SIST EN 301 241-1:2000

• Abstract:

  Profile ICS for voluntary testing of terminals complying to DE/RES-03039 (DECT/ISDN ISC).

• Status: Published
• Publication Date: 31-Dec-1999
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2000
• Due Date: 01-Jan-2000
• Completion Date: 01-Jan-2000
• Mandate: T-306
• Ref Project: ETSI EN 301 241-1 V1.1.1 (1998-12) - Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 1: Portable radio Termination (PT)

SIST EN 301 241-1:2000 is the Slovenian standard for the Profile Implementation Conformance Statement (Profile ICS) proforma for the DECT/ISDN interworking profile in the Portable radio Termination (PT) configuration. It is published by SIST as the Slovenian adoption of ETSI EN 301 241-1 V1.1.1 and is used to document and check implementations that claim conformance to the DECT/ISDN intermediate system configuration profile. In practice, it gives suppliers a structured way to report voluntary conformance for terminals against ETS 300 822 / DE/RES-03039.

What does SIST EN 301 241-1:2000 specify?

SIST EN 301 241-1:2000 specifies the Profile ICS proforma for the PT side of the DECT/ISDN intermediate system configuration profile. It tells the supplier what information to complete and which DECT capabilities must, may, or must not be supported when claiming conformity.

The document is organized into four clauses and three normative annexes:

Part	What it covers
Clause 1-4	Scope, references, definitions and abbreviations, and the conformance requirement
Annex A	System Conformance Statement (SCS) proforma for DECT PT Intermediate ISDN access Profile (IIP)
Annex B	Requirement Lists (RLs) for the DECT PT IIP across NWK, DLC and MAC, with the physical layer PICS left unchanged
Annex C	Profile specific ICS proforma for DECT PT IIP

What are the key requirements of SIST EN 301 241-1:2000?

Clause 4 requires a supplier claiming PT conformance to verify the Profile RLs in Annex B, complete the profile specific ICS in Annex C, complete the SCS in Annex A, and provide identification for both the supplier and the implementation. That is the core conformance workflow: first check the capability list, then record the implementation, then identify the product and responsible party.

Annex B is built around the standard status codes m, o, n/a, x, qualified optional, conditional, and out-of-scope. These codes matter because they decide whether a capability is required, optional, excluded, or irrelevant for testing.

The PT profile makes several NWK functions mandatory, including the Call Control (CC), Mobility Management (MM), Link Control Entity (LCE), and Lower Layer Management Entity (LLME). In practice, this means the implementation must support the core call setup, mobility handling, link control, and management functions expected by the profile.

Annex B also makes specific MM functions mandatory, such as PT authentication, location registration, on-air key allocation, subscription registration procedure on-air, and termination of access rights from the Fixed radio Termination (FT) side. For a buyer or test lab, this shows that the terminal is expected to handle the security and registration steps needed to enter and stay on the system.

On the DLC layer, the profile requires support for C-plane services, U-plane services, management services, and specific procedures such as MAC connection management, DLC C-plane management, DLC U-plane management, connection handover management, and connection ciphering management. Annex B also requires the LU1 - Transparent Unprotected service (TRUP) and the 64 kbit/s data bearer service, so the implementation must carry both control and user traffic in the defined way.

On the MAC layer, the profile requires connection-oriented control, broadcast control, and multiplexing services, plus paging support and defined timer and parameter values. Annex C adds PT-specific profile tables for dynamic C-plane switching, dynamic U-plane switching, LU8 - 64 kbit/s speech and data service, frame types, connection types, transmission classes, MAC timers, and MAC constants. These items show what the implementation must support when switching, paging, and carrying speech or data at the MAC level.

What terms does SIST EN 301 241-1:2000 define?

• Protocol Implementation Conformance Statement (PICS) - a standardized statement of which protocol features an implementation supports.
• Profile Implementation Conformance Statement (Profile ICS) - the profile-level statement used here to record support for the DECT/ISDN PT profile.
• System Conformance Statement (SCS) - the companion statement that describes the whole system and its supporting protocols.
• Portable radio Termination (PT) - the DECT portable side covered by this part of the profile.
• Intermediate ISDN access Profile (IIP) - the DECT/ISDN interworking profile addressed by the standard.
• Requirement List (RL) - the table-based list of capabilities and status codes used to check conformance.

