SIST EN 300 220-2 V2.4.1:2012
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
The present document applies to the following Short Range Device major equipment types:
1) Non-specific Short Range Devices.
2) Alarms, identification systems, radio-determination, telecommand, telemetry, etc.
3) Radio Frequency Identification (RFID).
4) Detection, movement and alert applications.
These radio equipment types are capable of operating in the frequency bands within the 25 MHz to 1 000 MHz range as specified in table 1:
either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
for all types of modulation; with or without speech.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Naprave kratkega dosega (SRD) - Radijska oprema, ki se uporablja v frekvenčnem območju od 25 MHz do 1000 MHz z močnostnimi nivoji do največ 500 mW - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument se uporablja za naslednje vrste glavne opreme naprav kratkega dosega:
1) nespecifične naprave kratkega dosega;
2) alarmi, sistemi za identifikacijo, radijsko določanje, daljinsko vodenje, telemetrija itd.;
3) radiofrekvenčna identifikacija (RFID);
4) aplikacije za zaznavanje, gibanje in opozarjanje.
Te vrste radijske opreme lahko delujejo v frekvenčnih pasovih v razponu od 25 MHz do 1000 MHz iz preglednice 1:
– z radiofrekvenčno (RF) izhodno povezavo in ustrezno anteno ali z vgrajeno anteno;
– za vse vrste modulacije;
– z govorom ali brez.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) -
Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 220-2 Version 2.4.1SIST EN 300 220-2 V2.4.1:2012en01-september-2012SIST EN 300 220-2 V2.4.1:2012SLOVENSKI
STANDARD
SIST EN 300 220-2 V2.4.1:2012
ETSI EN 300 220-2 V2.4.1 (2012-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
Harmonized European Standard SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 2
Reference REN/ERM-TG28-435 Keywords radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2012. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 5 1 Scope . 6 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 8 3.3 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter requirements . 8 4.2.1.1 Frequency error and frequency drift . 8 4.2.1.2 Average power (conducted) . 9 4.2.1.3 Effective radiated power . 9 4.2.1.4 Types of spread spectrum modulation. 9 4.2.1.4.1 Frequency Hopping Spread Spectrum devices (FHSS) . 9 4.2.1.4.2 Direct sequence or other spread spectrum than FHSS . 9 4.2.1.5 Transient Power . 9 4.2.1.6 Adjacent channel power . 9 4.2.1.7 Modulation bandwidth . 9 4.2.1.8 Unwanted emissions in the spurious domain . 9 4.2.1.9 Frequency stability under low-voltage conditions . 10 4.2.1.10 Duty cycle . 10 4.2.1.11 Listen Before Talk (LBT) . 10 4.2.1.11.1 Minimum transmitter off-time . 10 4.2.1.11.2 Minimum listening time . 10 4.2.1.11.3 Maximum dead time . 10 4.2.1.11.4 Maximum transmitter on-time . 10 4.2.1.11.5 Time-out-timer . 10 4.3 Receiver requirements . 11 4.3.1 Receiver categories . 11 4.3.2 Receiver sensitivity . 11 4.3.3 Receiver LBT threshold . 11 4.3.4 Adjacent channel selectivity . 11 4.3.5 Blocking . 11 4.3.6 Spurious response rejection . 11 4.3.7 Spurious radiations . 12 5 Testing for compliance with technical requirements . 12 5.1 Description testing for compliance with technical requirements . 12 5.1.1 Environmental conditions for testing . 12 5.1.1.1 Normal and extreme test-conditions. 12 5.1.1.2 Test power source . 12 5.1.2 Choice of samples for test suites . 12 5.1.3 Transmitter test suites . 12 5.1.3.1 Frequency error and drift . 12 5.1.3.2 Average power (conducted) . 12 5.1.3.3 Effective radiated power . 13 5.1.3.4 Transient power . 13 5.1.3.5 Adjacent channel power . 13 SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 4 5.1.3.6 Modulation bandwidth . 13 5.1.3.7 Unwanted emissions in the spurious domain . 13 5.1.3.8 Frequency stability under low-voltage conditions . 13 5.1.4 Receiver test suites. 13 5.1.4.1 Receiver sensitivity . 13 5.1.4.2 Receiver LBT threshold . 13 5.1.4.3 Adjacent channel selectivity. 14 5.1.4.4 Blocking . 14 5.1.4.5 Spurious response rejection . 14 5.1.4.6 Receiver spurious radiation . 14 5.2 Interpretation of measurement results . 14 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 15 Annex B (informative): Void . 18 Annex C (informative): Bibliography . 19 History . 20
SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.7]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The present document is part 2 of a multi-part deliverable covering the Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 8 May 2012 Date of latest announcement of this EN (doa): 31 August 2012 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
