SIST EN 62386-209:2011

Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (Device Type 8)

This International Standard specifies a protocol and test procedures for the control by digital signals of electronic control gear that can change their light colour.

Digital adressierbare Schnittstelle für die Beleuchtung -- Teil 209: Besondere Anforderungen an Betriebsgeräte - Farbsteuerung (Gerätetyp 8)

Interface d'éclairage adressable numérique -- Partie 209: Exigences particulières pour les appareillages de commande - Commande de la couleur (Type de dispositif 8)

La CEI 62386-209:2011 spécifie un protocole et des procédures d'essai pour la commande par des signaux numériques des appareillages électroniques pouvant modifier la couleur de leur éclairage. La présente publication contient des fichiers joints de type .pdf qui reproduisent les séquences d'essais illustrées dans les Figures 5 à 127. Ces fichiers sont destinés à être utilisés comme complément et ne font pas partie intégrante de la publication.  Cette publication doit être lue conjointement avec la CEI 62386-101:2009 et la CEI 62386-102:2009.

Digitalni naslovljivi vmesnik za razsvetljavo - 209. del: Posebne zahteve za krmilno napravo - Nastavljanje barv (element tipa 8)

Ta mednarodni standard določa protokol in preskusne postopke za nadzor elektronskih krmilnih naprav, ki lahko spreminjajo barvo svetlobe, z digitalnimi signali.

General Information

• Status: Published
• Publication Date: 06-Oct-2011
• ICS: 29.140.50 - Lighting installation systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Sep-2011
• Due Date: 12-Nov-2011
• Completion Date: 07-Oct-2011
• Ref Project: EN 62386-209:2011 - Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62386-209:2011
01-november-2011
Digitalni naslovljivi vmesnik za razsvetljavo - 209. del: Posebne zahteve za krmilno
napravo - Nastavljanje barv (element tipa 8)
Digital addressable lighting interface - Part 209: Particular requirements for control gear -
Colour control (Device Type 8)
Digital adressierbare Schnittstelle für die Beleuchtung -- Teil 209: Besondere
Anforderungen an Betriebsgeräte - Farbsteuerung (Gerätetyp 8)
Interface d'éclairage adressable numérique -- Partie 209: Exigences particulières pour
les appareillages de commande - Commande de la couleur (Type de dispositif 8)
Ta slovenski standard je istoveten z: EN 62386-209:2011
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62386-209:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62386-209:2011

---------------------- Page: 2 ----------------------

SIST EN 62386-209:2011

EUROPEAN STANDARD
EN 62386-209
NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM

ICS 29.140.50; 29.140.99


English version


Digital addressable lighting interface -
Part 209: Particular requirements for control gear -
Colour control (device type 8)
(IEC 62386-209:2011)


Interface d'éclairage adressable Digital adressierbare Schnittstelle für die
numérique - Beleuchtung -
Partie 209: Exigences particulières pour Teil 209: Besondere Anforderungen an
les appareillages de commande - Betriebsgeräte -
Commande de la couleur (Type de Farbsteuerung (Gerätetyp 8)
dispositif 8) (IEC 62386-209:2011)
(CEI 62386-209:2011)





This European Standard was approved by CENELEC on 2011-07-29. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-209:2011 E

---------------------- Page: 3 ----------------------

SIST EN 62386-209:2011
EN 62386-209:2011 - 2 -

Foreword
The text of document 34C/964/FDIS, future edition 1 of IEC 62386-209, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62386-209 on 2011-07-29.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-29
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-07-29
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62386-209:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[1] IEC 60598-1 NOTE  Harmonized as EN 60598-1.
[2] IEC 60669-2-1 NOTE  Harmonized as EN 60669-2-1.
[3] IEC 60921 NOTE  Harmonized as EN 60921.
[4] IEC 60923 NOTE  Harmonized as EN 60923.
[5] IEC 60929 NOTE  Harmonized as EN 60929.
[6] IEC 61347-1 NOTE  Harmonized as EN 61347-1.
[7] IEC 61347-2-3 NOTE  Harmonized as EN 61347-2-3.
[8] IEC 61547 NOTE  Harmonized as EN 61547.
[9] IEC 62384 NOTE  Harmonized as EN 62384.
[10] CISPR 15 NOTE  Harmonized as EN 55015.
__________

---------------------- Page: 4 ----------------------

SIST EN 62386-209:2011
- 3 - EN 62386-209:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 62386-101 2009 Digital addressable lighting interface - EN 62386-101 2009
Part 101: General requirements - System


IEC 62386-102 2009 Digital addressable lighting interface - EN 62386-102 2009
Part 102: General requirements - Control gear


