SIST EN ISO 4628-6:2007
(Main)Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2007)
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2007)
This part of ISO 4628 provides pictorial reference standards f or designating the degree of chalking of paint coatings. It al so describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
Beschichtungstoffe - Beurteilung von Beschichtungsschäden - Bewertung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:2007)
Dieser Teil von ISO 4628 enthält Bilder und ein Verfahren, nach denen der Kreidungsgrad von Beschichtungen bewertet werden kann. Bei diesem Verfahren ist es wichtig, zwischen Abbauprodukten der Beschichtung und anhaftendem Schmutz zu unterscheiden, besonders, wenn die Kreidung nur gering ist.
Peintures et vernis - Évaluation de la dégradation des revetements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif (ISO 4628-6:2007)
L'ISO 4628-6:2007 fournit des clichés de référence pour désigner le degré de farinage des revêtements de peinture. Elle décrit également une méthode pour coter le degré de farinage. Lorsqu'on utilise cette méthode, il faut veiller à bien faire la distinction entre les produits de dégradation proprement dite et la poussière adhérente, particulièrement dans le cas où le farinage est léger.
Barve in laki - Ovrednotenje propadanja premazov - Ugotavljanje obsega in velikosti poškodb ter intenzitete enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim trakom (ISO 4628-6:2007)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2007)Barve in laki - Ovrednotenje propadanja premazov - Ugotavljanje obsega in velikosti poškodb ter intenzitete enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim trakom (ISO 4628-6:2007)Peintures et vernis - Évaluation de la dégradation des revetements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif (ISO 4628-6:2007)Beschichtungstoffe - Beurteilung von Beschichtungsschäden - Bewertung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:2007)Ta slovenski standard je istoveten z:EN ISO 4628-6:2007SIST EN ISO 4628-6:2007en,fr,de87.040Barve in lakiPaints and varnishesICS:SIST EN ISO 4628-6:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN ISO 4628-6:200701-november-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 4628-6September 2007ICS 87.040Supersedes EN ISO 4628-6:2001
English VersionPaints and varnishes - Evaluation of degradation of coatings -Designation of quantity and size of defects, and of intensity ofuniform changes in appearance - Part 6: Assessment of degreeof chalking by tape method (ISO 4628-6:2007)Peintures et vernis - Évaluation de la dégradation desrevêtements - Désignation de la quantité et de la dimensiondes défauts, et de l'intensité des changements uniformesd'aspect - Partie 6: Évaluation du degré de farinage par laméthode du ruban adhésif (ISO 4628-6:2007)Beschichtungstoffe - Beurteilung vonBeschichtungsschäden - Bewertung der Menge und derGröße von Schäden und der Intensität von gleichmäßigenVeränderungen im Aussehen - Teil 6: Bewertung desKreidungsgrades nach dem Klebebandverfahren (ISO4628-6:2007)This European Standard was approved by CEN on 8 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 4628-6:2007: E
EN ISO 4628-6:2007 (E) 2 Contents Page Foreword.3
EN ISO 4628-6:2007 (E) 3 Foreword This document (EN ISO 4628-6:2007) has been prepared by Technical Committee ISO/TC 35 "Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and varnishes", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. This document supersedes EN ISO 4628-6:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 4628-6:2007 has been approved by CEN as a EN ISO 4628-6:2007 without any modification.
Reference numberISO 4628-6:2007(E)© ISO 2007
INTERNATIONAL STANDARD ISO4628-6Second edition2007-02-01Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif
ISO 4628-6:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 4628-6:2007(E) © ISO 2007 – All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4628-6 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and va
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.