Who uses SIST EN 301 241-1:2000?

SIST EN 301 241-1:2000 is used by suppliers of DECT terminal implementations, conformance test labs, certification teams, and quality managers who need a traceable way to document PT profile support. It is also useful for buyers or evaluators who need to confirm that a device claims the right DECT/ISDN interworking behavior before testing or acceptance.

Which standards are used with SIST EN 301 241-1:2000?

The standard relies on the DECT Common Interface parts EN 300 175-1 to EN 300 175-8 for the layer structure, identities, security features, and speech coding. It uses ETS 300 822 as the profile and interworking specification being checked, and ETS 300 476-1, -2, -3 and -7 as the base PICS proformas that Annex B updates.

It also refers to ISO/IEC 9646-1 and ISO/IEC 9646-7 for the conformance testing framework and the ICS method. For ISDN behavior, it names EN 300 403-1 and EN 300 403-3 for DSS1 call control, ETS 300 402-2 and ETS 300 402-4 for the DSS1 data link layer, and ETS 300 011/A2 and ETS 300 012/A2 for ISDN layer 1 specifications and test principles.

What does the SIST EN 301 241-1:2000 document contain?

The document contains proforma tables for recording implementation data, protocol support, and profile support. Annex A provides the SCS tables for system identity, supplier identity, protocol identification, and profile identification.

