SIST EN ISO 8751:2001
(Main)Spring-type straight pins - Coiled, light duty (ISO 8751:1997)
Spring-type straight pins - Coiled, light duty (ISO 8751:1997)
Spiralspannstifte - Leichte Ausführung (ISO 8751:1997)
Diese Internationale Norm beschreibt die Eigenschaften von Spiralspannstiften aus Stahl oder aus austenitischem oder martensitischem nitchrostendem Stahl, leichte Ausführung, mit Nenndurchmessern d1 von 1,5 mm bis einschließlich 8 mm. Anmerkung: Spiralspannstifte in schwerer Ausführung und in Regelausführung werden in ISO 8748 und ISO 8750 behandelt.
Goupilles élastiques spiralées - Série mince (ISO 8751:1997)
La CEI 61754-1:2013 traite des informations générales concernant les interfaces de connecteurs à fibres optiques. Elle comprend des références, des définitions et des règles relatives à la création et à l'interprétation des dessins normalisés. Cette deuxième édition annule et remplace la première édition, parue en 1996, dont elle constitue une révision technique. Cette édition inclut les modifications techniques significatives suivantes par rapport à l'édition précédente:
- reconsidération générale des exigences de performance;
- ajout de la Figure 1 (Exemples de fiche, de raccord et d'embase pour un connecteur).
Mots clés: interfaces de connecteurs à fibres optiques
Spiralno zviti vzmetni zatiči - Lahka izvedba (ISO 8751:1997)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8751:2001
01-julij-2001
6SLUDOQR]YLWLY]PHWQL]DWLþL/DKNDL]YHGED ,62
Spring-type straight pins - Coiled, light duty (ISO 8751:1997)
Spiralspannstifte - Leichte Ausführung (ISO 8751:1997)
Goupilles élastiques spiralées - Série mince (ISO 8751:1997)
Ta slovenski standard je istoveten z: EN ISO 8751:1997
ICS:
21.060.50 =DWLþLåHEOML Pins, nails
SIST EN ISO 8751:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8751:2001
---------------------- Page: 2 ----------------------
SIST EN ISO 8751:2001
---------------------- Page: 3 ----------------------
SIST EN ISO 8751:2001
---------------------- Page: 4 ----------------------
SIST EN ISO 8751:2001
---------------------- Page: 5 ----------------------
SIST EN ISO 8751:2001
---------------------- Page: 6 ----------------------
SIST EN ISO 8751:2001
INTERNATIONAL ISO
STANDARD 8751
Second edition
1997-12-01
Spring-type straight pins — Coiled, light
duty
Goupilles élastiques spiralées — Série mince
A
Reference number
ISO 8751:1997(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 8751:2001
ISO 8751:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 8751 was prepared by Technical Committee
ISO/TC 2, Fasteners.
This second edition cancels and replaces the first edition (ISO 8751:1987),
which has been technically revised.
Annex A of this International Standard is for information only.
© ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
---------------------- Page: 8 ----------------------
SIST EN ISO 8751:2001
©
INTERNATIONAL STANDARD ISO ISO 8751:1997(E)
Spring-type straight pins — Coiled, light duty
1 Scope
This International Standard specifies the characteristics of light duty coiled spring-type straight pins made of
steel or of austenitic or martensitic stainless steel, with nominal diameter, d , from 1,5 mm to 8 mm inclusive.
1
NOTE — Spring-type straight pins, coiled, heavy duty and spring type straight pins, coiled, standard duty, are
the subjects of ISO 8748 and ISO 8750 respectively.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO
maintain registers of currently valid International Standards.
ISO 3269:1988, Fasteners – Acceptance inspection.
1)
ISO 4042:— , Fasteners – Electroplated coatings.
ISO 8749:1986, Pins and grooved pins – Shear test.
3 Dimensions
See figure 1 and table 1.
1) Swaged chamfer at both ends
Figure 1
——————
1) To be published. (Revision of ISO 4042:1989)
1
---
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.