SIST EN 301 614-2:2000
(Main)Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Part 2: Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)
Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Part 2: Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)
Profile Specific Test Specification (PSTS) for voluntary testing of terminals complying to DE/RES-03039 (DECT/ISDN ISC).
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Digitalno omrežje z integriranimi storitvami (ISDN) - Vzajemno delovanje DECT/ISDN v obliki posredovalnega sistema - 2. del: Preskuševalna specifikacija, odvisna od profila (PSTS), za prenosno radijsko zaključitev (PT)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REOLNLDigital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Part 2: Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 614-2 V.1.23SIST EN 301 614-2:en01-QRYHPEHr-3SIST EN 301 614-2:SLOVENSKI
STANDARD
SIST EN 301 614-2:2000
EN 301 614-2 V1.1.2 (1999-02)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking forintermediate system configuration;Part 2: Profile Specific Test Specification (PSTS) forPortable radio Termination (PT)SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)2ReferenceDEN/DECT-040104-2 (ey0i0idc.PDF)KeywordsDECT, ICS, ISDN, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)3ContentsIntellectual Property Rights.7Foreword.71Scope.82Normative references.83Definitions and abbreviations.113.1Definitions.113.2Abbreviations.114DECT NWK layer protocol.124.1Additional Test Purposes (TPs).124.1.1Additional TPs for IIP CC specific behaviours.134.1.1.1Test group PT/CC/BV/IS.134.1.1.2Test group PT/CC/BI/IS.134.1.1.3Test group PT/CC/BO/IS.144.1.1.4Test group PT/CC/TI/IS.144.1.2Additional TPs for IIP LCE specific behaviours.144.1.2.1Test group PT/LC/BV/IS.144.2Abstract Test Method (ATM).144.3Relevant test cases.144.4Additional test cases.164.5Modified test cases.165DECT Data Link Control layer (DLC) layer protocol.175.1Additional TPs.175.1.1Additional TPs for C-plane class B procedures.195.1.1.1Test group CA.195.1.1.2Test group BV.215.1.1.3Test group BI.225.1.1.4Test group BO.235.1.2Additional TPs for U-plane LU7 procedures.245.1.2.1Test group BV.245.1.3Additional TPs for U-plane LU8 procedures.245.1.3.1Test group BV.245.2ATM.255.3Relevant test cases.255.4Additional test cases.255.4.1Additional test cases for C-plane class B.255.4.2Additional test cases for U-plane LU7.255.4.3Additional test cases for U-plane LU8.255.5Modified test cases.256DECT MAC layer protocol.266.1Additional TPs.266.1.1Additional TPs for advanced symmetric connections.276.1.2Additional TPs for C-plane switching procedures.276.1.2.1Dynamic switching CF to CS: DIFS initiated.276.1.2.2Dynamic switching CS to CF: DIPS initiated.286.1.2.3Dynamic switching CS to CF: DIFS initiated.286.1.2.4Dynamic switching CSx to CSy: DIFS initiated.296.1.3Additional TPs for U-plane switching procedures.296.1.3.1Connection handover procedure.296.1.3.2Release of part of double slot procedure.306.2ATM.306.3Relevant test cases.306.4Additional test cases.31SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)46.4.1Additional test cases for advanced symmetric connections.316.4.2Additional test cases for C-plane switching procedures.316.4.3Additional test cases for U-plane switching procedures.316.5Modified test cases.327DECT PHL protocol.327.1Additional TPs.327.2ATM.327.3Relevant test cases.327.4Additional test cases.327.5Modified test cases.328ISDN basic access protocols.338.1Applicability of ATS.338.2Additional TPs.338.3ATM.338.4Relevant test cases.339DECT/ISDN IIP profile.349.1Profile TSS.349.1.1Test groups.349.1.1.1Functional modules.349.1.1.2Main test groups.349.1.1.2.1Capability (CA) tests.349.1.1.2.2BV tests.359.1.1.2.3BO tests.359.1.1.2.4BI tests.359.2Profile TPs.359.2.1TP definition conventions.359.2.2TP naming conventions.369.2.3Sources of TP definitions.369.2.4TPs for IWU Link Association Entity.379.2.5TPs for IWU missing