Annex B contains requirement tables for DECT NWK, DLC and MAC support, including entities, features, procedures, messages, services, timers, constants, channels, bearer types, slot types, and paging behavior. Annex C contains the profile specific ICS tables, including global conformance, dynamic switching behavior, LU8 service support, and MAC-specific timers and constants.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REOLNLDigital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 1: Portable radio Termination (PT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 241-1 V1.1.13SIST EN 301 241-1:en01QRYHPEHU3SIST EN 301 241-1:SLOVENSKI
STANDARD
EN 301 241-1 V1.1.1 (1998-12)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for intermediatesystem configuration;Profile Implementation Conformance Statement (ICS);Part 1: Portable radio Termination (PT)SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)2ReferenceDEN/DECT-040103-1 (bho90ico.PDF)KeywordsDECT, ICS, ISDN, PROFILEETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)3ContentsIntellectual Property Rights.5Foreword.51Scope.62References.62.1Normative references.62.2Informative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning Profile ICS.9Annex A (normative):System Conformance Statement (SCS) proforma for DECT PTIntermediate ISDN access Profile (IIP).10A.1Identification.10A.1.1Description of the system.10A.1.2Supplier of the system.10A.1.3Client identification.11A.1.4Contact person identification.11A.1.5Signature of the client or of the supplier.11A.2Protocol identification.12A.3Profile identification.12A.4Additional information.12Annex B (normative):RLs for DECT PT IIP.13B.1General.13B.1AProfile RL.13B.2RL on DECT network layer.14B.2.1Network entities.14B.2.2Network features.14B.2.2.1CC features.14B.2.2.2MM features.14B.2.2.3LCE features.15B.2.3Procedures.15B.2.3.1CC procedures supported.15B.2.3.2MM procedures supported.16B.2.3.3LCE procedures supported.16B.2.3.4LLME procedures supported.17B.2.4Messages.17B.2.4.1CC messages.17B.2.4.2MM messages.18B.2.4.3LCE messages.18B.3RL on DECT DLC layer.19B.3.1Services.19B.3.1.1Data link services.19B.3.1.2C-plane services.19B.3.1.3U-plane services.19B.3.1.4Management services.19B.3.2Procedures.19B.3.2.1Generic signalling procedures.19SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)4B.3.2.2Class B procedures.20B.3.2.3LU1 procedures.20B.3.2.4FU1 options.20B.3.2.5Management procedures.20B.3.2.6 MAC connection management procedures.20B.3.2.7DLC C-plane management procedures.21B.3.2.8DLC U-plane management procedures.21B.3.2.9Connection ciphering management procedures.21B.3.3Parameters.21B.3.3ALU1 Connection types.21B.4RL on DECT MAC layer.21B.4.1Capabilities.21B.4.1.1Services.21B.4.1.1.1Connection oriented control services.22B.4.1.1.2Broadcast control services.22B.4.1.1.3Multiplexing services.23B.4.1.1.4Management services.23B.4.1.2Procedures.24B.4.1.2.1Connection procedures.24B.4.1.2.1.1Connection setup procedures.24B.4.1.2.1.2Connection modification procedures.24B.4.1.2.1.3Connection release procedures.24B.4.1.2.2Broadcast procedures.24B.4.2Protocol parameters.25B.4.2.1Timer support.25B.4.2.2Protocol constants.25B.4.2.3Channels supported.25B.4.2.4Bearer types supported.25B.4.2.5Slot types supported.25B.4.2.6Paging tail messages supported.26Annex C (normative):Profile specific ICS proforma for DECT PT IIP.27C.1Guidance for completing the profile specific ICS proforma.27C.1.1Purposes and structure.27C.1.2Instructions for completing the Profile specific ICS proforma.29C.2Identification of the implementation.29C.2.1Date of statement.29C.2.2Identification of the implementation.29C.2.3Contact person identification.29C.2.4Relationship with the System Conformance Statement (SCS).30C.3Identification of the profile.30C.3.1Defect report numbers and amendments implemented.30C.3.2Addenda implemented.30C.4Profile ICS proforma tables.31C.4.1Global statement of conformance.31C.4.2Profile ICS DECT NWK layer tables.31C.4.3Profile ICS DECT DLC layer tables.31C.4.4Profile ICS DECT MAC layer tables.32History.33SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 1 of a multi-part standard covering the DECT/ISDN interworking for intermediate systemconfiguration Profile Implementation Conformance Statement (ICS), as identified below:Part 1:"Portable radio Termination (PT)";Part 2:"Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:23 October 1998Date of latest announcement of this EN (doa):31 January 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 July 1999Date of withdrawal of any conflicting National Standard (dow):31 July 1999SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)61ScopeThe present document provides the Profile Implementation Conformance Statement (Profile ICS) proforma for theDECT/ISDN