SIST EN ISO 15874-3:2004

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)

This part of EN (155 WI 025) specifies the characteristics of fittings made from polypropylene (PP) for piping systems intended to be used for hot and cold water installations in and around buildings (domestic systems) and for the conveyance of water, whether or not intended for human consumption, under operating pressures and temperatures according to the class of application.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 3: Formstücke (ISO 15874-3:2003)

Dieser Teil der EN (155 WI 025) legt die Anforderungen an Formstücke aus Polypropylen (PP), aus anderen geeigneten Kunststoffen oder aus anderen Werkstoffen für die Verlegung von Warm- und Kaltwasserleitungen innerhalb und im Umfeld von Gebäuden (Hausinstallations- und Heizungssysteme) fest, für den Transport von Wasser, welches entweder für den menschlichen Gebrauch bestimmt ist oder nicht, unter Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse.

Systemes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylene (PP) - Partie 3: Raccords (ISO 15874-3:2003)

La présente partie de l'EN (155 WI 025) spécifie les caractéristiques des raccords en polypropylene (PP) pour les systemes de canalisations destinés aux installations d'eau chaude et froide a l'intérieur et autour des bâtiments (systemes domestiques) ainsi qu'au transport de l'eau destinée ou non a la consommation humaine, a des pressions et des températures de service correspondant a la classe d'application.

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2004
• Withdrawal Date: 12-Mar-2013
• ICS: 23.040.45 - Plastics fittings
• ICS: 91.140.60 - Water supply systems
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Mar-2013
• Due Date: 05-Apr-2013
• Completion Date: 13-Mar-2013
• Directive: 89/106/EEC - Construction products
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Ref Project: EN ISO 15874-3:2003 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)

Relations

• Amended By: SIST EN ISO 15874-3:2004/oprA1:2006 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2003/DAM 1:2006)
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 15874-3:2013 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
• Effective Date: 01-Apr-2013
• Amended By: SIST EN ISO 15874-3:2004/oprA1:2006 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2003/DAM 1:2006)
• Effective Date: 08-Jun-2022
• Amended By: SIST EN ISO 15874-3:2004/kprA1:2009 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2003/FDAM 1:2009)
• Effective Date: 08-Jun-2022
• Amended By: SIST EN ISO 15874-3:2004/kprA1:2009 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2003/FDAM 1:2009)
• Effective Date: 01-Jun-2009