SIST EN 546-2:2007
(Main)Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties
This document specifies the mechanical properties of wrought aluminium and aluminium alloy foil.
The chemical composition limits of these materials are specified in EN 573-3.
The designations of aluminium and aluminium alloys and the temper designations used in this standard are specified in EN 573-3 and the temper designation are defined EN 515.
Aluminium und Aluminiumlegierungen - Folien - Teil 2: Mechanische Eigenschaften
Diese Europäische Norm legt die mechanischen Eigenschaften für Folien aus Aluminium und Aluminium-Knetlegierungen fest.
Die chemische Zusammensetzung dieser Werkstoffe ist in EN 573-3 angegeben.
Die in dieser Norm verwandten Bezeichnungen für Aluminium und Aluminiumlegierungen sind in EN 573 3 und EN 573 4 festgelegt und die Bezeichnungen der Werkstoffzustände in EN 515 definiert.
ANMERKUNG Einige in der vorliegenden Norm aufgeführte Erzeugnisse können Gegenstand eines Patents oder von Patentanmeldungen sein. Ihre Auflistung in dieser Norm bedeutet aber keinesfalls, dass dadurch eine Lizenzübertragung unter diesem Patentrecht erfolgt.
CEN/TC 132 bekräftigt seine Vorgehensweise, dass in dem Fall, wenn ein Patentinhaber sich weigert, für genormte Erzeugnisse Lizenzen unter angemessenen und nicht diskriminierenden Bedingungen zu erteilen, dieses Erzeugnis aus der entsprechenden Norm entfernt werden muss.
Aluminium et alliages d'aluminium - Feuille mince - Partie 2 : Caractéristiques mécaniques
Cette Norme européenne spécifie les caractéristiques mécaniques des feuilles minces en aluminium et alliages d'aluminium corroyés.
La composition chimique de ces matériaux est spécifiée dans l’EN 573-3.
Les désignations de l'aluminium et des alliages d'aluminium ainsi que la désignation des états métallurgiques utilisées dans la présente norme sont respectivement spécifiées dans l'EN 573-3 et l'EN 515.
Aluminij in aluminijeve zlitine - Folija - 2. del: Mehanske lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 546-2:2007
01-marec-2007
1DGRPHãþD
SIST EN 546-2:1998
Aluminij in aluminijeve zlitine - Folija - 2. del: Mehanske lastnosti
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Folien - Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Feuille mince - Partie 2 : Caractéristiques
mécaniques
Ta slovenski standard je istoveten z: EN 546-2:2006
ICS:
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 546-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 546-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 77.150.10 Supersedes EN 546-2:1996
English Version
Aluminium and aluminium alloys - Foil - Part 2: Mechanical
properties
Aluminium et alliages d'aluminium - Feuille mince - Partie 2 Aluminium und Aluminiumlegierungen - Folien - Teil 2:
: Caractéristiques mécaniques Mechanische Eigenschaften
This European Standard was approved by CEN on 25 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 546-2:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 546-2:2006 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Tensile testing.4
4 Mechanical properties.5
5 Rounding of test results .5
Annex A (normative) Rules for rounding.8
Bibliography .9
Figures
Figure 1 — Parallel sided test piece .4
Figure 2 — Example of double-bladed cutter .5
Tables
Table 1 — Longitudinal mechanical properties for converter/household foil.6
a
Table 2 — Longitudinal mechanical properties for container foil .7
2
---------------------- Page: 3 ----------------------
EN 546-2:2006 (E)
Foreword
This document (EN 546-2:2006) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at
the latest by June 2007.
This document supersedes EN 546-2:1996.
Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 6 "Foil and
finstock" to revise EN 546-2:1996.
The following modifications have been made:
Clause 4: Table 1 and Table 2 amended. Alloy EN AW-8021B added in Table 1.
EN 546 comprises the following parts under the general title "Aluminium and aluminium alloys - Foil":
Part 1: Technical conditions for inspection and delivery
Part 2: Mechanical properties
Part 3: Tolerances on dimensions
Part 4: Special property requirements
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licenses on standardised
standard products under reasonable and not discriminatory conditions, then this product shall be removed
from the corresponding standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
3
---------------------- Page: 4 ----------------------
EN 546-2:2006 (E)
1 Scope
This document specifies the mechanical properties of wrought aluminium and aluminium alloy foil.
The chemical composition limits of these materials are specified in EN 573-3.
The designations of aluminium and aluminium alloys and the temper designations used in this standard are
specified in EN 573-3 and the temper designation are defined EN 515.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 546-1, Aluminium and aluminium alloys — Foil — Part 1: Technical conditions for inspection and delivery
3 Tensile testing
The selection and number of specimens and test pieces shall be as specified in EN 546-1. Pre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.