resource management.379.2.6TPs for IWU Call Control specific procedures.389.3Profile ATM.389.4Profile untestable TPs.399.5Profile ATS conventions.409.5.1Declarations part naming conventions.409.5.1.1Type and structured type definitions.409.5.1.2Operations definitions.409.5.1.3Parameter declarations.409.5.1.4Selection expression definitions.409.5.1.5Constant declarations.409.5.1.6Test suite variable declarations.419.5.1.7Test case variable declarations.419.5.1.8PCO declarations.419.5.1.9Timer declarations.419.5.1.10ASP type definitions.419.5.1.11PDU type definitions.429.5.1.12Alias definitions.429.5.2Constraints part naming conventions.429.5.3Dynamic part naming conventions.429.5.3.1Test Case identifier.439.5.3.2Test Step identifier.439.5.3.3Default identifier.439.5.3.4General aspects.439.5.3.5ATS abbreviations.449.5.4Declaration part implementation conventions.449.5.5Constraint part implementation conventions.449.5.6Dynamic part implementation conventions.459.5.7Documentation implementation conventions.45SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)59.6Test case and TP mapping.46Annex A (normative):Profile IXIT proforma.47A.1Identification summary.47A.2ATS summary.47A.3Test laboratory.47A.4Client identification.48A.5System Under Test (SUT).48A.6Profile information.49A.6.1NWK layer.49A.6.2DLC layer.51A.6.3MAC layer.53Annex B (normative):Profile Conformance Test Report (Profile CTR) proforma.55B.1Identification summary.55B.1.1Protocol conformance test report.55B.1.2IUT identification.55B.1.3Testing environment.56B.1.4Limits and reservation.56B.1.5Comments.56B.2IUT conformance status.56B.3Static conformance summary.57B.4Dynamic conformance summary.57B.5Static conformance review report.57B.6Test campaign report.58B.7Observations.58Annex C (normative):System Conformance Test Report (SCTR) proforma.59C.1Identification summary.59C.1.1System conformance test report.59C.1.2Test laboratory.59C.1.3Client identification.60C.1.4SUT.60C.1.5Profile identification.60C.1.6Nature of conformance testing.61C.1.7Limits and reservations.61C.1.8Record of agreement.61C.1.9Comments.62C.2System report summary for DECT/ISDN IIP PT.62C.2.1Profile testing summary for DECT NWK layer protocol.62C.2.2Profile testing summary for DECT DLC layer protocol.63C.2.3Profile testing summary for DECT MAC layer protocol.64C.2.4Profile testing summary for DECT PHL protocol.65C.2.5Profile testing summary for ISDN L2, L1 basic access protocol.66C.2.6Profile testing summary for DECT/ISDN IIP Profile.67Annex D (normative):Profile IXIT Requirements List (XRL) proforma.68D.1Profile eXtra Requirement List for IIP - PT part.68D.1.1Parameters for IWU layer.68D.1.2Specific parameters for NWK layer.68D.1.3Specific parameters for DLC layer.69SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)6D.1.4Specific parameters for MAC layer.69Annex E (normative):Modifications of DECT Common Interface (CI) PCTR proforma.70E.1Modifications of DECT NWK layer PCTR proforma.70E.2Modifications of DECT DLC layer PCTR proforma.73E.3Modifications of DECT MAC layer PCTR proforma.76E.4Observations.77Annex F (normative):Abstract Test Suite (ATS) - NWK layer.78F.1The TTCN Graphical form (TTCN.GR).78F.2The TTCN Machine Processable form (TTCN.MP).78Annex G (normative):Abstract Test Suite (ATS) - DLC layer.79G.1The TTCN Graphical form (TTCN.GR).79G.2The TTCN Machine Processable form (TTCN.MP).79Annex H (normative):Abstract Test Suite (ATS) - MAC layer.80H.1The TTCN Graphical form (TTCN.GR).80H.2The TTCN Machine Processable form (TTCN.MP).80Annex J (normative):Abstract Test Suite (ATS) - Interworking Unit (IWU).81J.1The TTCN Graphical form (TTCN.GR).81J.2The TTCN Machine Processable form (TTCN.MP).81History.82SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)7Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 2 of a multi-part EN covering the DECT/ISDN interworking for intermediate systemconfiguration, as identified below:Part 1:"Profile Test Specification (PTS) summary";Part 2:"Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)";Part 3:"Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:25 December 1998Date of latest announcement of this EN (doa):31 March 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):30 September 1999Date of withdr
