prEN IEC 61347-2-13:2023

Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic controlgear for LED light sources

Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-13: Besondere Anforderungen an elektronische Betriebsgeräte für LED-Lichtquellen

Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2-13: Exigences particulières pour les appareillages électroniques pour les sources de lumière à LED

Stikalne naprave za sijalke - Varnost - 2-13. del: Posebne zahteve za elektronske stikalne naprave za LED-svetlobne vire

General Information

• Status: Not Published
• Publication Date: 21-Oct-2024
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 23-Jun-2023
• Completion Date: 23-Jun-2023
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: oSIST prEN IEC 61347-2-13:2023 - Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic controlgear for LED light sources

Relations

• Revises: EN 61347-2-13:2014/A1:2017 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
• Effective Date: 24-Aug-2021
• Revises: EN 61347-2-13:2014 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
• Effective Date: 19-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61347-2-13:2023
01-junij-2023
Stikalne naprave za sijalke - Varnost - 2-13. del: Posebne zahteve za elektronske
stikalne naprave za LED-svetlobne vire
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for
electronic controlgear for LED light sources
Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillage de lampes - Partie 2-13: Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou en courant alternatif pour modules de
LED
Ta slovenski standard je istoveten z: prEN IEC 61347-2-13:2023
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
oSIST prEN IEC 61347-2-13:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61347-2-13:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61347-2-13:2023
34C/1576/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61347-2-13 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-31 2023-06-23
SUPERSEDES DOCUMENTS:
34C/1553/CD, 34C/1561A/CC

IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
A

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.

TITLE:
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements for electronic
controlgear for LED light sources

PROPOSED STABILITY DATE: 2027

NOTE FROM TC/SC OFFICERS:


Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61347-2-13:2023
IEC CDV 61347-2-13 © IEC 2023 2 34C/1576/CDV

1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 3
4 1 Scope . 6
5 2 Normative references. 6
6 3 Terms and definitions . 6
7 4 General requirements . 7
8 5 General notes on tests . 8
9 6 Information and marking . 8
10 6.1 Marking and information . 8
11 6.1.1 Mandatory markings . 8
12 6.1.2 Information to be provided . 8
13 6.2 Durability and legibility of marking . 8
14 6.3 Built-in and integral controlgear .
...