SIST EN 301 238 V1.1.3:2003

Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)

To provide protected and non-protected support for services requiring isochronous deata transmission complimentary to DECT-ISDN IWP and requiring roaming mobility.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil podatkovnih storitev (DSP) – Izohroni podatkovni nosilec s sledenjem (storitev tipa D, mobilnost razreda 2)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 301 238 V1.1.3 (1998-06) - Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 238 Version 1.1.3SIST EN 301 238 V1.1.3:2003en01-december-2003SIST EN 301 238 V1.1.3:2003SLOVENSKI
STANDARD



SIST EN 301 238 V1.1.3:2003



EN 301 238 V1.1.3 (1998-06)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Data Services Profile (DSP);Isochronous data bearer services with roaming mobility(service type D, mobility class 2)SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)2ReferenceDEN/DECT-020082 (bgo00ie0.PDF)KeywordsData, DECT, GSM, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)3ContentsIntellectual Property Rights.7Foreword.71Scope.82Normative references.83Definitions and abbreviations.103.1Definitions.103.2Abbreviations.104Description of services.124.1Reference configuration.124.2Service objectives.134.2.1General.134.2.232 kbit/s unprotected service.134.2.3Unprotected rate adaptation service.135Physical (PHL) layer requirements.136MAC layer requirements.146.132 kbit/s unprotected service.146.2Unprotected rate adaptation service.147DLC layer requirements.217.1C-plane requirements.217.2U-plane requirements.217.2.132 kbit/s unprotected service.217.2.2Unprotected rate adaptation service.218NWK layer requirements.218.1General.218.2Requirements.229Management entity requirements.2210Generic interworking conventions and procedures.2310.1Bit ordering.23Annex A (normative):LU9 - Unprotected Rate Adaptation for V.series Equipment (RAVE)service.24A.1Overview.24A.1.1FU9 frame structure.24A.1.1.1General frame structure.24A.1.1.2FU9 buffering procedures.25A.1.1.3Connection handover.25A.1.1.4Transmission order.25A.2Alignment signal management.26A.2.1General.26A.2.2Procedures.26A.3V.24 signalling.27A.3.1General.27A.3.2Transmitter procedures.28A.3.3Receiver procedures.28A.4Rate coding.28A.4.1General.28A.4.2Transmitter procedures.29SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)4A.4.3Receiver procedures.30A.5DIC.30A.5.1General.30A.5.2Measurement of phase differences.30A.5.3Compensation control rules.31A.5.3.1General.31A.5.3.2Optimizing error resilience.32A.5.3.2.1Procedure for conveying state changes.32A.5.3.2.2Procedure for executing positive and negative compensation.32A.6Information field.32A.6.1General.32A.6.2User data rates.33A.6.3Information field filling rule.33A.7Primitives.34Annex B (normative):Specific interworking conventions.35B.1Interworking to connection-oriented isochronous bearer services.35B.1.1Scope.35B.1.2Reference configuration.35B.1.2.1PP.36B.1.2.2FP.36B.1.2.3General configuration.37B.1.3PP C-plane procedures.37B.1.4FP C-plane procedures.37B.1.5Network modem interworking service using V.24 connection.38B.1.5.1General.38B.1.5.2Reference configuration.38B.1.5.3TAF interworking to V.24.39B.1.5.3.1General.39B.1.5.3.2V.24 Interchange circuit handling rules.39B.1.5.3.3Call establishment signalling handling.39B.1.5.3.4Data transmission.39B.1.5.4DECT FP Interworking procedures.40B.1.5.4.1General.40B.1.5.4.2Call establishment signalling handling.40B.1.5.4.3V.24 Interchange circuit handling rules.41B.1.5.4.4Modem selection.41B.1.5.4.5Data transmission.41SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)5B.2<> coding.44Annex C (normative):Service D2; PT Profile Implementation Conformance Statement(ICS) - PHL layer.47Annex D (normative):Service D2; FT Profile Implementation Conformance Statement(ICS) - PHL layer.48Annex E (normative):Service D2; PT Profile Implementation Conformance Statement(ICS) and PT Protocol Implementation Conformance Statement(PICS) proforma - Medium Access Control (MAC) layer.49E.1Service D2; PT Profile Implementation Conformance Statement (ICS) - Medium Access Control(MAC) layer.50E.2Service D2; PT Protocol Implementation Conformance Statement (PICS) proforma - MediumAccess Control (MAC) layer.51Annex F (normative):Service D2; FT Profile Implementation Conformance Statement(ICS) and Protocol Implementation Conformance Statement (PICS)proforma - Medium Access Control (MAC) layer.58F.1Service D2; FT Profile Implementation Conformance Statement (ICS) - Medium Access Control(MAC) layer.59F.2Service D2; FT Protocol Implementation Conformance Statement (PICS) proforma - MediumAccess Control (MAC) layer.60Annex G (normative):Service D2; PT Profile Implementation Conformance Statement(ICS) - Data Link Control (DLC) layer.64G.1C-plane.64G.2U-plane.64G.2.1U-plane 32 kbit/s unprotected service.64G.2.2U-plane unprotected rate adaptation service.64Annex H (normative):Service D2; FT Profile Implementation Conformance Statement(ICS) - Data Link Control (DLC) layer.65H.1C-plane.65H.2U-plane.65H.2.1U-plane 32 kbit/s unprotected service.65H.2.2U-plane unprotected rate adaptation service.65SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)6Annex J (normative):Service D2; PT profile Requirement List (profile RL) and ProtocolImplementation Conformance Statement (PICS) proforma -Network (NWK) layer.66J.1Service D2; PT profile Requirement List (profile RL) - Network (NWK) layer.66J.2Service D2; PT Protocol Implementation Conformance Statement (PICS) proforma - Network(NWK) layer.68Annex K (normative):Service D2; FT profile Requirement List (profile RL) and ProtocolImplementation Conformance Statement (PICS) proforma -Network (NWK) layer.69K.1Service D2; FT profile Requirement List (profile RL) - Network (NWK) layer.70K.2Service D2; FT Protocol Implementation Conformance Statement (PICS) proforma - Network(NWK) layer.71History.72SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)7Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect ofETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSIWeb server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. Noguarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).National transposition datesDate of adoption of this EN:5 June 1998Date of latest announcement of this EN (doa):30 September 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 March 1999Date of withdrawal of any conflicting National Standard (dow):31 March 1999SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)81ScopeThe present document specifies a profile for Digital Enhanced Cordless Telecommunications (DECT) systemsconforming to EN 300 175, Parts 1 to 7 ([1] to [7]). It is part of a family of profiles aimed at the general connection ofterminals supporting non-voice services to a fixed infra-structure, private and public.The type D service, mobility class 2, as described in the ETR 185 [9] supports Isochronous Data Bearer Services(IDBSs) with mobility and is suitable for transparent transfer of isochronous data streams. It is intended for use inprivate and public roaming applications. Video telephony, video conferencing and secure telephone services (end-to-endencrypted) over external networks can be considered as applications of IDBS.Phase 1 of the present document defines an unprotected service offering an unrestricted digital 32 kbit/s data bearerservice, strongly based on the Generic Access Profile (GAP) (defined in EN 300 444 [8]), and an unprotected singlebearer, multi-rate, rate adaptation service to interwork to synchronous ITU-T Recommendations V.series interfaces isalso defined.Further phases of this profile may additionally provide multiple rate, multibearer support and limited error correctioncapability for services/applications requiring higher rates and high quality isochronous data transmission.The present document specifies the requirements on the Physical (PHL) layer, Medium Access Control (MAC) layer,Data Link Control (DLC) layer and Network (NWK) layer of DECT. The present document also specifies ManagementEntity (ME) requirements and generic Interworking Conventions (IC).2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)9[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP)".[9]ETR 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);Profile overview".[10]ITU-T Recommendation V.110: "Support by an ISDN of data terminal equipments with V-Seriestype interfaces".[11]CCITT Recommendation V.24 (1988): "List of definitions for interchange circuits between dataterminal equipment (DTE) and data circuit-terminating equipment (DCE)".[12]ITU-T Recommendation V.34 (1996): "A modem operating at data signalling rates of up to33 600 bit/s for use on the general switched telephone network and on leased point-to-point 2-wiretelephone-type circuits".