Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard

EN 2267-010 specifies the characteristics of UV laser printable electrical lightweight wires DR family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between - 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes 26 to 14 (115/200 V AC). In addition, cables in sizes 12 AWG and larger may be suitable for use at 230/400 V AC in pressurised zones when installed to take account of possible short circuit effects (at the discretion of the user). It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.

Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie Einadrige Leitungen UV-Laser bedruckbar - Produktnorm

In dieser Norm werden die Eigenschaften von UV-Laser-bedruckbaren leichten elektrischen Leitungen der DR-Familie zur Verwendung in Bordnetzen mit 115 V (Phase auf NeutralAußenleiter - Neutralleiter) oder 200 V (Phase auf PhaseAußenleiter - Außenleiter) von Luftfahrzeugen bei Betriebstemperaturen zwischen -65 °C und 260 °C festgelegt. Diese Leitungen sind in den Größen 26 bis 14 (115/200 V) nachweislich lichtbogenfest.
Darüber hinaus sind Leitungen ab Größe 12 AWG zur Verwendung bei 230/400 V in druckbelüfteten Zonen geeignet; bei Installation sind eventuelle Kurzschlüsse zu berücksichtigen (im Ermessen des Anwenders).
Es muss auch möglich sein, diese Kabel mit einer qualifizierten passenden Kennzeichnung zu versehen. Diese Kennzeichnungen müssen die Anforderungen von EN 3838 erfüllen.

Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 010: Famille DR, fil simple marquable au laser UV - Norme de produit

La présente Norme Européenne spécifie les caractéristiques des câbles électriques, marquables au laser UV, légers de la famille DR utilisés dans les systèmes électriques de bord des aéronefs 115 V AC (entre phase et neutre) ou 200 V AC (entre phases) à des températures de fonctionnement comprises entre – 65 °C et 260 °C. Les câbles de taille 26 à 14 ont démontrés leurs résistances aux arcs électriques (115/200 V AC).
De plus les câbles à partir de la taille AWG 12 et au-dessus peuvent être utilisés pour des tensions 230/400 V AC dans les zones pressurisées, leur installation doit tenir compte des effets possibles des courts circuits (à la discrétion des utilisateurs).
Il doit également être possible de marquer ces câbles par un marquage compatible qualifié. Ces marquages doivent répondre aux exigences de l’EN 3838.

Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 010. del: Družina DR, enožilni kabli z možnostjo UV-laserskega tiskanja - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
12-Jan-2014
Withdrawal Date
17-Aug-2017
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Aug-2017
Due Date
09-Sep-2017
Completion Date
18-Aug-2017

Relations

Buy Standard

Standard
EN 2267-010:2014
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ODVHUVNHJDLuft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie Einadrige Leitungen UV-Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 010: Famille DR, fil simple marquable au laser UV - Norme de produitAerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2267-010:2013SIST EN 2267-010:2014en01-februar-2014SIST EN 2267-010:2014SLOVENSKI
STANDARDSIST EN 2267-010:20061DGRPHãþD



SIST EN 2267-010:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2267-010
December 2013 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 010: Famille DR, fil simple marquable au laser UV - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie Einadrige Leitungen UV-Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 28 September 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2267-010:2013 ESIST EN 2267-010:2014



EN 2267-010:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms, definitions, symbols and abbreviations .4 4 Materials and construction .5 5 Required characteristics .6 6 Quality assurance .9 7 Designation .9 8 Identification and marking . 10 9 Packaging, labelling and delivery lengths . 10 10 Technical specification . 10
SIST EN 2267-010:2014



EN 2267-010:2013 (E) 3 Foreword This document (EN 2267-010:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2267-010:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 2267-010:2014



EN 2267-010:2013 (E) 4 1 Scope This European Standard specifies the characteristics of UV laser printable electrical lightweight wires DR family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between − 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes 26 to 14 (115/200 V AC). In addition, cables in sizes 12 AWG and larger may be suitable for use at 230/400 V AC in pressurised zones when installed to take account of possible short circuit effects (at the discretion of the user). It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard EN 2084, Aerospace series — Cables, electric, single-core,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.