Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material

This standard specifies a procedure for testing the tensile strength and elongation of extruded insulation, sheath and jacket material.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 510: Zugfestigkeit und Reißdehnung von extrudierten Isolierungen, Schutzhüllen und Mänteln

Diese Norm legt ein Verfahren zur Prüfung der Zugfestigkeit und Reißdehnung von extrudierten Isolierungen, Schutzhüllen und Mänteln fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 510: Tenue mécanique et élongation du matériau isolant extrudé, des matériaux du revetement et de la gaine extérieure

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
EN 3475-510:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket materialLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 510: Zugfestigkeit und Reißdehnung von extrudierten Isolierungen, Schutzhüllen und MäntelnSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 510: Tenue mécanique et élongation du matériau isolant extrudé, des matériaux du revetement et de la gaine extérieureAerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-510:2002SIST EN 3475-510:2004en01-maj-2004SIST EN 3475-510:2004SLOVENSKI
STANDARD



SIST EN 3475-510:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-510June 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 510: Tensile strength and elongation of extrudedinsulation, sheath and jacket materialSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 510: Tenuemécanique et élongation du matériau isolant extrudé, desmatériaux du revêtement et de la gaine extérieureLuft- und Raumfahrt - Elektrischen Leitungen für LuftfahrtVerwendung - Prüfverfahren - Teil 510: Zugfestigkeit undReißdehnung von extrudierten Isolierungen, Schutzhüllenund MäntelnThis European Standard was approved by CEN on 20 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-510:2002 ESIST EN 3475-510:2004



EN 3475-510:2002 (E)2ForewordThis document (EN 3475-510:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by Decem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.