SIST EN ISO 18895:2018
(Main)Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006)
Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006)
ISO 18895:2006 specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.
Schuhe - Prüfverfahren für Gelenke - Ermüdungswiderstand (ISO 18895:2006)
Diese Europäische Norm legt ein Verfahren zur Beurteilung der Ermüdungsfestigkeit von Stahlgelenken fest, die für die Verstärkung des Vorspannbereiches von Damenschuhen und teilweise Herren und Kinderschuhen verwendet werden.
Chaussures - Méthodes d'essai pour cambrions - Résistance à la fatigue (ISO 18895:2006)
L'ISO 18895:2006 spécifie une méthode de contrôle de la résistance à la fatigue des cambrions en acier d'au moins 100 mm de longueur utilisés pour renforcer la cambrure des chaussures pour femmes et de certaines chaussures pour hommes et pour enfants
Obutev - Preskusne metode za spoje - Odpornost proti utrujanju (ISO 18895:2006)
ISO 18895:2006 določa preskusno metodo za ocenjevanje odpornosti proti utrujanju jeklenih spojev z dolžino najmanj 100 mm, ki se uporabljajo za ojačitev območja pasu ženskih čevljev ter nekaterih moških in otroških čevljev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18895:2018
01-december-2018
1DGRPHãþD
SIST EN 12958:2002
SIST EN 12958:2002/A1:2004
Obutev - Preskusne metode za spoje - Odpornost proti utrujanju (ISO 18895:2006)
Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006)
Schuhe - Prüfverfahren für Gelenke - Ermüdungswiderstand (ISO 18895:2006)
Chaussures - Méthodes d'essai pour cambrions - Résistance à la fatigue (ISO
18895:2006)
Ta slovenski standard je istoveten z: EN ISO 18895:2018
ICS:
61.060 Obuvala Footwear
SIST EN ISO 18895:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18895:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 18895:2018
EN ISO 18895
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test methods for shanks - Fatigue resistance
(ISO 18895:2006)
Chaussures - Méthodes d'essai pour cambrions - Schuhe - Prüfverfahren für Gelenke -
Résistance à la fatigue (ISO 18895:2006) Ermüdungsfestigkeit (ISO 18895:2006)
This European Standard was approved by CEN on 20 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18895:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18895:2018
EN ISO 18895:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18895:2018
EN ISO 18895:2018 (E)
European foreword
The text of ISO 18895:2006 has been prepared by Technical Committee ISO/TC 216 "Footwear” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 18895:2018 by
Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12958:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18895:2006 has been approved by CEN as EN ISO 18895:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18895:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 18895:2018
INTERNATIONAL ISO
STANDARD 18895
FIrst edition
2006-04-15
Footwear — Test methods for shanks —
Fatigue resistance
Chaussures — Méthodes d'essai pour cambrions — Résistance à la
fatigue
Reference number
ISO 18895:2006(E)
©
ISO 2006
---------------------- Page: 7 ----------------------
SIST EN ISO 18895:2018
ISO 18895:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 18895:2018
ISO 18895:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all su
...
SLOVENSKI STANDARD
oSIST prEN ISO 18895:2018
01-julij-2018
Obutev - Preskusne metode za spoje - Odpornost proti utrujanju (ISO 18895:2006)
Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006)
Schuhe - Prüfverfahren für Gelenke - Ermüdungswiderstand (ISO 18895:2006)
Chaussures - Méthodes d'essai pour cambrions - Résistance à la fatigue (ISO
18895:2006)
Ta slovenski standard je istoveten z: prEN ISO 18895
ICS:
61.060 Obuvala Footwear
oSIST prEN ISO 18895:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 18895:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18895:2018
INTERNATIONAL ISO
STANDARD 18895
FIrst edition
2006-04-15
Footwear — Test methods for shanks —
Fatigue resistance
Chaussures — Méthodes d'essai pour cambrions — Résistance à la
fatigue
Reference number
ISO 18895:2006(E)
©
ISO 2006
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18895:2018
ISO 18895:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18895:2018
ISO 18895:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18895 was prepared by CEN (as EN 12958) and was adopted, under a special “fast-track procedure”, by
Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO member bodies.
© ISO 2006 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 18895:2018
ISO 18895:2006(E)
Page 2
EN 12958:2000
Contents
Page
Foreword 3
..................................................................................................................................................
1 Scope 4
..................................................................................................................................................
2 Normative references 4
..........................................................................................................................
3 Definitions 4
............................................................................................................................................
4 Apparatus and materials 4
.....................................................................................................................
5 Sampling and conditioning 5
..................................................................................................................
6 Test method 5
........................................................................................................................................
7 Expression of results 5
...........................................................................................................................
8 Test report 5
...........................................................................................................................................
iv © ISO 2006 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 18895:2018
ISO 18895:2006(E)
Page 3
EN 12958:2000
Foreword
This European Standar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.