784-1-1:2023 (E)
European foreword
The text of document 65C/1207/FDIS, future edition 1 of IEC 61784-1-1, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-1-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-26
document have to be withdrawn

This document, together with other parts of the same series, partially supersedes EN IEC 61784-
1:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-1-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60079-14 NOTE Approved as EN 60079-14
IEC 60793 (series) NOTE Approved as EN IEC 60793 (series)
IEC 61158-1 NOTE Approved as EN IEC 61158-1
IEC 61158-3 (series) NOTE Approved as EN 61158-3 (series)
IEC 61158-4 (series) NOTE Approved as EN 6115
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.