interworking for intermediate system configuration profile at the Portable radio Termination (PT) asdefined in ETS 300 822 [9] in compliance with the relevant requirements and in accordance with the relevant guidancegiven in ISO/IEC 9646-7 [15].The supplier of an implementation which claims to conform to ETS 300 822 [9] is required to complete a copy of thePICS proforma ETS 300 476 parts 1, 2, 3, and 7, [10], [11], [12] and [13], with the replacements provided by theRequirement Lists (RLs) given in annex B of the present document, as well as a copy of the specific ICS proformaprovided in the annex C of the present document.2ReferencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.2.1Normative references[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 8: Speech coding and transmission".[9]ETS 300 822: "Digital Enhanced Cordless Telecommunications (DECT); Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for intermediate system configuration;Interworking and profile specification".SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)7[10]ETS 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 1: Network (NWK)layer - Portable radio Termination (PT)".[11]ETS 300 476-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data LinkControl (DLC) layer - Portable radio Termination (PT)".[12]ETS 300 476-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium AccessControl (MAC) layer - Portable radio Termination (PT)".[13]ETS 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer".[14]ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 1: General concepts".[15]ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 7: Implementation Conformance Statements".[16]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[17]EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3:Protocol Implementation Conformance Statement (PICS) proforma specification".[18]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification[ITU-T Recommendation Q.921 (1993), modified]".[19]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 4: Protocol Implementation ConformanceStatement (PICS) proforma specification for the general protocol".[20]ETS 300 011 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN);Primary rate user-network interface; Layer 1 specification and test principles".[21]ETS 300 011/A2: "Amendment 2 to ETS 300 011 (1992), adding a SCS, a PICS and a PIXIT forinterface points Ia and Ib".[22]ETS 300 012 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN); Basicuser-network interface; Layer 1 specification and test principles".[23]ETS 300 012/A2: "Amendment 2 to ETS 300 012 (1992), adding a SCS, a PICS and a PIXIT forinterface points Ia and Ib".2.2Informative references[24]ETS 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 1:Interworking specification".[25]ETS 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 2: Accessprofile".[26]ISO/IEC 9646-6: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 6: Protocol profile test specification".SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)8[27]ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile conformancetesting specifications; Standardization methodology".3Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [15];b)the definitions in ETS 300 822 [9]; andc)the following terms defined in ISO/IEC 9646-1 [14]:-Protocol Implementation Conformance Statement (PICS) proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:CCCall ControlC-planeControl planeDECTDigital Enhanced Cordless TelecommunicationsDLCData Link ControlFTFixed radio TerminationICSImplementation Conformance StatementIIPIntermediate ISDN access ProfileISDNIntegrated Services Digital NetworkLCELink Control EntityLLMELower Layer Management EntityMACMedium Access ControlMMMobility ManagementNWKNetworkPCTRProtocol Conformance Test ReportPHLPhysicalPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationPTPortable radio TerminationRLRequirements ListSCSSystem Conformance StatementSCTRSystem Conformance Test ReportTRUPTransparent Unprotected serviceU-planeUser planeSIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)94Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the Portable radio Termination (PT) specificrequirements of ETS 300 822 [9] shall:-verify that his protocol implementation meets the Profile Requirements Lists (Profile RLs) for each DECTprotocol layer, contained in annex B of the present document;-complete a copy of the Profile specific ICS proforma provided in annex C;-complete a copy of the System Conformance Statement (SCS) proforma provided in annex A; and-provide the information necessary to identify both the supplier and the implementation.Table 1 provides guidance to indicate how to fulfil the PICS proforma required for the profile.Table 1: DECT PICS