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REOLNLDigital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Part 2: Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 614-2 Version 1.1.2SIST EN 301 614-2:2000en01-januar-2000SIST EN 301 614-2:2000SLOVENSKI
STANDARD
SIST EN 301 614-2:2000
EN 301 614-2 V1.1.2 (1999-02)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking forintermediate system configuration;Part 2: Profile Specific Test Specification (PSTS) forPortable radio Termination (PT)SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)2ReferenceDEN/DECT-040104-2 (ey0i0idc.PDF)KeywordsDECT, ICS, ISDN, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)3ContentsIntellectual Property Rights.7Foreword.71Scope.82Normative references.83Definitions and abbreviations.113.1Definitions.113.2Abbreviations.114DECT NWK layer protocol.124.1Additional Test Purposes (TPs).124.1.1Additional TPs for IIP CC specific behaviours.134.1.1.1Test group PT/CC/BV/IS.134.1.1.2Test group PT/CC/BI/IS.134.1.1.3Test group PT/CC/BO/IS.144.1.1.4Test group PT/CC/TI/IS.144.1.2Additional TPs for IIP LCE specific behaviours.144.1.2.1Test group PT/LC/BV/IS.144.2Abstract Test Method (ATM).144.3Relevant test cases.144.4Additional test cases.164.5Modified test cases.165DECT Data Link Control layer (DLC) layer protocol.175.1Additional TPs.175.1.1Additional TPs for C-plane class B procedures.195.1.1.1Test group CA.195.1.1.2Test group BV.215.1.1.3Test group BI.225.1.1.4Test group BO.235.1.2Additional TPs for U-plane LU7 procedures.245.1.2.1Test group BV.245.1.3Additional TPs for U-plane LU8 procedures.245.1.3.1Test group BV.245.2ATM.255.3Relevant test cases.255.4Additional test cases.255.4.1Additional test cases for C-plane class B.255.4.2Additional test cases for U-plane LU7.255.4.3Additional test cases for U-plane LU8.255.5Modified test cases.256DECT MAC layer protocol.266.1Additional TPs.266.1.1Additional TPs for advanced symmetric connections.276.1.2Additional TPs for C-plane switching procedures.276.1.2.1Dynamic switching CF to CS: DIFS initiated.276.1.2.2Dynamic switching CS to CF: DIPS initiated.286.1.2.3Dynamic switching CS to CF: DIFS initiated.286.1.2.4Dynamic switching CSx to CSy: DIFS initiated.296.1.3Additional TPs for U-plane switching procedures.296.1.3.1Connection handover procedure.296.1.3.2Release of part of double slot procedure.306.2ATM.306.3Relevant test cases.306.4Additional test cases.31SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)46.4.1Additional test cases for advanced symmetric connections.316.4.2Additional test cases for C-plane switching procedures.316.4.3Additional test cases for U-plane switching procedures.316.5Modified test cases.327DECT PHL protocol.327.1Additional TPs.327.2ATM.327.3Relevant test cases.327.4Additional test cases.327.5Modified test cases.328ISDN basic access protocols.338.1Applicability of ATS.338.2Additional TPs.338.3ATM.338.4Relevant test cases.339DECT/ISDN IIP profile.349.1Profile TSS.349.1.1Test groups.349.1.1.1Functional modules.349.1.1.2Main test groups.349.1.1.2.1Capability (CA) tests.349.1.1.2.2BV tests.359.1.1.2.3BO tests.359.1.1.2.4BI tests.359.2Profile TPs.359.2.1TP definition conventions.359.2.2TP naming conventions.369.2.3Sources of TP definitions.369.2.4TPs for IWU Link Association Entity.379.2.5TPs for IWU missing resource management.379.2.6TPs for IWU Call Control specific procedures.389.3Profile ATM.389.4Profile untestable TPs.399.5Profile ATS conventions.409.5.1Declarations part naming conventions.409.5.1.1Type and structured type definitions.409.5.1.2Operations definitions.409.5.1.3Parameter declarations.409.5.1.4Selection expression