CIE 1931 Commission internationale de l'Eclairage - - -
Proceedings


CIE 17.4 1987 International Lighting Vocabulary - -

---------------------- Page: 5 ----------------------

SIST EN 62386-209:2011

---------------------- Page: 6 ----------------------

SIST EN 62386-209:2011

IEC 62386-209
®

Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Digital addressable lighting interface –
Part 209: Particular requirements for control gear – Colour control (device
type 8)

Interface d’éclairage adressable numérique –
Partie 209: Exigences particulières pour les appareillages de commande –
Commande de la couleur (type de dispositif 8)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XK
ICS 29.140.50; 29.140.99 ISBN 978-2-88912-540-1

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62386-209:2011
– 2 – 62386-209 © IEC:2011
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 11
4 General . 13
4.4 Colour type. 13
4.4.1 General . 13
4.4.2 Colour type: xy-coordinate . 14
4.4.3 Colour type: colour temperature T . 14
c
4.4.4 Colour type: primary N . 15
4.4.5 Colour type: RGBWAF . 15
5 Electrical specification . 16
6 Interface power supply . 16
7 Transmission protocol Structure . 16
8 Timing . 16
9 Method of operation . 16
9.1 Logarithmic dimming curve, arc power levels and accuracy . 16
9.1.1 Colour light output versus arc power level . 16
9.1.2 Direct arc power level . 16
9.1.3 Indirect arc power levels . 17
9.2 Power on . 18
9.2.1 General . 18
9.2.2 Store power on colour . 18
9.2.3 Query power on colour . 18
9.3 Interface-failure . 19
9.3.1 General . 19
9.3.2 Store system failure colour . 19
9.3.3 Query system failure colour . 19
9.4 Min and max level . 20
9.5 Fade time and fade rate . 20
9.6 Reaction to commands during error state . 20
9.9 16 Bit data transfer for the application extended control commands . 20
9.10 Multi colour type control gear . 20
9.11 Colour scenes . 21
9.11.1 General . 21
9.11.2 Store colour scene XXXX . 21
9.11.3 Remove colour scene XXXX . 21
9.11.4 Go to colour scene XXXX . 21
9.11.5 Query colour scene XXXX . 22
9.12 Colour change . 22
9.12.1 Colour type xy-coordinate . 22
9.12.2 Colour type colour temperature T . 22
c
9.12.3 Colour type change . 22
9.12.4 Temporary colour setting . 22

---------------------- Page: 8 ----------------------

SIST EN 62386-209:2011
62386-209 © IEC:2011 – 3 –
9.12.5 Activate colour settings . 23
9.12.6 Reporting colour settings . 26
9.12.7 Copy from report to temporary variables . 26
9.13 Colour temperature T limits . 26
c
10 Declaration of variables . 27
11 Definition of commands . 30
11.1 Arc power control commands. 30
11.1.1 Direct arc power control command . 30
11.1.2 Indirect arc power control commands . 30
11.2 Configuration commands . 31
11.2.1 General configuration commands . 31
11.2.2 Arc power parameters settings . 31
11.2.3 System parameters settings . 32
11.3 Query commands . 32
11.3.1 Queries related to status information . 32
11.3.2 Queries related to arc power parameters settings . 32
11.3.3 Queries related to system parameter settings . 33
11.3.4 Application extended commands . 33
11.4 Special commands . 42
11.4.4 Extended special commands . 42
11.5 Summary of the command set . 42
11.5.1 Summary of the extended application command set . 42
11.5.2 Command versus colour type cross-reference . 43
11.5.3 Command versus the DTR, DTR1 and DTR2 cross-reference table . 44
12 Test procedures . 46
12.2 Test sequences 'Configuration commands' . 46
12.2.1 Test sequences 'General configuration commands'. 46
12.7 Test sequences 'Application extended commands for device type 8' . 66
12.7.1 Test sequences 'APPLICATION EXTENDED QUERY COMMANDS' . 66
12.7.2 Test sequences 'Application extended configuration commands' . 83
12.7.3 Test sequence 'ENABLE DEVICE TYPE' . 157
12.7.4 Test sequences “Application extended control commands” . 160
12.7.5 Test sequences 'Standard application extended commands' . 195
13 General subsequences . 197
13.1 Test sequence “Set16bitValue (val)” . 197
13.2 Test sequence “SetSpecific16bitValue (val)” . 198
13.3 Test sequence “Get16bitValue ( )” . 199
13.4 Test sequence “Get16bitColourValue ( )” . 200
Bibliography . 201

Figure 1 – The CIE color space chromaticity diagram, 1931 Cambridge University
Press . 14
Figure 2 – Black body line . 15
Figure 3 – Colour temperature diagram . 15
Figure 4 – Application extended configuration command sequence example . 36
Figure 5 – Test sequence “RESET” . 47
Figure 6 – Test sequence “testResetDefault (Colour Type)” . 48
Figure 7 – Test sequence “testReset_xy” . 50

