oSIST prEN IEC 61347-2-13:2023
(Main)Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic controlgear for LED light sources
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic controlgear for LED light sources
Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillage de lampes - Partie 2-13: Exigences particulières pour les appareillages électroniques alimentés en courant continu ou en courant alternatif pour modules de LED
Stikalne naprave za sijalke - Varnost - 2-13. del: Posebne zahteve za elektronske stikalne naprave za LED-svetlobne vire
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61347-2-13:2023
01-junij-2023
Stikalne naprave za sijalke - Varnost - 2-13. del: Posebne zahteve za elektronske
stikalne naprave za LED-svetlobne vire
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for
electronic controlgear for LED light sources
Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillage de lampes - Partie 2-13: Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou en courant alternatif pour modules de
LED
Ta slovenski standard je istoveten z: prEN IEC 61347-2-13:2023
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
oSIST prEN IEC 61347-2-13:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61347-2-13:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61347-2-13:2023
34C/1576/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61347-2-13 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-31 2023-06-23
SUPERSEDES DOCUMENTS:
34C/1553/CD, 34C/1561A/CC
IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic
controlgear for LED light sources
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 2 34C/1576/CDV
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 3
4 1 Scope . 6
5 2 Normative references. 6
6 3 Terms and definitions . 6
7 4 General requirements . 7
8 5 General notes on tests . 8
9 6 Information and marking . 8
10 6.1 Marking and information . 8
11 6.1.1 Mandatory markings . 8
12 6.1.2 Information to be provided . 8
13 6.2 Durability and legibility of marking . 8
14 6.3 Built-in and integral controlgear . 9
15 7 Terminals . 9
16 8 Earthing . 9
17 9 Protection against accidental contact with hazardous live parts . 9
18 10 Insulation resistance and electric strength . 9
19 11 Fault Conditions . 9
20 12 Construction . 9
21 13 Creepage distances, clearances and distances through insulation . 9
22 14 Screws, current-carrying parts and connections . 9
23 15 Resistance to heat, fire and tracking . 9
24 16 Thermal requirements for controlgear . 10
25 16.1 General . 10
26 16.2 Normal operation . 10
27 16.3 Abnormal operation . 10
28 17 Output working voltage (Uout) . 10
29 18 Rated output characteristics . 11
30 Annex A (normative) Additional requirements for centrally supplied controlgear for
31 emergency lighting . 12
32 A.1 Marking and information . 12
33 A.2 General notes on tests . 12
34 A.3 Operating condition . 12
35 A.4 Supply current . 12
36 A.5 EMC immunity . 13
37 A.6 Pulse voltage from central battery systems . 13
38 A.7 Tests for abnormal conditions . 13
39 A.8 Temperature cycling test and endurance test . 13
40 A.9 Functional safety (EOF ) . 13
x
41 Annex B (informative) Schedule of more onerous requirements . 15
42 Bibliography . 16
43
44 Table A.1 – Pulse voltages . 13
45
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 3 34C/1576/CDV
46 INTERNATIONAL ELECTROTECHNICAL COMMISSION
47 ____________
48
49 CONTROLGEAR FOR ELECTRIC LIGHT SOURCES – SAFETY
50
51 Part 2-13: Particular requirements for
52 electronic controlgear for LED light sources
53
54 FOREWORD
55 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
56 all national electrotechnical committees (IEC National Committees). The object of IEC i s to promote international
57 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
58 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
59 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
60 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
61 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
62 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
63 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
64 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
65 consensus of opinion on the relevant subjects since each technical committee has representatio n from all
66 interested IEC National Committees.
67 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
68 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
69 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
70 misinterpretation by any end user.
71 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
72 transparently to the maximum extent possible in their national and regional publications. Any divergence between
73 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
74 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
75 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
76 services carried out by independent certification bodies.
77 6) All users should ensure that they have the latest edition of this publication.
78 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
79 members of its technical committees and IEC National Committees for any personal injury, property damage or
80 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
81 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
82 Publications.
83 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
84 indispensable for the correct application of this publication.
85 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
86 rights. IEC shall not be held responsible for identifying any or all such patent rights.
87 IEC 61347-2-13 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC
88 technical committee 34: Lighting.
89 This third edition cancels and replaces the second edition published in 2014 and Amendment 1
90 (2016). This edition constitutes a technical revision.