proforma tablePICSTablesChangeETS 300 476-1 [10]A.12Status column updated by RL subclause B.2.1A.13Status column updated by RL subclause B.2.2.1A.14Status column updated by RL subclause B.2.2.2A.16Status column updated by RL subclause B.2.2.3A.18Status column updated by RL subclause B.2.3.1A.19Status column updated by RL subclause B.2.3.2A.23Status column updated by RL subclause B.2.3.3A.24Status column updated by RL subclause B.2.3.4A.25 and A.26Status column updated by RL subclause B.2.4.1A.51 and A.52Status column updated by RL subclause B.2.4.2A.126 and A.127Status column updated by RL subclause B.2.4.3All other tablesUnchangedETS 300 476-2 [11]A.9Status column updated by RL subclause B.3.1.1A.10Status column updated by RL subclause B.3.1.2A.11Status column updated by RL subclause B.3.1.3A.12Status column updated by RL subclause B.3.1.4A.13Status column updated by RL subclause B.3.2.1A.16Status column updated by RL subclause B.3.2.2A.18Status column updated by RL subclause B.3.2.3A.19Status column updated by RL subclause B.3.2.4A.30Status column updated by RL subclause B.3.2.5A.31Status column updated by RL subclause B.3.2.6A.32Status column updated by RL subclause B.3.2.7A.33Status column updated by RL subclause B.3.2.8A.34Status column updated by RL subclause B.3.2.9A.40Status column updated by RL subclause B.3.3.1All other tablesUnchangedETS 300 476-3 [12]A.9Status column updated by RL subclause B.4.1.1A.10 to A.12 and A.14Status column updated by RL subclause B.4.1.1.1A.15Status column updated by RL subclause B.4.1.1.2A.19 to A.23Status column updated by RL subclause B.4.1.1.3A.24Status column updated by RL subclause B.4.1.1.4A.26 and A.29Status column updated by RL subclause B.4.1.2.1.1A.30Status column updated by RL subclause B.4.1.2.1.2A.33Status column updated by RL subclause B.4.1.2.1.3A.34Status column updated by RL subclause B.4.1.2.2A.41Status column updated by RL subclause B.4.2.1A.42Status column updated by RL subclause B.4.2.2A.44Status column updated by RL subclause B.4.2.3A.45Status column updated by RL subclause B.4.2.4A.46Status column updated by RL subclause B.4.2.5A.58Status column updated by RL subclause B.4.2.6All other tablesUnchangedETS 300 476-7 [13]All tablesUnchangedSIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)10Annex A (normative):System Conformance Statement (SCS) proforma for DECTPT Intermediate ISDN access Profile (IIP)Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the SCS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed SCS.A.1IdentificationA.1.1Description of the systemTable A.1: Description of the systemProduct name:Hardware version number:Software version number:CPU type:Bus-system:Operating system name:Operating system version number:Additional:A.1.2Supplier of the systemTable A.2: Supplier of the systemCompany:Street:Postal code / city:Country:SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)11A.1.3Client identificationIf different from the supplier.Table A.3: Client identificationCompany:Street:Postal code / city:Country:A.1.4Contact person identificationTable A.4: Contact person identificationName:Telephone:Fax:Telex:E-mail:A.1.5Signature of the client or of the supplierTable A.5: Signature of the client or of the supplierName:Position:Signature:Date:SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)12A.2Protocol identificationThis table identifies the protocols that have to be supported. The Protocol Conformance Test Report (PCTR) referencecolumn may be used to refer to any PCTR that have been obtained for these protocols in this system.Table A.6: Protocol identificationItemProtocol nameSpecificationreferencePICSreferencePCTRreferencePr1ISDN L3 layerEN 300 403-1 [16]EN 300 403-3 [17]Pr2ISDN L2 layerETS 300 402-2 [18]ETS 300 402-4 [19]Pr3ISDN L1 layerETS 300 011 [20]ETS 300 012 [22]ETS 300 011/A2 [21]ETS 300 012/A2 [23]Pr4DECT NWK layerEN 300 175-5 [5]ETS 300 476-4 [10]Pr5DECT DLC layerEN 300 175-4 [4]ETS 300 476-5 [11]Pr6DECT MAC layerEN 300 175-3 [3]ETS 300 476-6 [12]Pr7DECT PH layerEN 300 175-2 [2]ETS 300 476-7 [13]DLC:Data Link ControlMAC:Medium Access ControlNWK:NetworkA.3Profile identificationThis table identifies the profiles that have to be supported. The System Conformance Test Report (SCTR) referencecolumn may be used to refer to any SCTR that have been obtained for these profiles in this system.Table A.7: Profile identificationItemProfile identifierSpecificationreferenceProfile specific ICSreferenceSCTR referencePo1ISDN Intermediate systemconfiguration Profile (IIP)ETS 300 822 [9]EN 301 241-1A.4Additional informationAny additional information which is relevant for the product may be given here (e.g. information that is needed forfurther certification: quality system used, available certificates, etc.).SIST EN 301 241-1:2000