---------------------- Page: 9 ----------------------

SIST EN 62386-209:2011
– 4 – 62386-209 © IEC:2011
Figure 8 – Test sequence “testReset_Tc” . 52
Figure 9 – Test sequence “testReset_PrimaryN” . 54
Figure 10 – Test sequence “testReset_RGBWAF” . 56
Figure 11 – Test sequence “testResetNoChange_xy” . 57
Figure 12 – Test sequence “testResetNoChange_Tc” . 59
Figure 13 – Test sequence “testResetNoChange_PrimaryN” . 61
Figure 14 – Test sequence “testResetNoChange_RGBWAF” . 62
Figure 15 – Test sequence “testResetIndependentColourType” . 63
Figure 16 – Test sequence “Save_PrimaryN” . 64
Figure 17 – Test sequence “Restore_PrimaryN (xPrimary, yprimary, TYPrimary” . 65
Figure 18 – Test sequence “QUERY GEAR FEATURES/STATUS” . 66
Figure 19 – Test sequence “QUERY COLOUR STATUS” . 68
Figure 20 – Test sequence “ActivateAndCheck (ColourType, curActive)” . 69
Figure 21 – Test sequence “xyOutOfRangeCheck( )” . 71
Figure 22 – Test sequence “TcOutOfRangeCheck” . 72
Figure 23 – Test sequence “CheckOnlyOneColourTypeActive” . 73
Figure 24 – Test sequence “TcOutOfRangePhysWarmest” . 74
Figure 25 – Test sequence “TcOutOfRangeCheckPhysCoolest” . 75
Figure 26 – Test sequence 'QUERY COLOUR TYPE FEATURES' . 76
Figure 27 – Test sequence 'QUERY COLOUR VALUE' . 79
Figure 28 – Test sequence “QUERY RGBWAF CONTROL” . 81
Figure 29 – test sequence “QUERY ASSIGNED COLOUR” . 82
Figure 30 – Test sequence “STORE TY PRIMARY N” . 84
Figure 31 – Test sequence “CheckDTR2Behaviour8(nrPrim)” . 85
Figure 32 – Test sequence “STORE xy-COORDINATE PRIMARY N” . 87
Figure 33 – Test sequence “CheckDTR2Behaviour_XY(nrPrim)” . 89
Figure 34 – Test sequence “STORE COLOUR TEMPERATURE Tc LIMIT”. 90
Figure 35 – Test sequence “TcCheckDTR2Behaviour( )” . 91
Figure 36 – Test sequence “TcSavePhysicalLimits” . 92
Figure 37 – Test sequence “TcRestorePhysicalLimits(phLimits) . 93
Figure 38 – Test sequence “TcCheckLimits” . 95
Figure 39 – Test sequence “STORE GEAR FEATURES/STATUS” . 96
Figure 40 – Test sequence “AUTOMATIC ACTIVATE” . 97
Figure 41 – Test sequence “AutoActivate_xy (min_level, command, delay,
expected_level)” . 98
Figure 42 – Test sequence “NoAutoActivate_xy (min_level, command, delay,
expected_level)” . 99
Figure 43 – Test sequence “AutoActivate_Tc (min_level, command, delay,
expected_level)” . 100
Figure 44 – Test sequence “NoAutoActivate_Tc (min_level, command, delay,
expected_level)” . 101
Figure 45 – Test sequence “AutoActivate_PrimaryN (min_level, command, delay,
expected_level)” . 102
Figure 46 – Test sequence “NoAutoActivate_PrimaryN (min_level, command, delay,
expected_level)” . 103

