SIST EN 62631-3-3:2016
(Main)Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
This part of IEC 62631 covers methods of test for the determination of the insulation
resistance of electrical insulating materials or insulating systems by applying DC voltage.
Dielektrische und resistive Eigenschaften fester Isolierstoffe - Teil 3-3: Bestimmung resistiver Eigenschaften (Gleichspannungsverfahren) – Isolationswiderstand
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-3: Détermination des propriétés résistives (Méthodes en courant continu) - Résistance d'isolement
L'IEC 62631-3-3:2015 couvre des méthodes d'essai pour déterminer la résistance d'isolement des matériaux isolants électriques ou des systèmes d'isolation en appliquant une tension continue. Cette première édition annule et remplace la première édition de l'IEC 60167 parue en 1964 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à la première édition de l'IEC 60167:
a) l'IEC 60167 a été entièrement révisée tant au plan rédactionnel que technique et insérée dans la nouvelle série IEC 62631;
b) les méthodes d'essai ont été adaptées à l'état actuel de la technique.
Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-3. del: Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Izolacijska upornost
Ta del standarda IEC 62631 obravnava preskusne metode za ugotavljanje izolacijske upornosti elektroizolacijskih materialov ali izolacijskih sistemov z uporabo enosmernega toka.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62631-3-3:2016
01-maj-2016
1DGRPHãþD
SIST HD 568 S1:1998
'LHOHNWULþQHLQXSRURYQHODVWQRVWLWUGQLKL]RODFLMVNLKPDWHULDORYGHO
8JRWDYOMDQMHXSRURYQLKODVWQRVWLPHWRGH]HQRVPHUQLPWRNRP,]RODFLMVND
XSRUQRVW
Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of
resistive properties (DC Methods) - Insulation resistance
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-3:
Détermination des propriétés résistives (Méthodes en courant continu) - Résistance
d'isolement
Ta slovenski standard je istoveten z: EN 62631-3-3:2016
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN 62631-3-3:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62631-3-3:2016
---------------------- Page: 2 ----------------------
SIST EN 62631-3-3:2016
EUROPEAN STANDARD EN 62631-3-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2016
ICS 17.220.99; 29.035.01 Supersedes HD 568 S1:1990
English Version
Dielectric and resistive properties of solid insulating materials -
Part 3-3: Determination of resistive properties (DC Methods) -
Insulation resistance
(IEC 62631-3-3:2015)
Propriétés diélectriques et résistives des matériaux isolants Dielektrische und resistive Eigenschaften fester Isolierstoffe
solides - Partie 3-3: Détermination des propriétés résistives - Teil 3-3: Bestimmung resistiver Eigenschaften
(Méthodes en courant continu) - Résistance d'isolement (Gleichspannungsmethoden) - Isolationswiderstand
(IEC 62631-3-3:2015) (IEC 62631-3-3:2015)
This European Standard was approved by CENELEC on 2016-01-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62631-3-3:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62631-3-3:2016
EN 62631-3-3:2016
European foreword
The text of document 112/341/FDIS, future edition 1 of IEC 62631-3-3, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62631-3-3:2016.
The following dates are fixed:
(dop) 2016-10-08
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-01-08
standards conflicting with the
document have to be withdrawn
This document supersedes HD 568 S1:1990.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62631-3-3:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
1)
IEC 62631-3-1 NOTE Harmonized as EN 62631-3-1 .
IEC 62631-3-2 NOTE Harmonized as EN 62631-3-2.
1) To be published.