ETSI
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REOLNLDigital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 1: Portable radio Termination (PT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 241-1 Version 1.1.1SIST EN 301 241-1:2000en01-januar-2000SIST EN 301 241-1:2000SLOVENSKI
STANDARD
EN 301 241-1 V1.1.1 (1998-12)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for intermediatesystem configuration;Profile Implementation Conformance Statement (ICS);Part 1: Portable radio Termination (PT)SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)2ReferenceDEN/DECT-040103-1 (bho90ico.PDF)KeywordsDECT, ICS, ISDN, PROFILEETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)3ContentsIntellectual Property Rights.5Foreword.51Scope.62References.62.1Normative references.62.2Informative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning Profile ICS.9Annex A (normative):System Conformance Statement (SCS) proforma for DECT PTIntermediate ISDN access Profile (IIP).10A.1Identification.10A.1.1Description of the system.10A.1.2Supplier of the system.10A.1.3Client identification.11A.1.4Contact person identification.11A.1.5Signature of the client or of the supplier.11A.2Protocol identification.12A.3Profile identification.12A.4Additional information.12Annex B (normative):RLs for DECT PT IIP.13B.1General.13B.1AProfile RL.13B.2RL on DECT network layer.14B.2.1Network entities.14B.2.2Network features.14B.2.2.1CC features.14B.2.2.2MM features.14B.2.2.3LCE features.15B.2.3Procedures.15B.2.3.1CC procedures supported.15B.2.3.2MM procedures supported.16B.2.3.3LCE procedures supported.16B.2.3.4LLME procedures supported.17B.2.4Messages.17B.2.4.1CC messages.17B.2.4.2MM messages.18B.2.4.3LCE messages.18B.3RL on DECT DLC layer.19B.3.1Services.19B.3.1.1Data link services.19B.3.1.2C-plane services.19B.3.1.3U-plane services.19B.3.1.4Management services.19B.3.2Procedures.19B.3.2.1Generic signalling procedures.19SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)4B.3.2.2Class B procedures.20B.3.2.3LU1 procedures.20B.3.2.4FU1 options.20B.3.2.5Management procedures.20B.3.2.6 MAC connection management procedures.20B.3.2.7DLC C-plane management procedures.21B.3.2.8DLC U-plane management procedures.21B.3.2.9Connection ciphering management procedures.21B.3.3Parameters.21B.3.3ALU1 Connection types.21B.4RL on DECT MAC layer.21B.4.1Capabilities.21B.4.1.1Services.21B.4.1.1.1Connection oriented control services.22B.4.1.1.2Broadcast control services.22B.4.1.1.3Multiplexing services.23B.4.1.1.4Management services.23B.4.1.2Procedures.24B.4.1.2.1Connection procedures.24B.4.1.2.1.1Connection setup procedures.24B.4.1.2.1.2Connection modification procedures.24B.4.1.2.1.3Connection release procedures.24B.4.1.2.2Broadcast procedures.24B.4.2Protocol parameters.25B.4.2.1Timer support.25B.4.2.2Protocol constants.25B.4.2.3Channels supported.25B.4.2.4Bearer types supported.25B.4.2.5Slot types supported.25B.4.2.6Paging tail messages supported.26Annex C (normative):Profile specific ICS proforma for DECT PT IIP.27C.1Guidance for completing the profile specific ICS proforma.27C.1.1Purposes and structure.27C.1.2Instructions for completing the Profile specific ICS proforma.29C.2Identification of the implementation.29C.2.1Date of statement.29C.2.2Identification of the implementation.29C.2.3Contact person identification.29C.2.4Relationship with the System Conformance Statement (SCS).30C.3Identification of the profile.30C.3.1Defect report numbers and amendments implemented.30C.3.2Addenda implemented.30C.4Profile ICS proforma tables.31C.4.1Global statement of conformance.31C.4.2Profile ICS DECT NWK layer tables.31C.4.3Profile ICS DECT DLC layer tables.31C.4.4Profile ICS DECT MAC layer tables.32History.33SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 1 of a multi-part standard covering the DECT/ISDN interworking for intermediate systemconfiguration Profile Implementation Conformance Statement (ICS), as identified below:Part 1:"Portable radio Termination (PT)";Part 2:"Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:23 October 1998Date of latest announcement of this EN (doa):31 January 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 July 1999Date of withdrawal of any conflicting National Standard (dow):31 July 1999SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)61ScopeThe present document provides the Profile Implementation Conformance Statement (Profile ICS) proforma for theDECT/ISDN interworking for intermediate system configuration profile at the Portable radio Termination (PT) asdefined in ETS 300 822 [9] in compliance with the relevant requirements and in accordance with the relevant guidancegiven in ISO/IEC 9646-7 [15].The supplier of an implementation which claims to conform to ETS 300 822 [9] is required to complete a copy of thePICS proforma ETS 300 476 parts 1, 2, 3, and 7, [10], [11], [12] and [13], with the replacements provided by theRequirement Lists (RLs) given in annex B of the present document, as well as a copy of the specific ICS proformaprovided in the annex C of the present document.2ReferencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.2.1Normative references[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 8: Speech coding and transmission".[9]ETS 300 822: "Digital Enhanced Cordless Telecommunications (DECT); Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for intermediate system configuration;Interworking and profile specification".SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)7[10]ETS 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 1: Network (NWK)layer - Portable radio Termination (PT)".[11]ETS 300 476-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data LinkControl (DLC) layer - Portable radio Termination (PT)".[12]ETS 300 476-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium AccessControl (MAC) layer - Portable radio Termination (PT)".[13]ETS 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer".[14]ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 1: General concepts".[15]ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 7: Implementation Conformance Statements".[16]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[17]EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3:Protocol Implementation Conformance Statement (PICS) proforma specification".