---------------------- Page: 10 ----------------------

SIST EN 62386-209:2011
62386-209 © IEC:2011 – 5 –
Figure 47 – Test sequence “AutoActivate_RGBWAF (min_level, command, delay,
expected_level)” . 104
Figure 48 – Test sequence “NoAutoActivate_RGBWAF (min_level, command, delay,
expected_level)” . 105
Figure 49 – Test sequence “AutoActivate_Dapc0” . 106
Figure 50 – Test sequence “AutoActivate_Off” . 107
Figure 51 – Test sequence “Load_xy_Coordinate (point_x, point_y)” . 108
Figure 52 – Test sequence “Get_actual_xy ( )” . 109
Figure 53 – Test sequence “findTwoValid_Tc_Points ( )” . 110
Figure 54 – Test sequence “Load_Tc (Tc_value)” . 111
Figure 55 – Test sequence “Get_actual_Tc ( )” . 112
Figure 56 – Test sequence “findTwoValid_PrimaryN_Points ( )” . 113
Figure 57 – Test sequence “Load_PrimaryN(point_PrimaryN)” . 114
Figure 58 – Test sequence “Get_actual_PrimaryN ( )” . 115
Figure 59 – Test sequence “findTwoValid_RGBWAF_Pionts ( )” . 116
Figure 60 – Test sequence “Load_RGBWAF(point_RGBWAF)” . 117
Figure 61 – Test sequence “Get_actual_RGBWAF ( )” . 118
Figure 62 – Test sequence “ToggleAutoActivation(auto)” . 119
Figure 63 – Test sequence “ASSIGN COLOUR TO LINKED CHANNEL” . 120
Figure 64 – Test sequence “START AUTO CALIBRATION” . 122
Figure 65 – Test sequence “POWER ON COLOUR” . 123
Figure 66 – Test sequence “PowerOnBehaviour_xy” . 125
Figure 67 – Test sequence “PowerOnBehaviour_Tc” . 127
Figure 68 – Test sequence “PowerOnBehaviour_PrimaryN” . 129
Figure 69 – Test sequence “PowerOnBehaviour_RGBWAF” . 131
Figure 70 – Test sequence “PowerOnBehaviourMask_xy” . 132
Figure 71 – Test sequence “PowerOnBehaviourMask_Tc” . 133
Figure 72 – Test sequence “PowerOnBehaviourMask_PrimaryN” . 135
Figure 73 – Test sequence “PowerOnBehaviourMask_RGBWAF” . 137
Figure 74 – Test sequence “SYSTEM FAILURE” . 139
Figure 75 – Test sequence “SystemFailureBehaviour_xy” . 141
Figure 76 – Test sequence “SystemFailureBehaviour_Tc” . 143
Figure 77 – Test sequence “SystemFailureBehaviourPrimaryN” . 145
Figure 78 – Test sequence “SystemFailureBehaviour_RGBWAF” . 147
Figure 79 – Test sequence “SystemFailureBehaviourMask_xy” . 148
Figure 80 – Test sequence “SystemFailureBehaviourMask_Tc” . 149
Figure 81 – Test sequence “SystemFailureBehaviourMask_PrimaryN” . 151
Figure 82 – Test sequence “SystemFailureBehaviourMask_RGBWAF” . 153
Figure 83 – Test sequence “STORE THE DTR AS SCENE XXXX/ GOTO SCENE
XXXX”. 155
Figure 84 – Test sequence “SetTemporaries (col, val)” . 156
Figure 85 – Test sequence “ENABLE DEVICE TYPE: Application extended commands” . 158
Figure 86 – Test sequence “ENABLE DEVICE TYPE: Application extended
configuration commands” . 159

---------------------- Page: 11 ----------------------

SIST EN 62386-209:2011
– 6 – 62386-209 © IEC:2011
Figure 87 – Test sequence “SET TEMPORARY x-COORDINATE” . 160
Figure 88 – Test sequence “SET TEMPORARY y-COORDINATE” . 161
Figure 89 – Test sequence “ACTIVATE” . 162
Figure 90 – Test sequence “FindTwoValid_xy_Points (point1_x, point1_y, point2_x,
point2_y)” . 163
Figure 91 – Test sequence “Goto_xy_Coordinate (Point_x, point_y)” . 164
Figure 92 – Test sequence “x-COORDINATE STEP UP” . 165
Figure 93 – Test sequence “ActivateColourType (Colour Type)” . 166
Figure 94 – Test sequence “x-COORDINATE STEP DOWN” . 167
Figure 95 – Test sequence “Get MainPointxy ( )” . 168
Figure 96 – Test sequence “GetCurrentPointxy ( )” . 169
Figure 97 – Test sequence “xymodeGetMainPointxy ( )” . 170
Figure 98 – Test sequence “SET TEMPORARY COLOUR TEMPERATURE T ” . 171
c
Figure 99 – Test sequence “FindValidTcValue (TcValue)” . 172
Figure 100 – Test sequence “CheckAllTcValues ( )” . 173
Figure 101 – Test sequence “COLOUR TEMPERATURE T STEP COOLER” . 174
c
Figure 102 – Test sequence “COLOUR TEMPERATURE T STEP WARMER” . 175
c
Figure 103 – Test sequence “SET TEMPORARY PRIMARY N DIMLEVEL” . 176
Figure 104 – Test sequence “CheckPrimaryNFadingBehaviour (nPrim)” . 177
Figure 105 – Test sequence “SET TEMPORARY RGB DIMLEVEL” . 178
Figure 106 – Test sequence “CheckRGBFadingBehaviour ( )” . 179
Figure 107 – Test sequence “SET TEMPORARY WAF DIMLEVEL . 180
Figure 108 – Test sequence “CheckWAFFadingBeh
...