Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm

This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Softened 500 MPa ≤ Rm ≤ 700 MPa Forgings De ≤ 100 mm for aerospace applications. ASD-STAN designation: FE-PA13.

Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Abgeschreckt - 500 MPa ≤ Rm ≤ 700 MPa - Schmiedestücke - De ≤ 100 mm

Dieses Dokument legt die Anforderungen an:
Stahl X8CrNiTi18-10 (1.4878/1.4544)
Abgeschreckt
500 MPa ≤ Rm ≤ 700 MPa
Schmiedestücke
De ≤ 100 mm
für Anwendungen in der Luft- und Raumfahrt fest.
ASD-STAN-Bezeichnung: FE-PA13.

Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Adouci - 500 MPa ≤ Rm ≤ 700 MPa - Pièces forgées ou matricées - De ≤ 100 mm

Le présent document spécifie les exigences relatives à :
Acier X8CrNiTi18-10 (1.4878/1.4544) Adouci 500 MPa ≤ Rm ≤ 700 MPa Pièces forgées ou matricées De ≤ 100 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PA13.

Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Popuščano - 500 MPa ≤ Rm ≤ 700 MPa - Izkovki - De ≤ 100 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo X8CrNiTi18-10 (1.4878/1.4544), popuščano, 500 MPa ≤ Rm ≤ 700 MPa, izkovki, De ≤ 100 mm, za uporabo v aeronavtiki. Oznaka ASD-STAN: FE-PA13.

General Information

Status
Published
Publication Date
09-Jan-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Dec-2019
Due Date
10-Feb-2020
Completion Date
10-Jan-2020

Buy Standard

Standard
EN 3468:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3468:2020
01-februar-2020
Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Popuščano - 500 MPa ≤ Rm ≤
700 MPa - Izkovki - De ≤ 100 mm
Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤
700 MPa - Forgings - De ≤ 100 mm
Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Abgeschreckt - 500 MPa ≤
Rm ≤ 700 MPa - Schmiedestücke - De ≤ 100 mm
Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Adouci - 500 MPa ≤ Rm ≤
700 MPa - Pièces forgées ou matricées - De ≤ 100 mm
Ta slovenski standard je istoveten z: EN 3468:2019
ICS:
49.025.10 Jekla Steels
SIST EN 3468:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3468:2020

---------------------- Page: 2 ----------------------
SIST EN 3468:2020


EN 3468
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) -
Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100
mm
Série aérospatiale - Acier X8CrNiTi18-10 Luft- und Raumfahrt - Stahl X8CrNiTi18-10
(1.4878/1.4544) - Adouci - 500 MPa ≤ Rm ≤ 700 MPa - (1.4878/1.4544) - Abgeschreckt - 500 MPa ≤ Rm ≤ 700
Pièces forgées ou matricées - De ≤ 100 mm MPa - Schmiedestücke - De ≤ 100 mm
This European Standard was approved by CEN on 21 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3468:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3468:2020
EN 3468:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 3468:2020
EN 3468:2019 (E)
European foreword
This document (EN 3468:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2020, and conflicting national standards shall be
withdrawn at the latest by May 2020.
Attention is drawn to the possibility that some of the elements
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.