SIST EN ISO 15877-5:2009/A1:2011

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)

This part of ISO 15877 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1 of ISO 15877-1:2009). This part of ISO 15877 covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of ISO 15877-1:2009, this part of ISO 15877 does not apply. It also specifies the test parameters for the test methods referred to in this part of ISO 15877. In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes, fittings, their joints and joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15877-5:2009/AMD 1:2010)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15877-5:2009/AMD 1:2010)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 5. del: Ustrezanje zahtevam za uporabnost sistema - Dopolnilo 1 (ISO 15877-5:2009/AMD 1:2010)

Ta del ISO 15877 določa značilnosti fitingov iz kloriranega polivinilklorida (PVC-C) za cevne sisteme, namenjene uporabi za napeljave z vročo in hladno vodo v stavbah za prenos pitne ali nepitne vode (domači sistemi) in za grelne sisteme pod računskimi tlaki in pri temperaturah v skladu z razredom uporabe (glej preglednico 1 iz ISO 15877-1:2009). Ta del ISO 15877 zajema razpon pogojev delovanja (razrede uporabe) in razrede računskega tlaka. Za vrednosti TD, Tmax in Tmal, ki so višje od tistih v preglednici 1 iz ISO 15877-1:2009, ta del ISO 15877 ne velja. Prav tako določa preskusne parametre za preskusne metode, navedene v tem delu ISO 15877. Skupaj z drugimi deli ISO 15877 velja za PVC-C pipe, fitinge, njihove spoje in spoje s komponentami iz drugih polimernih materialov in materialov, ki niso polimerni, namenjeni uporabi za napeljave z vročo in hladno vodo.

General Information

• Status: Published
• Public Enquiry End Date: 19-Oct-2009
• Publication Date: 06-Feb-2011
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Dec-2010
• Due Date: 11-Feb-2011
• Completion Date: 07-Feb-2011
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 15877-5:2009/A1:2010 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)

Relations

• Amends: SIST EN ISO 15877-5:2009 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)
• Effective Date: 01-Mar-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15877-5:2009/A1:2011
01-marec-2011
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG39&&GHO8VWUH]DQMH]DKWHYDP]DXSRUDEQRVW
VLVWHPD'RSROQLOR,62$0'
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877
-5:2009/AMD 1:2010)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15877-
5:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système -
Amendement 1 (ISO 15877-5:2009/AMD 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15877-5:2009/A1:2010
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-5:2009/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15877-5:2009/A1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 15877-5:2009/A1:2011


EUROPEAN STANDARD
EN ISO 15877-5:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 91.140.60; 23.040.20
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for
purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD
1:2010)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de
Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du C) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung
système - Amendement 1 (ISO 15877-5:2009/AMD 1:2010) 1 (ISO 15877-5:2009/AMD 1:2010)
This amendment A1 modifies the European Standard EN ISO 15877-5:2009; it was approved by CEN on 31 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-5:2009/A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15877-5:2009/A1:2011
EN ISO 15877-5:2009/A1:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15877-5:2009/A1:2011
EN ISO 15877-5:2009/A1:2010 (E)
Foreword
This document (EN ISO 15877-5:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This Amendment to the European Standard EN ISO 15877-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and
conflicting national standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15877-5:2009/A1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 15877-5:2009/A1:2011

INTERNATIONAL ISO
STANDARD 15877-5
Second edition
2009-03-15
AMENDMENT 1
2010-11-01


Plastics piping systems for hot and cold
water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) —
...