SIST EN 60644:2010/A1:2020
(Amendment)Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:2009/A1:2019)
Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:2009/A1:2019)
Anforderungen für Hochspannungs-Sicherungseinsätze für Motorstromkreise (IEC 60644:2009/A1:2019)
Spécification relative aux éléments de remplacement à haute tension destinés à des circuits comprenant des moteurs (IEC 60644:2009/A1:2019)
Specifikacija visokonapetostnih taljivih vložkov za zaščito električnih motorjev (IEC 60644:2009/A1:2019)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60644:2010/A1:2020
01-julij-2020
Specifikacija visokonapetostnih taljivih vložkov za zaščito električnih motorjev
(IEC 60644:2009/A1:2019)
Specification for high-voltage fuse-links for motor circuit applications (IEC
60644:2009/A1:2019)
Anforderungen für Hochspannungs-Sicherungseinsätze für Motorstromkreise (IEC
60644:2009/A1:2019)
Spécification relative aux éléments de remplacement à haute tension destinés à des
circuits comprenant des moteurs (IEC 60644:2009/A1:2019)
Ta slovenski standard je istoveten z: EN 60644:2009/A1:2019
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
SIST EN 60644:2010/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60644:2010/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 60644:2010/A1:2020
EUROPEAN STANDARD EN 60644:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2019
ICS 29.120.50
English Version
Specification for high-voltage fuse-links for motor circuit
applications
(IEC 60644:2009/A1:2019)
Spécification relative aux éléments de remplacement à Anforderungen für Hochspannungs-Sicherungseinsätze für
haute tension destinés à des circuits comprenant des Motorstromkreise
moteurs (IEC 60644:2009/A1:2019)
(IEC 60644:2009/A1:2019)
This amendment A1 modifies the European Standard EN 60644:2009; it was approved by CENELEC on 28 October 2019. CEN and
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CEN and CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and United Kingdom
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELEC CENELEC Members.
Ref. No. EN 60644:2009/A1:2019 E
---------------------- Page: 3 ----------------------
SIST EN 60644:2010/A1:2020
EN 60644:2009/A1:2019 (E)
European foreword
The text of document 32A/340/CDV, future IEC 60644/A1, prepared by SC 32A "High-voltage fuses"
of IEC/TC 32 "Fuses" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 60644:2009/A1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60644:2009/A1:2019 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60644:2010/A1:2020
EN 60644:2009/A1:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
...
SLOVENSKI STANDARD
SIST EN 60644:2010/oprA1:2018
01-december-2018
6SHFLILNDFLMDYLVRNRQDSHWRVWQLKWDOMLYLKYORåNRY]DHOHNWULþQDYH]MDPRWRUMHY
Specification for high-voltage fuse-links for motor circuit applications
Spécification relative aux éléments de remplacement à haute tension destinés à des
circuits comprenant des moteurs
Ta slovenski standard je istoveten z: EN 60644:2009/prA1:2018
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 60644:2010/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60644:2010/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 60644:2010/oprA1:2018
32A/340/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60644/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2018-10-12 2019-01-04
SUPERSEDES DOCUMENTS:
32A/328/CD,32A/332/CC
IEC SC 32A : HIGH-VOLTAGE FUSES
SECRETARIAT: SECRETARY:
France Mr Raphaël Buisson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 17A
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Specification for high-voltage fuse-links for motor circuit applications
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2018 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 60644:2010/oprA1:2018
IEC CDV 60644/AMD1 ED2 IEC: 2017 – 2 – 32A/340/CDV
1
2 INTERNATIONAL ELECTROTECHNICAL COMMISSION
3 ____________
4
5 SPECIFICATION FOR HIGH-VOLTAGE FUSE-LINKS
6 FOR MOTOR CIRCUIT APPLICATIONS
7
8 FOREWORD
9 This amendment has been prepared by subcommittee 32A: High-voltage Fuses, of IEC technical
10 committee 32: Fuses.
11 The text of this amendment is based on the following documents:
FDIS Report on voting
32A/XXX/FDIS 32A/XXX/RVD
12
13 Full information on the voting for the approval of this amendment can be found in the report on voting
14 indicated in the above table.
15 The committee has decided that the contents of this amendment and the base publication will remain
16 unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the
17 data related to the specific publication. At this date, the publication will be
18 • reconfirmed,
19 • withdrawn,
20 • replaced
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.