[18]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification[ITU-T Recommendation Q.921 (1993), modified]".[19]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 4: Protocol Implementation ConformanceStatement (PICS) proforma specification for the general protocol".[20]ETS 300 011 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN);Primary rate user-network interface; Layer 1 specification and test principles".[21]ETS 300 011/A2: "Amendment 2 to ETS 300 011 (1992), adding a SCS, a PICS and a PIXIT forinterface points Ia and Ib".[22]ETS 300 012 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN); Basicuser-network interface; Layer 1 specification and test principles".[23]ETS 300 012/A2: "Amendment 2 to ETS 300 012 (1992), adding a SCS, a PICS and a PIXIT forinterface points Ia and Ib".2.2Informative references[24]ETS 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 1:Interworking specification".[25]ETS 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 2: Accessprofile".[26]ISO/IEC 9646-6: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 6: Protocol profile test specification".SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)8[27]ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile conformancetesting specifications; Standardization methodology".3Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [15];b)the definitions in ETS 300 822 [9]; andc)the following terms defined in ISO/IEC 9646-1 [14]:-Protocol Implementation Conformance Statement (PICS) proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:CCCall ControlC-planeControl planeDECTDigital Enhanced Cordless TelecommunicationsDLCData Link ControlFTFixed radio TerminationICSImplementation Conformance StatementIIPIntermediate ISDN access ProfileISDNIntegrated Services Digital NetworkLCELink Control EntityLLMELower Layer Management EntityMACMedium Access ControlMMMobility ManagementNWKNetworkPCTRProtocol Conformance Test ReportPHLPhysicalPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationPTPortable radio TerminationRLRequirements ListSCSSystem Conformance StatementSCTRSystem Conformance Test ReportTRUPTransparent Unprotected serviceU-planeUser planeSIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)94Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the Portable radio Termination (PT) specificrequirements of ETS 300 822 [9] shall:-verify that his protocol implementation meets the Profile Requirements Lists (Profile RLs) for each DECTprotocol layer, contained in annex B of the present document;-complete a copy of the Profile specific ICS proforma provided in annex C;-complete a copy of the System Conformance Statement (SCS) proforma provided in annex A; and-provide the information necessary to identify both the supplier and the implementation.Table 1 provides guidance to indicate how to fulfil the PICS proforma required for the profile.Table 1: DECT PICS proforma tablePICSTablesChangeETS 300 476-1 [10]A.12Status column updated by RL subclause B.2.1A.13Status column updated by RL subclause B.2.2.1A.14Status column updated by RL subclause B.2.2.2A.16Status column updated by RL subclause B.2.2.3A.18Status column updated by RL subclause B.2.3.1A.19Status column updated by RL subclause B.2.3.2A.23Status column updated by RL subclause B.2.3.3A.24Status column updated by RL subclause B.2.3.4A.25 and A.26Status column updated by RL subclause B.2.4.1A.51 and A.52Status column updated by RL subclause B.2.4.2A.126 and A.127Status column updated by RL subclause B.2.4.3All other tablesUnchangedETS 300 476-2 [11]A.9Status column updated by RL subclause B.3.1.1A.10Status column updated by RL subclause B.3.1.2A.11Status column updated by RL subclause B.3.1.3A.12Status column updated by RL subclause B.3.1.4A.13Status column updated by RL subclause B.3.2.1A.16Status column updated by RL subclause B.3.2.2A.18Status column updated by RL subclause B.3.2.3A.19Status column updated by RL subclause B.3.2.4A.30Status column updated by RL subclause B.3.2.5A.31Status column updated by RL subclause B.3.2.6A.32Status column updated by RL subclause B.3.2.7A.33Status column updated by RL subclause B.3.2.8A.34Status column updated by RL subclause B.3.2.9A.40Status column updated by RL subclause B.3.3.1All other tablesUnchangedETS 300 476-3 [12]A.9Status column updated by RL subclause B.4.1.1A.10 to A.12 and A.14Status column updated by RL subclause B.4.1.1.1A.15Status column updated by RL subclause B.4.1.1.2A.19 to A.23Status column updated by RL subclause B.4.1.1.3A.24Status column updated by RL subclause B.4.1.1.4A.26 and A.29Status column updated by RL subclause B.4.1.2.1.1A.30Status column updated by RL subclause B.4.1.2.1.2A.33Status column updated by RL subclause B.4.1.2.1.3A.34Status column updated by RL subclause B.4.1.2.2A.41Status column updated by RL subclause B.4.2.1A.42Status column updated by RL subclause B.4.2.2A.44Status column updated by RL subclause B.4.2.3A.45Status column updated by RL subclause B.4.2.4A.46Status column updated by RL subclause B.4.2.5A.58Status column updated by RL subclause B.4.2.6All other tablesUnchangedETS 300 476-7 [13]All tablesUnchangedSIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)10Annex A (normative):System Conformance Statement (SCS) proforma for DECTPT Intermediate ISDN access Profile (IIP)Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the SCS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed SCS.A.1IdentificationA.1.1Description of the systemTable A.1: Description of the systemProduct name:Hardware version number:Software version number:CPU type:Bus-system:Operating system name:Operating system version number:Additional:A.1.2Supplier of the systemTable A.2: Supplier of the systemCompany:Street:Postal code / city:Country:SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)11A.1.3Client identificationIf different from the supplier.Table A.3: Client identificationCompany:Street:Postal code / city:Country:A.1.4Contact person identificationTable A.4: Contact person identificationName:Telephone:Fax:Telex:E-mail:A.1.5Signature of the client or of the supplierTable A.5: Signature of the client or of the supplierName:Position:Signature:Date:SIST EN 301 241-1:2000