[13]ETS 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS)proforma; Part 1: Portable radio Termination (PT)".[14]ETS 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS)proforma; Part 2: Fixed radio Termination (FT)".[15]ETS 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 1: Network (NWK)layer - Portable radio Termination (PT)".[16]ETS 300 476-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium AccessControl (MAC) layer - Portable radio Termination (PT)".[17]ETS 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK)layer - Fixed radio Termination (FT)".[18]ETS 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium AccessControl (MAC) layer - Fixed radio Termination (FT)".[19]ITU-T Recommendation R.140: "Definitions of essential technical terms in the field of telegraphtransmission".SIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)103Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following definitions apply:a)the definitions in EN 300 444 [8]; andb)the following terms:bearer service: A type of telecommunications service that provides the capability for the transmission of signalsbetween user/network interfaces. For DECT systems, the Air (Radio) interface provides the bearer services between theDECT Fixed radio Termination and the DECT Portable radio Termination.isochronous: Pertaining to a signal or a time-varying phenomenon characterized by significant instants separated bytime intervals having a duration theoretically equal to the duration of a unit interval or to an integral multiple of thisduration (ITU-T Recommendation R.140 [19]).mobility class 1: Closed user groups, for which terminals are pre-registered off-air with one or more specific FixedParts (FP), and establishment of service and user parameters is therefore implicit, according to a profile-defined list.mobility class 2: Private and public roaming applications for which terminals may move between FPs within a givendomain and for which association of service parameters is explicit at the time of service request.service: A set of functions offered to a user by an organization.synchronous: The essential characteristics of time-scales or signals such that their corresponding significant instantsoccur at precisely the same average rate. (not in ITU-T Recommendation R.140 [19])synchronous transmission: Transmission using isochronous signals in which the sending and receiving instruments areoperating continuously in a constant time difference between corresponding significant instants (ITU-TRecommendation R.140 [19]).3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:AALATM Adaptation LayerAIAir InterfaceATMAsynchronous Transfer ModeCCCall ControlC-planeControl planeCRCCyclic Redundancy CheckCshigher layer signalling Channel (slow)DCEData Circuit-terminating EquipmentDICDECT Independent ClockingDLCData Link ControlDSPData Services ProfileDTEData Terminal EquipmentFPFixed PartFTFixed radio TerminationGAPGeneric Access ProfileGSMGlobal System for Mobile communicationIhigher layer Information channelICInterworking ConventionsICSImplementation Conformance StatementIDBSIsochronous Data Bearer ServiceIEInformation ElementISDNIntegrated Services Digital NetworkSIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)11IWFInterworking FunctionsIWPInterworking ProfileIWUInterworking UnitLALocation AreaLCELink Control EntityLCNLogical Connection NumberMACMedium Access ControlMEManagement EntityMMMobility ManagementMUXMUltipleXNWKNetWorKPHLPHysicaLPICSProtocol Implementation Conformance StatementPPPortable Partppmparts per millionPSTNPublic Switched Telephone NetworkPTPortable radio TerminationRAVERate Adaption for V.series EquipmentRFPRadio Fixed PartSAPService Access PointSDUService Data UnitTAFTerminal Adaptation FunctionsTDMATime Division Multiple AccessULEIU-plane Link Endpoint IdentifierU-planeUser planeSIST EN 301 238 V1.1.3:2003



ETSIEN 301 238 V1.1.3 (1998-06)124Description of services4.1Reference configurationThe reference configuration for this profile shall be as shown in figure 1.ApplicationNWKDLCIWFService interworkingmanagementNWKMACPHLDLCMACPHLApplicationNetworkcontrolCircuitorientednetworkcontrolC-planeApplicationDLCIWFMACPHLDLCMACPHLApplicationNetworkcontrolofferingisochronousbearerservicesNetworkU-planePPFPNetworkPPFPNetworkFigure 1: Profile reference configuration showing interworki
...