91
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 4 34C/1576/CDV
92 This edition includes the following significant technical changes with respect to the previous
93 edition:
94 a) changes in IEC 61347-1 (see ED 4 of IEC 61347-1)
95 b) alignment with respect to edition 4 of IEC 61347-1:
96 – introduction of dated references as appropriate
97 – deletion of the clauses/subclauses which are either no longer relevant or now covered
98 in part 1
99 c) update of normative references, introducing dated references where appropriate
100 d) scope extension to 1 500 V for DC
101 e) scope clarification
102 f) deletion of unused definitions
103 g) revision of information and marking requirements
104 h) new Marking requirement “LED controlgear”
105 i) new requirements for LED controlgear with constant light output function or programmable
106 current (additions to clauses 3, 6, 13 and 19)
107 j) additional touch current requirements under fault conditions (clause 12)
108 k) addition of requirements for the determination of the output working voltage (new Clause 18)
109 This document is intended to be used in conjunction with IEC 61347-1. Where the requirements
110 of any of the clauses of IEC 61347-1 are referred to in this document by the phrase
111 "IEC 61347-1, Clause n applies", this phrase is interpreted as meaning that all requirements of
112 the clause in question of IEC 61347-1 apply, except any which are clearly inapplicable to the
113 specific type of controlgear covered by this document.
114 A list of all parts in the IEC 61347, published under the general title Controlgear for electric light
115 sources can be found on the IEC website.
116 The text of this International Standard is based on the following documents:
FDIS Report on voting
34C/____/FDIS 34C/____/RVD
117
118 Full information on the voting for the approval of this standard can be found in the report on
119 voting indicated in the above table.
120 The language used for the development of this International Standard is English.
121 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
122 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
123 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
124 described in greater detail at www.iec.ch/publications.
125 The committee has decided that the contents of this document will remain unchanged until the
126 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
127 specific document. At this date, the document will be
128 • reconfirmed,
129 • withdrawn,
130 • replaced by a revised edition, or
131 • amended.
132
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 5 34C/1576/CDV
133 INTRODUCTION
134 This document specifies safety requirements for LED controlgear. However, only those
135 requirements specific to LED controlgear are contained in this document itself. All general
136 requirements, which apply to controlgear for electric light sources in general, regardless of the
137 specific type of light source in question, are contained in Part 1 of IEC 61347. Corresponding
138 general requirements apply to LED controlgear by clause-wise reference in this document to
139 any of the clauses of IEC 61347-1 thereby specifying the extent to which such a clause is
140 applicable and the order in which the tests are to be performed.
141 In the same way, further documents exist specifying individual safety requirements for different
142 type of controlgear related to different type of electric light sources which, together with this
143 document, constitute the IEC 61347-2 series.
144 Any such parts 2 are the leading documents for the safety assessment of the corresponding
145 type of controlgear; it is not IEC 61347-1.
146 Also, all parts 2 of the IEC 61347 series are self-contained and therefore typically do not include
147 references to each other.
148
---------------------- Page: 7 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 6 34C/1576/CDV
149 CONTROLGEAR FOR ELECTRIC LIGHT SOURCES – SAFETY –
150
151 Part 2-13: Particular requirements for
152 electronic controlgear for LED light sources
153
154
155
156
157
158 1 Scope
159 This document specifies safety requirements for electronic controlgear for LED light sources for
160 use on DC supplies up to 1 500 V or on AC supplies up to 1 000 V at 50 Hz or 60 Hz.
161 This document is applicable for controlgear with an output voltage (RMS) not higher than
162 1 000 V.
163 NOTE 1 Control units, such as devices connected between power supply unit and LED light sources that control or
164 adjust the operation of LED light sources, are covered by this document.
165 NOTE 2 Performance requirements are covered by IEC 62384.
166 NOTE 3 Such controlgear can also be used for electric sources producing optical radiation with
167 the same technology used for purposes different than illumination and producing radiation other
168 than visible spectrum.
169 2 Normative references
170 The following documents are referred to in the text in such a way that some or all of their content
171 constitutes requirements of this document. For dated references, only the edition cited applies.
172 For undated references, the latest edition of the referenced document (including any
173 amendments) applies.
174 IEC 60598-1:2020, Luminaires - Part 1: General requirements and tests
1
175 IEC 61347-1:202X , Controlgear for electric light sources – Safety – Part 1: General
176 requirements
177 IEC 61547, Equipment for general lighting purposes – EMC immunity requirements
178 IEC 62384:2020, DC or AC supplied electronic controlgear for LED modules – Performance
179 requirements
180 3 Terms and definitions
1
181 For the purpose of this document, the terms and definitions given in IEC 61347-1:202X , apply,
182 together wit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.