ETSIEN 301 241-1 V1.1.1 (1998-12)12A.2Protocol identificationThis table identifies the protocols that have to be supported. The Protocol Conformance Test Report (PCTR) referencecolumn may be used to refer to any PCTR that have been obtained for these protocols in this system.Table A.6: Protocol identificationItemProtocol nameSpecificationreferencePICSreferencePCTRreferencePr1ISDN L3 layerEN 300 403-1 [16]EN 300 403-3 [17]Pr2ISDN L2 layerETS 300 402-2 [18]ETS 300 402-4 [19]Pr3ISDN L1 layerETS 300 011 [20]ETS 300 012 [22]ETS 300 011/A2 [21]ETS 300 012/A2 [23]Pr4DECT NWK layerEN 300 175-5 [5]ETS 300 476-4 [10]Pr5DECT DLC layerEN 300 175-4 [4]ETS 300 476-5 [11]Pr6DECT MAC layerEN 300 175-3 [3]ETS 300 476-6 [12]Pr7DECT PH layerEN 300 175-2 [2]ETS 300 476-7 [13]DLC:Data Link ControlMAC:Medium Access ControlNWK:NetworkA.3Profile identificationThis table identifies the profiles that have to be supported. The System Conformance Test Report (SCTR) referencecolumn may be used to refer to any SCTR that have been obtained for these profiles in this system.Table A.7: Profile identificationItemProfile identifierSpecificationreferenceProfile specific ICSreferenceSCTR referencePo1ISDN Intermediate systemconfiguration Profile (IIP)ETS 300 822 [9]EN 301 241-1A.4Additional informationAny additional information which is relevant for the product may be given here (e.g. information that is needed forfurther certification: quality system used, available certificates, etc.).SIST EN 301 241-1:200
...