28 February 2013 Date of withdrawal of any conflicting National Standard (dow): 28 February 2014
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The modular structure is shown in EG 201 399 [i.5]. SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 6 1 Scope The present document applies to the following Short Range Device major equipment types: 1) Non-specific Short Range Devices. 2) Alarms, identification systems, radio-determination, telecommand, telemetry, etc. 3) Radio Frequency Identification (RFID). 4) Detection, movement and alert applications. These radio equipment types are capable of operating in the frequency bands within the 25 MHz to 1 000 MHz range as specified in table 1: • either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna; • for all types of modulation; • with or without speech. Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission Decisions [i.3] and [i.4] and the CEPT/ERC/REC 70-03 [i.6] as known at the date of publication of the present document. NOTE 1: It should be noted that table 1 represents the most widely implemented position within the European Union and the CEPT countries, but it should not be assumed that all designated bands are available in all countries. Table 1: Frequency bands commonly designated to Short Range Devices within 25 MHz to 1 000 MHz
Frequency Bands/Frequencies Applications Transmit and Receive 26,995 MHz, 27,045 MHz, 27,095 MHz, 27,145 MHz, 27,195 MHz, 34,995 MHz to 35,225 MHz, 40,665 MHz, 40,675 MHz, 40,685 MHz, 40,695 MHz Model control Transmit and Receive 26,957 MHz to 27,283 MHz Non-specific use Transmit and Receive 40,660 MHz to 40,700 MHz Non-specific use Transmit and Receive 138,200 MHz to 138,450 MHz Non-specific use Transmit and Receive 169,400 MHz to 169,475 MHz Tracking, tracing and data acquisition and meter reading Transmit and Receive 169,475 MHz to 169,4875 MHz Social alarms Transmit and Receive 169,5875 MHz to 169,6000 MHz Social alarms Transmit and Receive 433,050 MHz to 434,790 MHz Non-specific use Transmit and Receive 863,000 MHz to 870,000 MHz Non-specific use Transmit and Receive 864,800 MHz to 865,000 MHz Wireless audio applications Transmit and Receive 868,000 MHz to 868,600 MHz Non-specific use Transmit and Receive 868,600 MHz to 868,700 MHz Alarms Transmit and Receive 868,700 MHz to 869,200 MHz Non-specific use Transmit and Receive 869,200 MHz to 869,250 MHz Social alarms Transmit and Receive 869,250 MHz to 869,300 MHz Alarms (0,1 % duty cycle) Transmit and Receive 869,300 MHz to 869,400 MHz Alarms (1 % duty cycle) Transmit and Receive 869,400 MHz to 869,650 MHz Non-specific use Transmit and Receive 869,650 MHz to 869,700 MHz
Alarms
NOTE 2: In addition, it should be noted that other frequency bands may be available in a country within the frequency range 25 MHz to 1 000 MHz for SRD covered by the present document. See European Commission Decisions on Short Range Devices [i.3] and [i.4] and CEPT/ERC/REC 70-03 [i.6] as implemented through National Radio Interfaces (NRI) or additional NRI as relevant. SIST EN 300 220-2 V2.4.1:2012
ETSI ETSI EN 300 220-2 V2.4.1 (2012-05) 7 NOTE 3: On non-harmonized parameters, national administrations may impose certain conditions such as the type of modulation, frequency, channel/frequency separations, maximum transmitter radiated power, duty cycle, and the inclusion of an automatic transmitter shut-off facility, as a condition for the issue of Individual Rights for use of spectrum or General Authorization, or as a condition for use under "licence exemption" as it is in most cases for Short Range Devices. The present document covers fixed stations, mobile stations and portable stations. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.1]
(R&TTE Directive). The present document does not apply to radio equipment for which a specific Harmonized EN applies as such Harmonized EN may specify additional EN requirements relevant to the presumption of conformity under article 3.2 of the R&TTE Directive [i.1]. NOTE 4: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] ETSI EN 300 220-1 (V2.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.3] Commission Decision 2006/771/EC on harmonization of the radio spectrum for use by short-range devices as amended by subsequent Commission Decisions. [i.4] C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.