SIST EN 60512-16-17:2008

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008)

This part of IEC 60512, when required by the detail specification, is used for testing electomechanical components within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to determine the ability of a fixed male tab and its fixing to withstand specified tensile and compressive forces. If so specified in the detail specification, forces other than tension and compression may be applied.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-17: Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16q: Zug- und Druckfestigkeit von Flachsteckern (IEC 60512-16-17:2008)

Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-17: Essais mécaniques des contacts et des sorties - Essai 16q: Résistance à la traction et à la compression des languettes fixes (CEI 60512-16-17:2008)

La CEI 60512-16-17:2008 détaille une méthode d'essai normalisée pour déterminer l'aptitude d'une patte fixe et de sa fixation à résister à des forces de traction et de compression spécifiées. Si la spécification particulière le stipule, des forces autres que des forces de traction et de compression peuvent être appliquées.

Konektorji za elektronsko opremo - Preskusi in meritve - 16-17. del: Mehanski preskusi na kontaktih in priključkih - Preskus 16q: Natezna in stiskalna trdnost, fiksni moški jezički (IEC 60512-16-17:2008)

General Information

• Status: Published
• Publication Date: 13-Oct-2008
• ICS: 19.060 - Mechanical testing
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Oct-2008
• Due Date: 12-Dec-2008
• Completion Date: 14-Oct-2008
• Ref Project: EN 60512-16-17:2008 - Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-17: Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16q: Zug- und Druckfestigkeit von Flachsteckern (IEC 60512-16-17:2008)Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-17: Essais mécaniques des contacts et des sorties - Essai 16q: Résistance à la traction et à la compression des languettes fixes (CEI 60512-16-17:2008)Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008)31.220.10Plug-and-socket devices. Connectors19.060Mehansko preskušanjeMechanical testingICS:Ta slovenski standard je istoveten z:EN 60512-16-17:2008SIST EN 60512-16-17:2008en,fr,de01-december-2008SIST EN 60512-16-17:2008SLOVENSKI
STANDARD



SIST EN 60512-16-17:2008



EUROPEAN STANDARD EN 60512-16-17 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-16-17:2008 E
ICS 31.220.10
English version
Connectors for electronic equipment -
Tests and measurements -
Part 16-17: Mechanical tests on contacts and terminations -
Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008)
Connecteurs
pour équipements électroniques -
Essais et mesures -
Partie 16-17: Essais mécaniques
des contacts et des sorties -
Essai 16q: Résistance à la traction
et à la compression des languettes fixes (CEI 60512-16-17:2008)
Steckverbinder
für elektronische Einrichtungen -
Mess- und Prüfverfahren -
Teil 16-17: Mechanische Prüfungen
an Kontakten und Anschlüssen -
Prüfung 16q: Zug- und Druckfestigkeit
von Flachsteckern (IEC 60512-16-17:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60512-16-17:2008



EN 60512-16-17:2008 - 2 -
Foreword The text of document 48B/1891/FDIS, future edition 1 of IEC 60512-16-17, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-16-17 on 2008-08-01. This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the structure of the EN 60512 series. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-08-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60512-16-17:2008 was approved by CENELEC as a European Standard without any modification. __________
SIST EN 60512-16-17:2008



- 3 - EN 60512-16-17:2008 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-1-1 - 1) Connectors for electronic equipment - Tests and measurements -
Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 2002 2)
1) Undated reference. 2) Valid edition at date of issue. SIST EN 60512-16-17:2008



SIST EN 60512-16-17:2008



IEC 60512-16-17Edition 1.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment – Tests and measurements – Part 16-17: Mechanical tests on contacts and terminations – Test 16q: Tensile and compressive strength, fixed male tabs
Connecteurs pour équipements électroniques – Essais et mesures – Partie 16-17: Essais mécaniques des contacts et des sorties – Essai 16q: Résistance à la traction et à la compression des languettes fixes
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE GICS 31.220.10 PRICE CODECODE PRIXISBN 2-8318-9885-4
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale SIST EN 60512-16-17:2008



– 2 – 60512-16-17 © IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 16-17: Mechanical tests on contacts and terminations –
Test 16q: Tensile and compressive strength, fixed male tabs
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indi
...