SIST EN ISO 15875-5:2004/A1:2021

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes Polyethylen (PE-X) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15875-5:2003/Amd 1:2020)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15875-5:2003/Amd 1:2020)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Zamreženi polietilen (PE-X) - 5. del: Ustreznost sistema namenu - Dopolnilo A1 (ISO 15875-5:2003/Amd 1:2020)

General Information

• Status: Published
• Public Enquiry End Date: 19-Apr-2020
• Publication Date: 21-Jan-2021
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Jan-2021
• Due Date: 14-Mar-2021
• Completion Date: 22-Jan-2021
• Ref Project: EN ISO 15875-5:2003/A1:2020 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)

Relations

• Amends: SIST EN ISO 15875-5:2004 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
• Effective Date: 01-Feb-2021
• Revises: oSIST prEN ISO 15875-5:2024 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO/DIS 15875-5:2024)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2021
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Zamreženi polietilen (PE-X) - 5. del: Ustreznost sistema namenu - Dopolnilo A1
(ISO 15875-5:2003/Amd 1:2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene
(PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-
5:2003/Amd 1:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes
Polyethylen (PE-X) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO
15875-5:2003/Amd 1:2020)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthylène réticulé (PE-X) - Partie 5: Aptitude à l'emploi du système - Amendement 1
(ISO 15875-5:2003/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 15875-5:2003/A1:2020
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15875-5:2003/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Crosslinked polyethylene (PE-X) - Part 5: Fitness for
purpose of the system - Amendment 1 (ISO 15875-
5:2003/Amd 1:2020)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polyéthylène Kaltwasserinstallation - Vernetztes Polyethylen (PE-X)
réticulé (PE-X) - Partie 5: Aptitude à l'emploi du - Teil 5: Gebrauchstauglichkeit des Systems - Änderung
système - Amendement 1 (ISO 15875-5:2003/Amd 1 (ISO 15875-5:2003/Amd 1:2020)
1:2020)
This amendment A1 modifies the European Standard EN ISO 15875-5:2003; it was approved by CEN on 12 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15875-5:2003/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15875-5:2003/A1:2020) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15875-5:2003 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15875-5:2003/Amd 1:2020 has been approved by CEN as EN ISO 15875-
5:2003/A1:2020 without any modification.

INTERNATIONAL ISO
STANDARD 15875-5
First edition
2003-12-01
AMENDMENT 1
2020-12
Plastics piping systems for hot and
cold water installations — Crosslinked
polyethylene (PE-X) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polyéthylène réticulé (PE-X) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 1
Reference number
ISO 15875-5:2003/Amd.1:2020(E)
©
ISO 2020
ISO 15875-5:2003/Amd.1:2020(E)

© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 15875-5:2003/Amd.1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
commi
...