SIST EN ISO 15876-5:2017/A1:2021

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten (PB) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15876-5:2017/Amd 1:2020)

No scope available

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15876-5:2017/Amd 1:2020)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polibuten (PB) - 5. del: Ustreznost sistema namenu - Dopolnilo A1 (ISO 15876-5:2017/Amd 1:2020)

General Information

• Status: Published
• Public Enquiry End Date: 19-Apr-2020
• Publication Date: 20-Jan-2021
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Jan-2021
• Due Date: 14-Mar-2021
• Completion Date: 21-Jan-2021
• Ref Project: EN ISO 15876-5:2017/A1:2020 - Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)

Relations

• Amends: SIST EN ISO 15876-5:2017 - Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
• Effective Date: 01-Feb-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15876-5:2017/A1:2021
01-februar-2021
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Polibuten (PB) - 5. del: Ustreznost sistema namenu - Dopolnilo A1 (ISO 15876-
5:2017/Amd 1:2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5:
Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten
(PB) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15876-5:2017/Amd
1:2020)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polybutène (PB) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15876-
5:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 15876-5:2017/A1:2020
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15876-5:2017/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15876-5:2017/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 15876-5:2017/A1:2021


EN ISO 15876-5:2017/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2020
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.60
English Version

Plastics piping systems for hot and cold water installations
- Polybutene (PB) - Part 5: Fitness for purpose of the
system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polybutène (PB) - Kaltwasserinstallation - Polybuten (PB) - Teil 5:
Partie 5: Aptitude à l'emploi du système - Amendement Gebrauchstauglichkeit des Systems - Änderung 1 (ISO
1 (ISO 15876-5:2017/Amd 1:2020) 15876-5:2017/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 15876-5:2017; it was approved by CEN on 12 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15876-5:2017/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15876-5:2017/A1:2021
EN ISO 15876-5:2017/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15876-5:2017/A1:2021
EN ISO 15876-5:2017/A1:2020 (E)
European foreword
This document (EN ISO 15876-5:2017/A1:2020) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15876-5:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15876-5:2017/Amd 1:2020 has been approved by CEN as EN ISO 15876-
5:2017/A1:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 15876-5:2017/A1:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 15876-5:2017/A1:2021
INTERNATIONAL ISO
STANDARD 15876-5
Second edition
2017-01
AMENDMENT 1
2020-12
Plastics piping systems for hot
and cold water installations —
Polybutene (PB) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polybutène (PB) —
Partie 5: Aptitude à l
...

SLOVENSKI STANDARD
SIST EN ISO 15876-5:2017/oprA1:2020
01-april-2020
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Polibuten (PB) - 5. del: Ustreznost sistema namenu - Dopolnilo A1 (ISO 15876-
5:2017/DAM 1:2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5:
Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/DAM 1:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten
(PB) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15876-5:2017/DAM
1:2020)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polybutène (PB) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15876-
5:2017/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 15876-5:2017/prA1
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15876-5:2017/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15876-5:2017/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 15876-5:2017/oprA1:2020
DRAFT AMENDMENT
ISO 15876-5:2017/DAM 1
ISO/TC 138/SC 2 Secretariat: SNV
Voting begins on: Voting terminates on:
2020-02-19 2020-05-13
Plastics piping systems for hot and cold water
installations — Polybutene (PB) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 1
ICS: 91.140.60; 23.040.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 15876-5:2017/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
SIST EN ISO 15876-5:2017/oprA1:2020
ISO 15876-5:2017/DAM 1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
SIST EN ISO 15876-5:2017/oprA1:2020
ISO 15876-5:2017/DAM 1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended
...