SIST EN 60384-4-2:2008

Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level EZ

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications, the contents of 1.4 of the sectional specification shall be taken into account.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4-2: Vordruck für Bauartspezifikation: Aluminium-Elektrolyt-Kondensatoren mit festem (MnO2) Elektrolyten - Bewertungsstufe EZ

Condensateurs fixes utilisés dans les équipements électroniques - Partie 4-2: Spécification particulière cadre - Condensateurs fixes électrolytiques en aluminium à électrolyte solide (MnO2) - Niveau d'assurance de la qualité EZ

La CEI 60834-4-2:2007 est une spécification particulière cadre et est un document annexe à la spécification intermédiaire qui contient des exigences pour le modèle, la disposition et le contenu minimum des spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent pas être décrites comme telles. Cette seconde édition annule et remplace la première édition publiée en 1985, ainsi que son amendement 1 (1992) et son amendement 2 (1996). Cette édition constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue, publiée en 2008, correspond à la version anglaise.

Fiksni kondenzatorji za uporabo v elektronski opremi - 4. del: Okvirna podrobna specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdim elektrolitom (MnO2) – Ocenjevalni nivo EZ (IEC 60384-4-2:2007)

General Information

• Status: Published
• Publication Date: 05-Nov-2007
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Oct-2007
• Due Date: 29-Dec-2007
• Completion Date: 06-Nov-2007
• Ref Project: EN 60384-4-2:2007 - Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level EZ

Relations

• Replaces: SIST EN 130301:2003 - Blank Detail Specification: Aluminium electrolytic capacitors with non-solid electrolyte
• Effective Date: 29-Jan-2023
• Revised: SIST EN 130301:2003 - Blank Detail Specification: Aluminium electrolytic capacitors with non-solid electrolyte
• Effective Date: 13-May-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60384-4-2:2008
01-januar-2008
Fiksni kondenzatorji za uporabo v elektronski opremi - 4. del: Okvirna podrobna
specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdim elektrolitom
(MnO2) – Ocenjevalni nivo EZ (IEC 60384-4-2:2007)
Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification -
Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level
EZ (IEC 60384-4-2:2007)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4-2: Vordruck für
Bauartspezifikation: Aluminium-Elektrolyt-Kondensatoren mit festem (MnO2) Elektrolyten
- Bewertungsstufe EZ (IEC 60384-4-2:2007)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 4-2:
Spécification particuliere cadre - Condensateurs fixes électrolytiques en aluminium a
électrolyte solide (MnO2) - Niveau d'assurance de la qualité EZ (IEC 60384-4-2:2007)
Ta slovenski standard je istoveten z: EN 60384-4-2:2007
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
SIST EN 60384-4-2:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60384-4-2

NORME EUROPÉENNE
May 2007
EUROPÄISCHE NORM

ICS 31.060.50


English version


Fixed capacitors for use in electronic equipment -
Part 4-2: Blank detail specification -
Fixed aluminium electrolytic capacitors
with solid (MnO ) electrolyte -
2
Assessment level EZ
(IEC 60384-4-2:2007)


Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 4-2: Spécification Teil 4-2: Vordruck für Bauartspezifikation -
particulière cadre - Aluminium-Elektrolyt-Kondensatoren
Condensateurs fixes électrolytiques mit festem (MnO ) Elektrolyten -
2
en aluminium à électrolyte solide (MnO ) - Bewertungsstufe EZ
2
Niveau d'assurance de la qualité EZ (IEC 60384-4-2:2007)
(CEI 60384-4-2:2007)


This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-4-2:2007 E

---------------------- Page: 2 ----------------------

EN 60384-4-2:2007 - 2 -
Foreword
The text of document 40/1763/CDV, future edition 2 of IEC 60384-4-2, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique
Acceptance Procedure and was approved by CENELEC as EN 60384-4-2 on 2007-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-4-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60384-4-2:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60384-1 (mod) - Fixed capacitors for use in electronic EN 60384-1 2001
equipment - + corr. October 2001
Part 1: Generic specification


1) 2)
IEC 60384-4 - Fixed capacitors for use in electronic EN 60384-4 2007
equipment -
Part 4: Sectional specification - Aluminium
electrolytic capacitors with solid (MnO ) and
2
non-solid electrolyte


1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 60384-4-2


QC 300302



Second edition

2007-03

Fixed capacitors for use in electronic equipment –
Part 4-2:
Blank detail specification –
Fixed aluminium electrolytic capacitors
with solid (MnO2) electrolyte –
Assessment level EZ
© IEC 2007 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale N
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 60384-4-2 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-2: Blank detail specification –
Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte –
Assessment level EZ


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-4-2 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition cancels and replaces the first edition published in 1985 and its
amendment 1 (1992) and amendment 2 (1996). This edition constitutes a minor revision
related to tables, figures and references.
The text of this standard is based on the following documents:
CDV Report on voting
40/1763/CDV 40/1821/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 6 ----------------------

60384-4-2 © IEC:2007(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use in
electronic equipment, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 7 ----------------------

– 4 – 60384-4-2 © IEC:2007(E)
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-2: Blank detail specification –
Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte –
Assessment level EZ



Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications nor shall they be so described.
In the preparation of detail specifications, the contents of 1.4 of the sectional specification
shall be taken into account.
The numbers between brackets on the first page correspond to the following information
which shall be inserted in the position indicated.
Identification of the detail specification
[1] The International Electrotechnical Commission or the National Standards Organization
under whose authority the detail specification is drafted.
[2] The IEC or National Standards number of the detail specification, data of issue and any
further information required by the national system.
[3] The number and issue number of the IEC or national generic specification.
[4] The IEC number of the blank detail specification.
Identification of the capacitor
[5] A short description of the type of capacitor.
[6] Information on typical construction (when applicable).
NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the
detail specification in this position.
[7] Outline drawing with main dimensions which are of importance for interchangeability
and/or reference to the national or international documents for outlines. Alternatively, this
drawing may be given in an annex to the detail specification.
[8] Application or group of applications covered and/or assessment level.
NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional
specification. This implies that one blank detail specification may be used in combination with several
assessment levels, provided the grouping of the tests does not change.
[9] Reference data on the most important properties, to allow comparison between the
various capacitor types.

---------------------- Page: 8 ----------------------

60384-4-2 © IEC:2007(E) – 5 –

IEC 60384-4-2- XXX [2]
[1]
QC 300302- XXX
ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN IEC 60384-4-2 [4]
ACCORDANCE WITH:
QC 300302
IEC 60384-1
FIXED ALUMINIUM ELECTROLYTIC [5]
IEC 60384-4
CAPACITORS WITH
SOLID (MnO ) ELECTROLYTE
2

[3]
Outline drawing: (see Table 1)
(…angle projection)
[6]
[7]

Assessment level(s): EZ [8]

Performance grade:
(Other shapes are permitted within
the dimensions given.)

Information on the availability of components qualified to this
detail specification is given in the IEC QC 001005.
[9]

---------------------- Page: 9 ----------------------

– 6 – 60384-4-2 © IEC:2007(E)
1 General data
1.1 Recommended method(s) of mounting (to be inserted)
See 1.4.2 of IEC 60384-4.
1.2 Di006Densions
Table 1 – Case size reference and dimensions
Dimensions
mm
Case size reference

Ø L H d ………



NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions should be given
in Table 2, which then becomes Table 1.
NOTE 2 The dimensions should be given as maximum dimensions or as nominal dimensions with a tolerance.

1.3 Ratings and characteristics
Capacitance range (see Table 2)
Tolerance on rated capacitance
Rated voltage (
...