2
---------------------- Page: 4 ----------------------
SIST EN 62631-3-3:2016
EN 62631-3-3:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60212 - Standard conditions for use prior to and EN 60212 -
during the testing of solid electrical
insulating materials
IEC 60216-4-1 - Electrical insulating materials - Thermal EN 60216-4-1 -
endurance properties -- Part 4-1: Ageing
ovens - Single-chamber ovens
ISO 2339 - EN 22339 -
ISO 3465 - Hand taper pin reamers - -
3
---------------------- Page: 5 ----------------------
SIST EN 62631-3-3:2016
---------------------- Page: 6 ----------------------
SIST EN 62631-3-3:2016
IEC 62631-3-3
®
Edition 1.0 2015-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dielectric and resistive properties of solid insulating materials –
Part 3-3: Determination of resistive properties (DC methods) – Insulation
resistance
Propriétés diélectriques et résistives des matériaux isolants solides –
Partie 3-3: Détermination des propriétés résistives (méthodes en courant
continu) – Résistance d'isolement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.99; 29.035.01 ISBN 978-2-8322-3024-4
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62631-3-3:2016
– 2 – IEC 62631-3-3:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Significance . 8
5 Method of test . 9
5.1 General . 9
5.2 Test conditions . 9
5.2.1 Voltage . 9
5.2.2 Electrode material . 9
5.3 Equipment . 10
5.3.1 General . 10
5.3.2 Accuracy . 10
5.3.3 Voltage source . 10
5.4 Calibration . 10
5.5 Test specimen . 11
5.5.1 Dimensions of test specimen . 11
5.5.2 Test specimen for insulating resistance between tapered pin electrodes . 11
5.5.3 Test specimen for insulating resistance between bar electrodes . 11
5.5.4 Manufacturing of test specimen . 11
5.5.5 Number of test specimen . 12
5.5.6 Conditioning and pre-treatment of test specimen . 12
5.6 Electrode application . 12
5.6.1 Application of tapered pin electrodes . 12
5.6.2 Application of bar electrodes . 13
5.7 Test procedure . 14
5.8 Evaluation . 14
5.8.1 Insulating resistance between tapered pin electrodes . 14
5.8.2 Insulating resistance between bar electrodes . 14
6 Test report . 14
7 Repeatability and reproducibility . 15
Bibliography . 16
Figure 1 – Pin electrode arrangements . 6
Figure 2 – Bar electrode arrangement . 7
Figure 3 – Specimen for measurement of the insulation resistance R between plugs . 13
I
Table 1 – Composition of electrode steel . 10
---------------------- Page: 8 ----------------------
SIST EN 62631-3-3:2016
IEC 62631-3-3:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –
Part 3-3: Determination of resistive properties (DC methods) –
Insulation resistance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62631-3-3 has been prepared by IEC technical committee 112:
Evaluation and qualification of electrical insulating materials and systems.
This first edition cancels and replaces the first edition of IEC 60167, published in 1964, and
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the first
edition of IEC 60167:
a) IEC 60167 has been completely revised, both editorially and technically, and incorporated
into the new IEC 62631 series;
b) test methods have been updated to current day state of the art.
---------------------- Page: 9 ----------------------
SIST EN 62631-3-3:2016
– 4 – IEC 62631-3-3:2015 © IEC 2015
The text of this standard is based on the following documents:
FDIS Report on voting
112/341/FDIS 112/352/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62631 series, published under the general title Dielectric and
resistive properties of solid insulating materials, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN 62631-3-3:2016
IEC 62631-3-3:2015 © IEC 2015 – 5 –
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –
Part 3-3: Determination of resistive properties (DC methods) –
Insulation resistance
1 Scope
This part of IEC 62631 covers methods of test for the determination of the insulation
resistance of electrical insulating materials or insulating systems by applying DC voltage.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60212, Standard conditions for use prior to and during the testing of solid electrical
insulating materials
IEC 60216-4-1, Electrical insulating materials − Thermal endurance properties – Part 4-1:
− Single-chamber ovens
Ageing ovens
ISO 2339, Taper pins, unhardened
ISO 3465, Hand taper pin reamers
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
electrode arrangement
arrangement of two electrically conductive bodies in contact with the surface and the bulk
volume of a test specimen
3.1.1
tapered pin electrodes
electrode arrangement using tapered pin electrodes
Note 1 to entry: See Figure 1.
3.1.2
bar electrodes
electrode arrangement using bar electrodes
Note 1 to entry: See Figure 2.
---------------------- Page: 11 ----------------------
SIST EN 62631-3-3:2016
– 6 – IEC 62631-3-3:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.