SIST EN 3745-515:2012

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force

This European Standard specifies procedures for the practical measurement of the force required to move the buffer a specified distance relative to the outer jacket.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 515: Einsteckkraft der Beschichtung

Diese Europäische Norm legt Verfahren für die praktische Messung der Kraft fest, die erforderlich ist, um die
Sekundär-Beschichtung um einen bestimmten Weg relativ zur äußeren Ummantelung zu bewegen.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 515 : Force d’insertion de la gaine intermédiaire

La présente Norme Européenne spécifie des procédures pour mesurer la force exigée pour déplacer, sur une longueur indiquée, la gaine intermédiaire par rapport à la gaine extérieure.

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 515. del: Vtična sila blažilne plasti

Ta evropski standard določa postopke za praktične meritve sile, ki je potrebna za premik blažilne plasti za določeno razdaljo, odvisno od zunanjega premera.

General Information

• Status: Published
• Publication Date: 09-Sep-2012
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Aug-2012
• Due Date: 15-Oct-2012
• Completion Date: 10-Sep-2012
• Ref Project: EN 3745-515:2012 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 515: Einsteckkraft der BeschichtungSérie aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 515 : Force d’insertion de la gaine intermédiaireAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-515:2012SIST EN 3745-515:2012en,de01-oktober-2012SIST EN 3745-515:2012SLOVENSKI
STANDARD



SIST EN 3745-515:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3745-515
July 2012 ICS 49.090 English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 515: Force d'insertion de la gaine intermédiaire
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 515: Steckkraft der Sekundär-Beschichtung This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3745-515:2012: ESIST EN 3745-515:2012



EN 3745-515:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Preparation of specimens .44Apparatus .45Method .5 SIST EN 3745-515:2012



EN 3745-515:2012 (E) 3 Foreword This document (EN 3745-515:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nationa
...