oSIST prEN 15685:2011
(Main)Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates
This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated multipoint locks and their locking plates for use in doors in buildings.
This European Standard covers multipoint locks which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and subsequently placed on the market as a kit in a single transaction.
This standard specifies Multipoint locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades.
This European standard does not specify single point locks or their locking plates which are specified by EN 12209.
This standard specifies the dimensions and properties required for security and for the assessment of smoke door suitability.
This European standard is not applicable to cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
Assessment of the contribution of the product to the fire resistance of specific fire/smoke resisting door assemblies is beyond the scope of this European Standard.
Schlösser und Baubeschläge - Mehrfachverriegelungen und deren Schließbleche - Anforderungen und Prüfverfahren
Die vorliegende Europäische Norm legt Anforderungen an und Prüfverfahren für die Dauerfunktionstüchtig-keit, Festigkeit, Schutzwirkung und Wirkungsweise von mechanisch betätigten Mehrfachverriegelungen und deren Schließbleche fest, die in Türen von Gebäuden zum Einsatz kommen.
Die vorliegende Europäische Norm deckt Mehrfachverriegelungen ab, die entweder in ihrer Gesamtheit durch einen Hersteller gefertigt und in den Handel gebracht werden oder durch mehr als einen Hersteller aus Baugruppen montiert und anschließend in einem Geschäftsabschluss als Bausatz in den Handel gelangen.
Die vorliegende Norm trifft Festlegungen für Mehrfachverriegelungen, die für den Einsatz in unterschiedlichen Umgebungs- und Sicherheitsbedingungen vorgesehen sind und folglich unterschiedliche Güteklassen erfordern.
Die vorliegende Europäische Norm trifft keine Festlegungen für Schlösser und deren Schließbleche mit Einfachverriegelung, die durch EN 12209 behandelt werden.
Die vorliegende Norm legt die für die Schutzwirkung und Beurteilung der Eignung für Rauchschutztüren erforderlichen Maße und Eigenschaften fest.
Die vorliegende Europäische Norm gilt nicht für Schließzylinder, Türdrücker, Fensterriegel, Vorhänge-schlösser, Tresorschlösser, Möbelschlösser oder Gefängnisschlösser.
Die Beurteilung des Produktbeitrags zum Feuerwiderstand der spezifischen feuer /rauchbeständigen Türen-einheit gehört nicht zum Anwendungsbereich der vorliegenden Europäischen Norm.
Quincaillerie pour le bâtiment - Serrures multipoints et leurs gâches - Prescriptions et méthodes d'essais
La présente Norme européenne spécifie les exigences et les méthodes d'essai relatives à l'endurance, la résistance, la sécurité et la fonctionnalité des serrures mécaniques multipoints et de leurs gâches destinées à être utilisées sur des portes dans des bâtiments.
La présente Norme européenne couvre les serrures multipoints fabriquées et mises sur le marché dans leur intégralité par un seul fabricant, ou assemblées à partir de sous-ensembles produits par plusieurs fabricants et mises ultérieurement sur le marché sous forme d'un kit faisant l'objet d'une seule transaction.
La présente norme spécifie les serrures multipoints et les systèmes de verrouillage destinés à être utilisés dans différentes conditions de sécurité et d'environnement, et nécessitant donc différents grades.
La présente Norme européenne ne spécifie pas de serrures monopoints ou leurs gâches objets de l'EN 12209.
La présente norme spécifie les dimensions et propriétés requises pour la sécurité et pour l'évaluation de l'aptitude pour l'utilisation sur des portes pare-fumée.
La présente Norme européenne ne s'applique pas aux cylindres, béquilles, serrures pour fenêtres, cadenas, serrures assurant la sécurité des personnes, serrures de meubles ou serrures de prison.
L'évaluation de la contribution du produit à la résistance au feu de blocs-portes coupe-feu/pare-fumée spécifiques ne relève pas du domaine d'application de la présente Norme européenne.