definitions.409.5.1.5Constant declarations.409.5.1.6Test suite variable declarations.419.5.1.7Test case variable declarations.419.5.1.8PCO declarations.419.5.1.9Timer declarations.419.5.1.10ASP type definitions.419.5.1.11PDU type definitions.429.5.1.12Alias definitions.429.5.2Constraints part naming conventions.429.5.3Dynamic part naming conventions.429.5.3.1Test Case identifier.439.5.3.2Test Step identifier.439.5.3.3Default identifier.439.5.3.4General aspects.439.5.3.5ATS abbreviations.449.5.4Declaration part implementation conventions.449.5.5Constraint part implementation conventions.449.5.6Dynamic part implementation conventions.459.5.7Documentation implementation conventions.45SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)59.6Test case and TP mapping.46Annex A (normative):Profile IXIT proforma.47A.1Identification summary.47A.2ATS summary.47A.3Test laboratory.47A.4Client identification.48A.5System Under Test (SUT).48A.6Profile information.49A.6.1NWK layer.49A.6.2DLC layer.51A.6.3MAC layer.53Annex B (normative):Profile Conformance Test Report (Profile CTR) proforma.55B.1Identification summary.55B.1.1Protocol conformance test report.55B.1.2IUT identification.55B.1.3Testing environment.56B.1.4Limits and reservation.56B.1.5Comments.56B.2IUT conformance status.56B.3Static conformance summary.57B.4Dynamic conformance summary.57B.5Static conformance review report.57B.6Test campaign report.58B.7Observations.58Annex C (normative):System Conformance Test Report (SCTR) proforma.59C.1Identification summary.59C.1.1System conformance test report.59C.1.2Test laboratory.59C.1.3Client identification.60C.1.4SUT.60C.1.5Profile identification.60C.1.6Nature of conformance testing.61C.1.7Limits and reservations.61C.1.8Record of agreement.61C.1.9Comments.62C.2System report summary for DECT/ISDN IIP PT.62C.2.1Profile testing summary for DECT NWK layer protocol.62C.2.2Profile testing summary for DECT DLC layer protocol.63C.2.3Profile testing summary for DECT MAC layer protocol.64C.2.4Profile testing summary for DECT PHL protocol.65C.2.5Profile testing summary for ISDN L2, L1 basic access protocol.66C.2.6Profile testing summary for DECT/ISDN IIP Profile.67Annex D (normative):Profile IXIT Requirements List (XRL) proforma.68D.1Profile eXtra Requirement List for IIP - PT part.68D.1.1Parameters for IWU layer.68D.1.2Specific parameters for NWK layer.68D.1.3Specific parameters for DLC layer.69SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)6D.1.4Specific parameters for MAC layer.69Annex E (normative):Modifications of DECT Common Interface (CI) PCTR proforma.70E.1Modifications of DECT NWK layer PCTR proforma.70E.2Modifications of DECT DLC layer PCTR proforma.73E.3Modifications of DECT MAC layer PCTR proforma.76E.4Observations.77Annex F (normative):Abstract Test Suite (ATS) - NWK layer.78F.1The TTCN Graphical form (TTCN.GR).78F.2The TTCN Machine Processable form (TTCN.MP).78Annex G (normative):Abstract Test Suite (ATS) - DLC layer.79G.1The TTCN Graphical form (TTCN.GR).79G.2The TTCN Machine Processable form (TTCN.MP).79Annex H (normative):Abstract Test Suite (ATS) - MAC layer.80H.1The TTCN Graphical form (TTCN.GR).80H.2The TTCN Machine Processable form (TTCN.MP).80Annex J (normative):Abstract Test Suite (ATS) - Interworking Unit (IWU).81J.1The TTCN Graphical form (TTCN.GR).81J.2The TTCN Machine Processable form (TTCN.MP).81History.82SIST EN 301 614-2:2000
ETSIEN 301 614-2 V1.1.2 (1999-02)7Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 2 of a multi-part EN covering the DECT/ISDN interworking for intermediate systemconfiguration, as identified below:Part 1:"Profile Test Specification (PTS) summary";Part 2:"Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)";Part 3:"Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:25 December 1998Date of latest announcement of this EN (doa):31 March 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):30 September 19
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.