Stavbno okovje - Zahteve in preskusne metode - Večtočkovne ključavnice, zapahi in varovalne podložke
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2011
6WDYEQRRNRYMH=DKWHYHLQSUHVNXVQHPHWRGH9HþWRþNRYQHNOMXþDYQLFH]DSDKL
LQYDURYDOQHSRGORåNH
Building hardware - Requirements and test methods - Multipoint locks, latches and
locking plates
Schlösser und Baubeschläge - Mehrfachverriegelungen und deren Schließbleche -
Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Serrures multipoints et leurs gâches - Prescriptions et
méthodes d'essais
Ta slovenski standard je istoveten z: prEN 15685
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
DRAFT
prEN 15685
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 91.190
English Version
Building hardware - Requirements and test methods - Multipoint
locks, latches and locking plates
Quincaillerie pour le bâtiment - Serrures multipoints et leurs Schlösser und Baubeschläge - Mehrfachverriegelungen
gâches - Prescriptions et méthodes d'essais und deren Schließbleche - Anforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15685:2011: E
worldwide for CEN national Members.
prEN 15685:2011 (E)
Contents Page
Foreword . 5
Introduction . 6
1 Scope. 7
2 Normative reference . 7
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions . 7
4 Classification . 11
4.1 General . 11
4.2 Classification for mechanically operated multipoint locks and locking plates . 11
5 Requirements . 15
5.1 General . 15
5.2 Category of use . 17
5.3 Durability requirements . 21
5.4 Door mass and closing force . 22
5.5 Suitability for use on fire/smoke doors . 22
5.6 Safety. 22
5.7 Corrosion resistance and temperature . 22
5.8 Security . 23
5.9 Anti-separation requirements . 28
5.10 Clenching . 30
5.11 Key identification requirements of lever locks . 31
6 Test methods . 31
6.1 General . 31
6.2 Category of use . 34
6.3 Durability tests . 36
6.4 Door mass and closing force . 40
6.5 Suitability for use on fire/smoke doors . 41
6.6 Safety. 41
6.7 Corrosion resistance and temperature . 41
6.8 Security tests . 42
6.9 Test of Anti-separation requirements . 48
6.10 Clenching . 51
6.11 Key identification of lever locks . 51
7 Marking . 52
8 Evaluation of conformity . 53
8.1 Initial type test . 53
8.2 Sampling, testing and conformity criteria . 54
8.3 Factory production control . 55
8.4 Periodic testing . 59
8.5 Annual testing . 59
Annex A (normative) Multipoint locks for use on fire / smoke doors . 60
Annex B (normative) Test sampling and sequencing . 62
Annex C (normative) Product information sheet . 65
Annex ZA (informative) Clauses of this European Standard addressing the provisions of
the EU Construction Products Directive (89/106/EEC) . 66
prEN 15685:2011 (E)
Bibliography . 72
Figures
Figure 1 — Return force of latch bolts . 16
Figure 2 — Screw head not allowed in security from inside . 17
Figure 3 — Resistance to side load on latch bolt. 17
Figure 4 — Torque to operate the lock with the key . 18
Figure 5 — Torque to operate the lock with the follower . 18
Figure 6 — Torque to operate the clenching with the key . 19
Figure 7 — Torque to operate the clenching with the follower . 19
Figure 8 — Strength of follower stops . 20
Figure 9 — Torque resistance of lockable follower . 20
Figure 10 — Torque resistance of lockable follower . 23
Figure 11 — Resistance to sideload . 24
Figure 12 — Locking point bolt projection . 25
Figure 13 — Resistance to load on box protected locking plate. 26
Figure 14 — Strong key attack on lever lock . 27
Figure 15 — Resistance to pulling of anti-separation point . 28
Figure 16 — Resistance to disengaging . 29
Figure 17 — Clenching . 30
Figure 18 — Strength of bolt action . 33
Figure 19 — Resistance to side load on latch bolt with and without support and tool for resistance to
side load on latch bolt . 35
Figure 20 — Torque resistance of lockable follower . 36
Figure 21 — Durability of latch action with force applied . 38
Figure 22 — Durability of locking action . 39
Figure 23 — Durability of clenching action . 40
Figure 24 — Door closing force . 41
Figure 25 - Side load on locking point, supported and unsupported . 44
Figure 26 — Drilling machine . 45
Figure 27 — Resistance to disengaging load on locking point, supported and unsupported . 46
prEN 15685:2011 (E)
Figure 28 — End load on box protected locking plate . 47
Figure 29 — Resistance to side load on locking plate . 47
Figure 30 — Resistance to pulling of anti-separation device . 48
Figure 31 — Resistance to disengaging of anti-separation device. 49
Figure 32 — Resistance to pulling on locking plate for the anti-separation device . 50
Figure 33 — Resistance to lifting force on locking plate . 51
Figure ZA.1 — Example of CE marking for a multipoint locks . 70
Tables
Table 1 — Classification . 11
Table 2 — Category of use . 21
Table 3 — Durability requirements . 22
Table 4 — Security requirements . 27
Table 5 — Anti-separation requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.